[PATCH net-next] dt-bindings: net: Use consistent indentation in the example

From: Krzysztof Kozlowski <hidden>
Date: 2026-09-13 12:29:28

Correct indentation in the examples to consistent 2- or 4-spaces
indentation to fix dt-check-style warnings ("example 0
[indent-consistent] indent mismatch ...").  Preferred is 4-spaces, but
re-indenting entire example just for that is too much churn.

Signed-off-by: Krzysztof Kozlowski <redacted>
---
 .../bindings/net/brcm,asp-v2.0.yaml           |  2 +-
 .../bindings/net/cortina,gemini-ethernet.yaml | 52 ++++++--------
 .../bindings/net/dsa/renesas,rzn1-a5psw.yaml  |  4 +-
 .../bindings/net/intel,dwmac-plat.yaml        |  6 +-
 .../devicetree/bindings/net/mdio-gpio.yaml    | 16 ++---
 .../bindings/net/mscc,vsc7514-switch.yaml     |  8 +--
 .../devicetree/bindings/net/qcom,ipa.yaml     | 10 +--
 .../bindings/net/realtek,rtl82xx.yaml         |  6 +-
 .../bindings/net/socionext,uniphier-ave4.yaml | 32 ++++-----
 .../bindings/net/ti,cpsw-switch.yaml          | 70 +++++++++----------
 .../bindings/net/wireless/mediatek,mt76.yaml  | 32 ++++-----
 .../bindings/net/wireless/qcom,ath10k.yaml    |  2 +-
 12 files changed, 114 insertions(+), 126 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml b/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml
index a3db6d594c8c..7fcc564e820c 100644
--- a/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml
+++ b/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml

@@ -123,7 +123,7 @@ examples:
             phy0: ethernet-phy@1 {
                 reg = <1>;
             };
-       };
+        };
 
         mdio@ce14 {
             compatible = "brcm,asp-v2.1-mdio";

diff --git a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml
index f0b5bea2458d..da9bc170cd54 100644
--- a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml
+++ b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml

@@ -87,18 +87,6 @@ examples:
     #include <dt-bindings/interrupt-controller/irq.h>
     #include <dt-bindings/clock/cortina,gemini-clock.h>
     #include <dt-bindings/reset/cortina,gemini-reset.h>
-    mdio0: mdio {
-      #address-cells = <1>;
-      #size-cells = <0>;
-      phy0: ethernet-phy@1 {
-        reg = <1>;
-        device_type = "ethernet-phy";
-      };
-      phy1: ethernet-phy@3 {
-        reg = <3>;
-        device_type = "ethernet-phy";
-      };
-    };
 
     ethernet@60000000 {
         compatible = "cortina,gemini-ethernet";

@@ -110,28 +98,28 @@ examples:
         ranges;
 
         gmac0: ethernet-port@0 {
-                compatible = "cortina,gemini-ethernet-port";
-                reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */
-                      <0x6000a000 0x2000>; /* Port 0 GMAC */
-                interrupt-parent = <&intcon>;
-                interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
-                resets = <&syscon GEMINI_RESET_GMAC0>;
-                clocks = <&syscon GEMINI_CLK_GATE_GMAC0>;
-                clock-names = "PCLK";
-                phy-mode = "rgmii";
-                phy-handle = <&phy0>;
+            compatible = "cortina,gemini-ethernet-port";
+            reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */
+                  <0x6000a000 0x2000>; /* Port 0 GMAC */
+            interrupt-parent = <&intcon>;
+            interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+            resets = <&syscon GEMINI_RESET_GMAC0>;
+            clocks = <&syscon GEMINI_CLK_GATE_GMAC0>;
+            clock-names = "PCLK";
+            phy-mode = "rgmii";
+            phy-handle = <&phy0>;
         };
 
         gmac1: ethernet-port@1 {
-                compatible = "cortina,gemini-ethernet-port";
-                reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */
-                      <0x6000e000 0x2000>; /* Port 1 GMAC */
-                interrupt-parent = <&intcon>;
-                interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
-                resets = <&syscon GEMINI_RESET_GMAC1>;
-                clocks = <&syscon GEMINI_CLK_GATE_GMAC1>;
-                clock-names = "PCLK";
-                phy-mode = "rgmii";
-                phy-handle = <&phy1>;
+            compatible = "cortina,gemini-ethernet-port";
+            reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */
+                  <0x6000e000 0x2000>; /* Port 1 GMAC */
+            interrupt-parent = <&intcon>;
+            interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+            resets = <&syscon GEMINI_RESET_GMAC1>;
+            clocks = <&syscon GEMINI_CLK_GATE_GMAC1>;
+            clock-names = "PCLK";
+            phy-mode = "rgmii";
+            phy-handle = <&phy1>;
         };
     };

diff --git a/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
index ea285ef3e64f..fab6aa6237e9 100644
--- a/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml

@@ -127,8 +127,8 @@ examples:
                 phy-mode = "internal";
 
                 fixed-link {
-                  speed = <1000>;
-                  full-duplex;
+                    speed = <1000>;
+                    full-duplex;
                 };
             };
         };

diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
index 62c1da36a2b5..d1522216d32b 100644
--- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
+++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml

@@ -91,9 +91,9 @@ examples:
         snps,tx-queues-to-use = <2>;
         snps,tx-sched-wrr;
         queue0 {
-           snps,weight = <0x10>;
-           snps,dcb-algorithm;
-           snps,priority = <0x0>;
+            snps,weight = <0x10>;
+            snps,dcb-algorithm;
+            snps,priority = <0x0>;
         };
 
         queue1 {

diff --git a/Documentation/devicetree/bindings/net/mdio-gpio.yaml b/Documentation/devicetree/bindings/net/mdio-gpio.yaml
index eb4171a1940e..36e51aaae9c0 100644
--- a/Documentation/devicetree/bindings/net/mdio-gpio.yaml
+++ b/Documentation/devicetree/bindings/net/mdio-gpio.yaml

@@ -45,13 +45,13 @@ examples:
     };
 
     mdio0: mdio {
-      compatible = "virtual,mdio-gpio";
-      #address-cells = <1>;
-      #size-cells = <0>;
-      gpios = <&qe_pio_a 11>,
-              <&qe_pio_c 6>;
-      ethphy0: ethernet-phy@0 {
-        reg = <0>;
-      };
+        compatible = "virtual,mdio-gpio";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        gpios = <&qe_pio_a 11>,
+                <&qe_pio_c 6>;
+        ethphy0: ethernet-phy@0 {
+            reg = <0>;
+        };
     };
 ...

diff --git a/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml b/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml
index 86a9c3fc76c8..d825130b54b4 100644
--- a/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml
+++ b/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml

@@ -197,10 +197,10 @@ examples:
             <0x71040000 0x10000>,
             <0x71050000 0x10000>,
             <0x71060000 0x10000>;
-            reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
-            "port2", "port3", "port4", "port5", "port6",
-            "port7", "port8", "port9", "port10", "qsys",
-            "ana", "s0", "s1", "s2";
+      reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
+                  "port2", "port3", "port4", "port5", "port6",
+                  "port7", "port8", "port9", "port10", "qsys",
+                  "ana", "s0", "s1", "s2";
 
       ethernet-ports {
         #address-cells = <1>;

diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
index 68ec76fe4473..38e3830512fe 100644
--- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml

@@ -246,14 +246,14 @@ examples:
         qcom,remote-pid = <5>;
 
         ipa_smp2p_out: ipa-ap-to-modem {
-                qcom,entry-name = "ipa";
-                #qcom,smem-state-cells = <1>;
+            qcom,entry-name = "ipa";
+            #qcom,smem-state-cells = <1>;
         };
 
         ipa_smp2p_in: ipa-modem-to-ap {
-                qcom,entry-name = "ipa";
-                interrupt-controller;
-                #interrupt-cells = <2>;
+            qcom,entry-name = "ipa";
+            interrupt-controller;
+            #interrupt-cells = <2>;
         };
     };

diff --git a/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml b/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml
index 45033c31a2d5..07b39ef1fc62 100644
--- a/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml
+++ b/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml

@@ -91,8 +91,8 @@ examples:
         #size-cells = <0>;
 
         ethphy1: ethernet-phy@1 {
-                reg = <1>;
-                realtek,clkout-disable;
-                realtek,aldps-enable;
+            reg = <1>;
+            realtek,clkout-disable;
+            realtek,aldps-enable;
         };
     };

diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml
index 4eb63b303cff..8c8622160abb 100644
--- a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml
+++ b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml

@@ -121,22 +121,22 @@ examples:
   - |
     ether: ethernet@65000000 {
         compatible = "socionext,uniphier-ld20-ave4";
-                reg = <0x65000000 0x8500>;
-                interrupts = <0 66 4>;
-                phy-mode = "rgmii";
-                phy-handle = <&ethphy>;
-                clock-names = "ether";
-                clocks = <&sys_clk 6>;
-                reset-names = "ether";
-                resets = <&sys_rst 6>;
-                socionext,syscon-phy-mode = <&soc_glue 0>;
+        reg = <0x65000000 0x8500>;
+        interrupts = <0 66 4>;
+        phy-mode = "rgmii";
+        phy-handle = <&ethphy>;
+        clock-names = "ether";
+        clocks = <&sys_clk 6>;
+        reset-names = "ether";
+        resets = <&sys_rst 6>;
+        socionext,syscon-phy-mode = <&soc_glue 0>;
 
-                mdio {
-                        #address-cells = <1>;
-                        #size-cells = <0>;
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;
 
-                        ethphy: ethernet-phy@1 {
-                                reg = <1>;
-                        };
-                };
+            ethphy: ethernet-phy@1 {
+                reg = <1>;
+            };
         };
+    };

diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
index 8b5da602a2e8..4d24dadfaa5d 100644
--- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
+++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml

@@ -192,50 +192,50 @@ examples:
         interrupt-names = "rx_thresh", "rx", "tx", "misc";
 
         ethernet-ports {
-                #address-cells = <1>;
-                #size-cells = <0>;
+            #address-cells = <1>;
+            #size-cells = <0>;
 
-                cpsw_port1: port@1 {
-                        reg = <1>;
-                        label = "port1";
-                        mac-address = [ 00 00 00 00 00 00 ];
-                        phys = <&phy_gmii_sel 1>;
-                        phy-handle = <&ethphy0_sw>;
-                        phy-mode = "rgmii";
-                        ti,dual-emac-pvid = <1>;
-                };
+            cpsw_port1: port@1 {
+                reg = <1>;
+                label = "port1";
+                mac-address = [ 00 00 00 00 00 00 ];
+                phys = <&phy_gmii_sel 1>;
+                phy-handle = <&ethphy0_sw>;
+                phy-mode = "rgmii";
+                ti,dual-emac-pvid = <1>;
+            };
 
-                cpsw_port2: port@2 {
-                        reg = <2>;
-                        label = "wan";
-                        mac-address = [ 00 00 00 00 00 00 ];
-                        phys = <&phy_gmii_sel 2>;
-                        phy-handle = <&ethphy1_sw>;
-                        phy-mode = "rgmii";
-                        ti,dual-emac-pvid = <2>;
-                };
+            cpsw_port2: port@2 {
+                reg = <2>;
+                label = "wan";
+                mac-address = [ 00 00 00 00 00 00 ];
+                phys = <&phy_gmii_sel 2>;
+                phy-handle = <&ethphy1_sw>;
+                phy-mode = "rgmii";
+                ti,dual-emac-pvid = <2>;
+            };
         };
 
         davinci_mdio_sw: mdio@1000 {
-                compatible = "ti,cpsw-mdio","ti,davinci_mdio";
-                reg = <0x1000 0x100>;
-                clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 0>;
-                clock-names = "fck";
-                #address-cells = <1>;
-                #size-cells = <0>;
-                bus_freq = <1000000>;
+            compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+            reg = <0x1000 0x100>;
+            clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 0>;
+            clock-names = "fck";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            bus_freq = <1000000>;
 
-                ethphy0_sw: ethernet-phy@0 {
-                        reg = <0>;
-                };
+            ethphy0_sw: ethernet-phy@0 {
+                reg = <0>;
+            };
 
-                ethphy1_sw: ethernet-phy@1 {
-                        reg = <1>;
-                };
+            ethphy1_sw: ethernet-phy@1 {
+                reg = <1>;
+            };
         };
 
         cpts {
-                clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 25>;
-                clock-names = "cpts";
+            clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 25>;
+            clock-names = "cpts";
         };
     };

diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
index ae6b97cdc44b..bf4116b057d2 100644
--- a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml

@@ -325,22 +325,22 @@ examples:
           r0 {
             regdomain = "FCC";
             txpower-5g {
-               b0 {
-                   channels = <36 48>;
-                   rates-ofdm = /bits/ 8 <23 23 23 23 23 23 23 23>;
-                   rates-mcs = /bits/ 8 <1 23 23 23 23 23 23 23 23 23 23>,
-                               /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22>;
-                   rates-ru = /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22 22 22>,
-                              /bits/ 8 <4 20 20 20 20 20 20 20 20 20 20 20 20>;
-               };
-               b1 {
-                   channels = <100 181>;
-                   rates-ofdm = /bits/ 8 <14 14 14 14 14 14 14 14>;
-                   rates-mcs = /bits/ 8  <4 14 14 14 14 14 14 14 14 14 14>;
-                   txs-delta = <12 9 6>;
-                   rates-ru = /bits/ 8  <7 14 14 14 14 14 14 14 14 14 14 14 14>;
-               };
-             };
+              b0 {
+                channels = <36 48>;
+                rates-ofdm = /bits/ 8 <23 23 23 23 23 23 23 23>;
+                rates-mcs = /bits/ 8 <1 23 23 23 23 23 23 23 23 23 23>,
+                            /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22>;
+                rates-ru = /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22 22 22>,
+                           /bits/ 8 <4 20 20 20 20 20 20 20 20 20 20 20 20>;
+              };
+              b1 {
+                channels = <100 181>;
+                rates-ofdm = /bits/ 8 <14 14 14 14 14 14 14 14>;
+                rates-mcs = /bits/ 8  <4 14 14 14 14 14 14 14 14 14 14>;
+                txs-delta = <12 9 6>;
+                rates-ru = /bits/ 8  <7 14 14 14 14 14 14 14 14 14 14 14 14>;
+              };
+            };
           };
         };
       };

diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
index e667d78b3ab3..a52cb8a0d409 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml

@@ -408,4 +408,4 @@ examples:
                           "msi15",
                           "legacy";
         ieee80211-freq-limit = <5470000 5875000>;
-      };
+    };

-- 
2.53.0

RE: [PATCH net-next] dt-bindings: net: Use consistent indentation in the example

From: Claudiu Manoil <claudiu.manoil@nxp.com>
Date: 2026-09-14 09:14:53



NXP Confidential

quoted hunk

-----Original Message-----
From: Krzysztof Kozlowski <redacted>
Sent: Sunday, September 13, 2026 3:29 PM
To: Rob Clark <robin.clark@oss.qualcomm.com>; Dmitry Baryshkov
[off-list ref]; Abhinav Kumar [off-list ref]; Jessica
Zhang [off-list ref]; Sean Paul [off-list ref]; Marijn
Suijten [off-list ref]; David Airlie [off-list ref];
Simona Vetter [off-list ref]; Maarten Lankhorst
[off-list ref]; Maxime Ripard [off-list ref];
Thomas Zimmermann [off-list ref]; Rob Herring
[off-list ref]; Krzysztof Kozlowski [off-list ref]; Conor Dooley
[off-list ref]; Justin Chen [off-list ref]; Florian
Fainelli [off-list ref]; Andrew Lunn
[off-list ref]; David S. Miller [off-list ref]; Eric
Dumazet [off-list ref]; Jakub Kicinski [off-list ref]; Paolo
Abeni [off-list ref]; Hans Ulli Kroll [off-list ref];
Linus Walleij [off-list ref]; Clément Léger
[off-list ref]; Vladimir Oltean [off-list ref]; Heiner
Kallweit [off-list ref]; Russell King [off-list ref];
Kunihiko Hayashi [off-list ref]; Masami Hiramatsu
[off-list ref]; Felix Fietkau [off-list ref]; Lorenzo Bianconi
[off-list ref]; Ryder Lee [off-list ref]; Shayne Chen
[off-list ref]; Sean Wang [off-list ref];
Johannes Berg [off-list ref]; Matthias Brugger
[off-list ref]; AngeloGioacchino Del Regno
[off-list ref]; Jeff Johnson
[off-list ref]; Richard Cochran [off-list ref]; Geert
Uytterhoeven [off-list ref]; Magnus Damm
[off-list ref]; Yongxing Mou
[off-list ref]; Robert Foss [off-list ref]; Abel
Vesa [off-list ref]; G. Jaya Kumaran
[off-list ref]; Claudiu Manoil
[off-list ref]; Alexandre Belloni
[off-list ref]; Alex Elder [off-list ref]; Siddharth
Vadapalli [off-list ref]; Roger Quadros [off-list ref]; linux-
arm-msm@vger.kernel.org; dri-devel@lists.freedesktop.org;
freedreno@lists.freedesktop.org; devicetree@vger.kernel.org; linux-
kernel@vger.kernel.org; bcm-kernel-feedback-list@broadcom.com;
netdev@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-renesas-
soc@vger.kernel.org; linux-wireless@vger.kernel.org; linux-
mediatek@lists.infradead.org; ath10k@lists.infradead.org
Cc: Krzysztof Kozlowski <redacted>
Subject: [PATCH net-next] dt-bindings: net: Use consistent indentation in the
example

Correct indentation in the examples to consistent 2- or 4-spaces
indentation to fix dt-check-style warnings ("example 0
[indent-consistent] indent mismatch ...").  Preferred is 4-spaces, but
re-indenting entire example just for that is too much churn.

Signed-off-by: Krzysztof Kozlowski
[off-list ref]
---
 .../bindings/net/brcm,asp-v2.0.yaml           |  2 +-
 .../bindings/net/cortina,gemini-ethernet.yaml | 52 ++++++--------
 .../bindings/net/dsa/renesas,rzn1-a5psw.yaml  |  4 +-
 .../bindings/net/intel,dwmac-plat.yaml        |  6 +-
 .../devicetree/bindings/net/mdio-gpio.yaml    | 16 ++---
 .../bindings/net/mscc,vsc7514-switch.yaml     |  8 +--
 .../devicetree/bindings/net/qcom,ipa.yaml     | 10 +--
 .../bindings/net/realtek,rtl82xx.yaml         |  6 +-
 .../bindings/net/socionext,uniphier-ave4.yaml | 32 ++++-----
 .../bindings/net/ti,cpsw-switch.yaml          | 70 +++++++++----------
 .../bindings/net/wireless/mediatek,mt76.yaml  | 32 ++++-----
 .../bindings/net/wireless/qcom,ath10k.yaml    |  2 +-
 12 files changed, 114 insertions(+), 126 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml

b/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml
index a3db6d594c8c..7fcc564e820c 100644

--- a/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml
+++ b/Documentation/devicetree/bindings/net/brcm,asp-v2.0.yaml

@@ -123,7 +123,7 @@ examples:
             phy0: ethernet-phy@1 {
                 reg = <1>;
             };
-       };
+        };

         mdio@ce14 {
             compatible = "brcm,asp-v2.1-mdio";

diff --git a/Documentation/devicetree/bindings/net/cortina,gemini-

ethernet.yaml b/Documentation/devicetree/bindings/net/cortina,gemini-
ethernet.yaml
index f0b5bea2458d..da9bc170cd54 100644

--- a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml
+++ b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml

@@ -87,18 +87,6 @@ examples:
     #include <dt-bindings/interrupt-controller/irq.h>
     #include <dt-bindings/clock/cortina,gemini-clock.h>
     #include <dt-bindings/reset/cortina,gemini-reset.h>
-    mdio0: mdio {
-      #address-cells = <1>;
-      #size-cells = <0>;
-      phy0: ethernet-phy@1 {
-        reg = <1>;
-        device_type = "ethernet-phy";
-      };
-      phy1: ethernet-phy@3 {
-        reg = <3>;
-        device_type = "ethernet-phy";
-      };
-    };

     ethernet@60000000 {
         compatible = "cortina,gemini-ethernet";

@@ -110,28 +98,28 @@ examples:
         ranges;

         gmac0: ethernet-port@0 {
-                compatible = "cortina,gemini-ethernet-port";
-                reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */
-                      <0x6000a000 0x2000>; /* Port 0 GMAC */
-                interrupt-parent = <&intcon>;
-                interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
-                resets = <&syscon GEMINI_RESET_GMAC0>;
-                clocks = <&syscon GEMINI_CLK_GATE_GMAC0>;
-                clock-names = "PCLK";
-                phy-mode = "rgmii";
-                phy-handle = <&phy0>;
+            compatible = "cortina,gemini-ethernet-port";
+            reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */
+                  <0x6000a000 0x2000>; /* Port 0 GMAC */
+            interrupt-parent = <&intcon>;
+            interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+            resets = <&syscon GEMINI_RESET_GMAC0>;
+            clocks = <&syscon GEMINI_CLK_GATE_GMAC0>;
+            clock-names = "PCLK";
+            phy-mode = "rgmii";
+            phy-handle = <&phy0>;
         };

         gmac1: ethernet-port@1 {
-                compatible = "cortina,gemini-ethernet-port";
-                reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */
-                      <0x6000e000 0x2000>; /* Port 1 GMAC */
-                interrupt-parent = <&intcon>;
-                interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
-                resets = <&syscon GEMINI_RESET_GMAC1>;
-                clocks = <&syscon GEMINI_CLK_GATE_GMAC1>;
-                clock-names = "PCLK";
-                phy-mode = "rgmii";
-                phy-handle = <&phy1>;
+            compatible = "cortina,gemini-ethernet-port";
+            reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */
+                  <0x6000e000 0x2000>; /* Port 1 GMAC */
+            interrupt-parent = <&intcon>;
+            interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+            resets = <&syscon GEMINI_RESET_GMAC1>;
+            clocks = <&syscon GEMINI_CLK_GATE_GMAC1>;
+            clock-names = "PCLK";
+            phy-mode = "rgmii";
+            phy-handle = <&phy1>;
         };
     };

diff --git a/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-

a5psw.yaml b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-
a5psw.yaml
index ea285ef3e64f..fab6aa6237e9 100644

--- a/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-

a5psw.yaml

@@ -127,8 +127,8 @@ examples:
                 phy-mode = "internal";

                 fixed-link {
-                  speed = <1000>;
-                  full-duplex;
+                    speed = <1000>;
+                    full-duplex;
                 };
             };
         };

diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml

b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
index 62c1da36a2b5..d1522216d32b 100644

--- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
+++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml

@@ -91,9 +91,9 @@ examples:
         snps,tx-queues-to-use = <2>;
         snps,tx-sched-wrr;
         queue0 {
-           snps,weight = <0x10>;
-           snps,dcb-algorithm;
-           snps,priority = <0x0>;
+            snps,weight = <0x10>;
+            snps,dcb-algorithm;
+            snps,priority = <0x0>;
         };

         queue1 {

diff --git a/Documentation/devicetree/bindings/net/mdio-gpio.yaml

b/Documentation/devicetree/bindings/net/mdio-gpio.yaml
index eb4171a1940e..36e51aaae9c0 100644

--- a/Documentation/devicetree/bindings/net/mdio-gpio.yaml
+++ b/Documentation/devicetree/bindings/net/mdio-gpio.yaml

@@ -45,13 +45,13 @@ examples:
     };

     mdio0: mdio {
-      compatible = "virtual,mdio-gpio";
-      #address-cells = <1>;
-      #size-cells = <0>;
-      gpios = <&qe_pio_a 11>,
-              <&qe_pio_c 6>;
-      ethphy0: ethernet-phy@0 {
-        reg = <0>;
-      };
+        compatible = "virtual,mdio-gpio";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        gpios = <&qe_pio_a 11>,
+                <&qe_pio_c 6>;
+        ethphy0: ethernet-phy@0 {
+            reg = <0>;
+        };
     };
 ...

diff --git a/Documentation/devicetree/bindings/net/mscc,vsc7514-

switch.yaml b/Documentation/devicetree/bindings/net/mscc,vsc7514-
switch.yaml
index 86a9c3fc76c8..d825130b54b4 100644

--- a/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml
+++ b/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml

@@ -197,10 +197,10 @@ examples:
             <0x71040000 0x10000>,
             <0x71050000 0x10000>,
             <0x71060000 0x10000>;
-            reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
-            "port2", "port3", "port4", "port5", "port6",
-            "port7", "port8", "port9", "port10", "qsys",
-            "ana", "s0", "s1", "s2";
+      reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
+                  "port2", "port3", "port4", "port5", "port6",
+                  "port7", "port8", "port9", "port10", "qsys",
+                  "ana", "s0", "s1", "s2";

       ethernet-ports {
         #address-cells = <1>;

diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml

b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
index 68ec76fe4473..38e3830512fe 100644

--- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml

@@ -246,14 +246,14 @@ examples:
         qcom,remote-pid = <5>;

         ipa_smp2p_out: ipa-ap-to-modem {
-                qcom,entry-name = "ipa";
-                #qcom,smem-state-cells = <1>;
+            qcom,entry-name = "ipa";
+            #qcom,smem-state-cells = <1>;
         };

         ipa_smp2p_in: ipa-modem-to-ap {
-                qcom,entry-name = "ipa";
-                interrupt-controller;
-                #interrupt-cells = <2>;
+            qcom,entry-name = "ipa";
+            interrupt-controller;
+            #interrupt-cells = <2>;
         };
     };

diff --git a/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml

b/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml
index 45033c31a2d5..07b39ef1fc62 100644

--- a/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml
+++ b/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml

@@ -91,8 +91,8 @@ examples:
         #size-cells = <0>;

         ethphy1: ethernet-phy@1 {
-                reg = <1>;
-                realtek,clkout-disable;
-                realtek,aldps-enable;
+            reg = <1>;
+            realtek,clkout-disable;
+            realtek,aldps-enable;
         };
     };

diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-

ave4.yaml b/Documentation/devicetree/bindings/net/socionext,uniphier-
ave4.yaml
index 4eb63b303cff..8c8622160abb 100644

--- a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml
+++ b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml

@@ -121,22 +121,22 @@ examples:
   - |
     ether: ethernet@65000000 {
         compatible = "socionext,uniphier-ld20-ave4";
-                reg = <0x65000000 0x8500>;
-                interrupts = <0 66 4>;
-                phy-mode = "rgmii";
-                phy-handle = <&ethphy>;
-                clock-names = "ether";
-                clocks = <&sys_clk 6>;
-                reset-names = "ether";
-                resets = <&sys_rst 6>;
-                socionext,syscon-phy-mode = <&soc_glue 0>;
+        reg = <0x65000000 0x8500>;
+        interrupts = <0 66 4>;
+        phy-mode = "rgmii";
+        phy-handle = <&ethphy>;
+        clock-names = "ether";
+        clocks = <&sys_clk 6>;
+        reset-names = "ether";
+        resets = <&sys_rst 6>;
+        socionext,syscon-phy-mode = <&soc_glue 0>;

-                mdio {
-                        #address-cells = <1>;
-                        #size-cells = <0>;
+        mdio {
+            #address-cells = <1>;
+            #size-cells = <0>;

-                        ethphy: ethernet-phy@1 {
-                                reg = <1>;
-                        };
-                };
+            ethphy: ethernet-phy@1 {
+                reg = <1>;
+            };
         };
+    };

diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml

b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
index 8b5da602a2e8..4d24dadfaa5d 100644

--- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
+++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml

@@ -192,50 +192,50 @@ examples:
         interrupt-names = "rx_thresh", "rx", "tx", "misc";

         ethernet-ports {
-                #address-cells = <1>;
-                #size-cells = <0>;
+            #address-cells = <1>;
+            #size-cells = <0>;

-                cpsw_port1: port@1 {
-                        reg = <1>;
-                        label = "port1";
-                        mac-address = [ 00 00 00 00 00 00 ];
-                        phys = <&phy_gmii_sel 1>;
-                        phy-handle = <&ethphy0_sw>;
-                        phy-mode = "rgmii";
-                        ti,dual-emac-pvid = <1>;
-                };
+            cpsw_port1: port@1 {
+                reg = <1>;
+                label = "port1";
+                mac-address = [ 00 00 00 00 00 00 ];
+                phys = <&phy_gmii_sel 1>;
+                phy-handle = <&ethphy0_sw>;
+                phy-mode = "rgmii";
+                ti,dual-emac-pvid = <1>;
+            };

-                cpsw_port2: port@2 {
-                        reg = <2>;
-                        label = "wan";
-                        mac-address = [ 00 00 00 00 00 00 ];
-                        phys = <&phy_gmii_sel 2>;
-                        phy-handle = <&ethphy1_sw>;
-                        phy-mode = "rgmii";
-                        ti,dual-emac-pvid = <2>;
-                };
+            cpsw_port2: port@2 {
+                reg = <2>;
+                label = "wan";
+                mac-address = [ 00 00 00 00 00 00 ];
+                phys = <&phy_gmii_sel 2>;
+                phy-handle = <&ethphy1_sw>;
+                phy-mode = "rgmii";
+                ti,dual-emac-pvid = <2>;
+            };
         };

         davinci_mdio_sw: mdio@1000 {
-                compatible = "ti,cpsw-mdio","ti,davinci_mdio";
-                reg = <0x1000 0x100>;
-                clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 0>;
-                clock-names = "fck";
-                #address-cells = <1>;
-                #size-cells = <0>;
-                bus_freq = <1000000>;
+            compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+            reg = <0x1000 0x100>;
+            clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 0>;
+            clock-names = "fck";
+            #address-cells = <1>;
+            #size-cells = <0>;
+            bus_freq = <1000000>;

-                ethphy0_sw: ethernet-phy@0 {
-                        reg = <0>;
-                };
+            ethphy0_sw: ethernet-phy@0 {
+                reg = <0>;
+            };

-                ethphy1_sw: ethernet-phy@1 {
-                        reg = <1>;
-                };
+            ethphy1_sw: ethernet-phy@1 {
+                reg = <1>;
+            };
         };

         cpts {
-                clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 25>;
-                clock-names = "cpts";
+            clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 25>;
+            clock-names = "cpts";
         };
     };

diff --git
a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
index ae6b97cdc44b..bf4116b057d2 100644

--- a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml

@@ -325,22 +325,22 @@ examples:
           r0 {
             regdomain = "FCC";
             txpower-5g {
-               b0 {
-                   channels = <36 48>;
-                   rates-ofdm = /bits/ 8 <23 23 23 23 23 23 23 23>;
-                   rates-mcs = /bits/ 8 <1 23 23 23 23 23 23 23 23 23 23>,
-                               /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22>;
-                   rates-ru = /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22 22 22>,
-                              /bits/ 8 <4 20 20 20 20 20 20 20 20 20 20 20 20>;
-               };
-               b1 {
-                   channels = <100 181>;
-                   rates-ofdm = /bits/ 8 <14 14 14 14 14 14 14 14>;
-                   rates-mcs = /bits/ 8  <4 14 14 14 14 14 14 14 14 14 14>;
-                   txs-delta = <12 9 6>;
-                   rates-ru = /bits/ 8  <7 14 14 14 14 14 14 14 14 14 14 14 14>;
-               };
-             };
+              b0 {
+                channels = <36 48>;
+                rates-ofdm = /bits/ 8 <23 23 23 23 23 23 23 23>;
+                rates-mcs = /bits/ 8 <1 23 23 23 23 23 23 23 23 23 23>,
+                            /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22>;
+                rates-ru = /bits/ 8 <3 22 22 22 22 22 22 22 22 22 22 22 22>,
+                           /bits/ 8 <4 20 20 20 20 20 20 20 20 20 20 20 20>;
+              };
+              b1 {
+                channels = <100 181>;
+                rates-ofdm = /bits/ 8 <14 14 14 14 14 14 14 14>;
+                rates-mcs = /bits/ 8  <4 14 14 14 14 14 14 14 14 14 14>;
+                txs-delta = <12 9 6>;
+                rates-ru = /bits/ 8  <7 14 14 14 14 14 14 14 14 14 14 14 14>;
+              };
+            };
           };
         };
       };

diff --git
a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
index e667d78b3ab3..a52cb8a0d409 100644

--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.yaml

@@ -408,4 +408,4 @@ examples:
                           "msi15",
                           "legacy";
         ieee80211-freq-limit = <5470000 5875000>;
-      };
+    };
--

2.53.0

Re: [PATCH net-next] dt-bindings: net: Use consistent indentation in the example

From: Krzysztof Kozlowski <krzk@kernel.org>
Date: 2026-09-14 09:17:40

On 14/09/2026 11:14, Claudiu Manoil wrote:



NXP Confidential

No. Please fix your corpo systems or switch kindly to @linux.dev
https://korg.docs.kernel.org/linuxdev.html

You just top-posted with "confidential" and then quoted entire email.

Best regards,
Krzysztof

Re: [PATCH net-next] dt-bindings: net: Use consistent indentation in the example

From: netdev-bot+sashiko@kernel.org
Date: 2026-09-14 12:50:26

Thank you for your contribution! Sashiko AI review found 1 potential
issue(s) to consider:

Critical: 0 · High: 0 · Medium: 1 · Low: 0

- [Medium] In Documentation/devicetree/bindings/net/cortina,gemini-
  ethernet.yaml the patch does more than re-indent: it deletes the whole…

--

dt-bindings: net: Use consistent indentation in the example

This reindents the DT binding examples under Documentation/devicetree/
bindings/net/ to consistent 2- or 4-space indentation so that
dt-check-style stops reporting "indent mismatch" warnings.  Twelve
binding files are touched.

quoted hunk

diff --git a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml
index f0b5bea2458d5..da9bc170cd543 100644
--- a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml
+++ b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml

@@ -87,18 +87,6 @@ examples:
     #include <dt-bindings/interrupt-controller/irq.h>
     #include <dt-bindings/clock/cortina,gemini-clock.h>
     #include <dt-bindings/reset/cortina,gemini-reset.h>
-    mdio0: mdio {
-      #address-cells = <1>;
-      #size-cells = <0>;
-      phy0: ethernet-phy@1 {
-        reg = <1>;
-        device_type = "ethernet-phy";
-      };
-      phy1: ethernet-phy@3 {
-        reg = <3>;
-        device_type = "ethernet-phy";
-      };
-    };

[Severity: Medium]
Is this deletion intended?  The commit message says only:

    Correct indentation in the examples to consistent 2- or 4-spaces
    indentation to fix dt-check-style warnings

Every other hunk in the series is a pure whitespace shift with the brace
nesting preserved, but here the whole mdio0 node with phy0 and phy1 is
removed and nothing is added back.

Wouldn't re-indenting the mdio0 node to 4 spaces achieve the stated goal
without dropping the example content?

quoted hunk

     ethernet@60000000 {
         compatible = "cortina,gemini-ethernet";

@@ -110,28 +98,28 @@ examples:
         ranges;
 
         gmac0: ethernet-port@0 {

[ ... ]

quoted hunk

+            phy-mode = "rgmii";
+            phy-handle = <&phy0>;
         };

[Severity: Medium]
Do the surviving phy-handle properties in gmac0 and gmac1 now reference
labels that no longer exist in the file?  After this patch the file
contains:

    gmac0: ethernet-port@0 {
        ...
        phy-handle = <&phy0>;
    };

    gmac1: ethernet-port@1 {
        ...
        phy-handle = <&phy1>;
    };

but there is no longer any definition of phy0 or phy1 anywhere in
cortina,gemini-ethernet.yaml, and the example no longer shows the MDIO bus
and PHY topology it used to illustrate.

If the mdio0 removal is deliberate, could it go into a separate patch that
also updates the phy-handle references?

 
         gmac1: ethernet-port@1 {

[ ... ]

quoted hunk

+            phy-mode = "rgmii";
+            phy-handle = <&phy1>;
         };
     };

[ ... remaining files snipped, no comments ... ]

-- 
Sashiko AI review · https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260913122910.99457-3-krzysztof.kozlowski%40oss.qualcomm.com

Re: [PATCH net-next] dt-bindings: net: Use consistent indentation in the example

From: Krzysztof Kozlowski <hidden>
Date: 2026-09-14 15:52:43

On 14/09/2026 14:50, netdev-bot+sashiko@kernel.org wrote:

Thank you for your contribution! Sashiko AI review found 1 potential
issue(s) to consider:

Critical: 0 · High: 0 · Medium: 1 · Low: 0

- [Medium] In Documentation/devicetree/bindings/net/cortina,gemini-
  ethernet.yaml the patch does more than re-indent: it deletes the whole…

Overly long, it's like use the most words to explain something to waste
other people time... I really dislike this approach but did complain and
people disagreed.

Best regards,
Krzysztof

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help