[PATCH] USB: serial: option: NET: usb: qmi_wwan: add MeiG SRM813Q

Subsystems: networking drivers, the rest, usb networking drivers, usb qmi wwan network driver, usb serial subsystem, usb subsystem

STALE130d

7 messages, 3 authors, 2026-05-21 · open the first message on its own page

[PATCH] USB: serial: option: NET: usb: qmi_wwan: add MeiG SRM813Q

From: Jan Volckaert <hidden>
Date: 2026-05-08 13:32:23

Add support for the Qualcomm Technology Snapdragon X35-based MeiG SRM813Q module.

The module can be put in different modes via AT commands to enable/disable GPS functionality:

MODEM - PPP mode(2dee:4d63): AT+SER=1,1

If#= 0: RMNET
If#= 1: DIAG/ADB
If#= 2: MODEM
If#= 3: AT

P:  Vendor=2dee ProdID=4d63 Rev=05.15
S:  Manufacturer=MEIG
S:  Product=LTE-A Module
S:  SerialNumber=1bd51f0e
C:  #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms

NMEA mode(2dee:4d64): AT+SER=51,1

If#= 0: RMNET
If#= 1: DIAG/ADB
If#= 2: NMEA
If#= 3: AT

P:  Vendor=2dee ProdID=4d64 Rev=05.15
S:  Manufacturer=MEIG
S:  Product=LTE-A Module
S:  SerialNumber=1bd51f0e
C:  #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms

Signed-off-by: Jan Volckaert <redacted>
---
 drivers/net/usb/qmi_wwan.c  | 2 ++
 drivers/usb/serial/option.c | 6 ++++++
 2 files changed, 8 insertions(+)
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 05acac10cd2b..94cdb61dca83 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1452,6 +1452,8 @@ static const struct usb_device_id products[] = {
 	{QMI_QUIRK_SET_DTR(0x1546, 0x1342, 4)},	/* u-blox LARA-L6 */
 	{QMI_QUIRK_SET_DTR(0x33f8, 0x0104, 4)}, /* Rolling RW101 RMNET */
 	{QMI_FIXED_INTF(0x2dee, 0x4d22, 5)},    /* MeiG Smart SRM825L */
+	{QMI_QUIRK_SET_DTR(0x2dee, 0x4d63, 0)}, /* MeiG SRM813Q w/ Modem(PPP) */
+	{QMI_QUIRK_SET_DTR(0x2dee, 0x4d64, 0)}, /* MeiG SRM813Q w/ NMEA */
 
 	/* 4. Gobi 1000 devices */
 	{QMI_GOBI1K_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index c71461893d20..e3827b1e4f27 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2446,6 +2446,12 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d38, 0xff, 0xff, 0x30) },	/* MeiG Smart SRM825WN (Diag) */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d38, 0xff, 0xff, 0x40) },	/* MeiG Smart SRM825WN (AT) */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d38, 0xff, 0xff, 0x60) },	/* MeiG Smart SRM825WN (NMEA) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d63, 0xff, 0xff, 0x30) },	/* MeiG SRM813Q (Diag) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d63, 0xff, 0xff, 0x40) },	/* MeiG SRM813Q (AT) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d64, 0xff, 0xff, 0x30) },	/* MeiG SRM813Q (Diag) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d64, 0xff, 0xff, 0x40) },	/* MeiG SRM813Q (AT) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d64, 0xff, 0xff, 0x60) },	/* MeiG SRM813Q (NMEA) */
+
 	{ USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) },			/* LongSung M5710 */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) },			/* GosunCn GM500 RNDIS */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) },			/* GosunCn GM500 MBIM */
-- 
2.43.0

Re: [PATCH] USB: serial: option: NET: usb: qmi_wwan: add MeiG SRM813Q

From: Johan Hovold <johan@kernel.org>
Date: 2026-05-08 13:37:18

On Fri, May 08, 2026 at 03:31:59PM +0200, Jan Volckaert wrote:
Add support for the Qualcomm Technology Snapdragon X35-based MeiG SRM813Q module.
Signed-off-by: Jan Volckaert <redacted>
---
 drivers/net/usb/qmi_wwan.c  | 2 ++
 drivers/usb/serial/option.c | 6 ++++++
 2 files changed, 8 insertions(+)
Please split this in two patches as they will go in through different
trees.

Johan

[PATCH v2 0/2] USB: add MeiG SRM813Q IDs in qmi_wwan and option

From: Jan Volckaert <hidden>
Date: 2026-05-17 15:32:49

Add MeiG SRM813Q support by adding USB IDs to:
- qmi_wwan for the network interface
- option for serial interfaces

Split into two patches so each change goes through its respective
maintainer tree (net and usb-serial).

Jan Volckaert (2):
  NET: usb: qmi_wwan: add MeiG SRM813Q
  USB: serial: option: add MeiG SRM813Q

 drivers/net/usb/qmi_wwan.c  | 2 ++
 drivers/usb/serial/option.c | 6 ++++++
 2 files changed, 8 insertions(+)

---
v2:
- Thanks to Johan Hovold for the review and guidance.
- split original submission into two patches per maintainer request
- Link: https://lore.kernel.org/all/af3nDLa1A1JcTftq@hovoldconsulting.com/#r


base-commit: 917719c412c48687d4a176965d1fa35320ec457c
-- 
2.43.0

[PATCH v2 1/2] NET: usb: qmi_wwan: add MeiG SRM813Q

From: Jan Volckaert <hidden>
Date: 2026-05-17 15:32:52

Add support for the Qualcomm Technology Snapdragon X35-based MeiG SRM813Q module.

The module can be put in different modes via AT commands to enable/disable GPS functionality:

MODEM - PPP mode(2dee:4d63): AT+SER=1,1

If#= 0: RMNET
If#= 1: DIAG/ADB
If#= 2: MODEM
If#= 3: AT

P:  Vendor=2dee ProdID=4d63 Rev=05.15
S:  Manufacturer=MEIG
S:  Product=LTE-A Module
S:  SerialNumber=1bd51f0e
C:  #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms

NMEA mode(2dee:4d64): AT+SER=51,1

If#= 0: RMNET
If#= 1: DIAG/ADB
If#= 2: NMEA
If#= 3: AT

P:  Vendor=2dee ProdID=4d64 Rev=05.15
S:  Manufacturer=MEIG
S:  Product=LTE-A Module
S:  SerialNumber=1bd51f0e
C:  #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms

Signed-off-by: Jan Volckaert <redacted>
---
 drivers/net/usb/qmi_wwan.c | 2 ++
 1 file changed, 2 insertions(+)
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 05acac10cd2b..94cdb61dca83 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1452,6 +1452,8 @@ static const struct usb_device_id products[] = {
 	{QMI_QUIRK_SET_DTR(0x1546, 0x1342, 4)},	/* u-blox LARA-L6 */
 	{QMI_QUIRK_SET_DTR(0x33f8, 0x0104, 4)}, /* Rolling RW101 RMNET */
 	{QMI_FIXED_INTF(0x2dee, 0x4d22, 5)},    /* MeiG Smart SRM825L */
+	{QMI_QUIRK_SET_DTR(0x2dee, 0x4d63, 0)}, /* MeiG SRM813Q w/ Modem(PPP) */
+	{QMI_QUIRK_SET_DTR(0x2dee, 0x4d64, 0)}, /* MeiG SRM813Q w/ NMEA */
 
 	/* 4. Gobi 1000 devices */
 	{QMI_GOBI1K_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
-- 
2.43.0

[PATCH v2 2/2] USB: serial: option: add MeiG SRM813Q

From: Jan Volckaert <hidden>
Date: 2026-05-17 15:32:54

Add support for the Qualcomm Technology Snapdragon X35-based MeiG SRM813Q module.

The module can be put in different modes via AT commands to enable/disable GPS functionality:

MODEM - PPP mode(2dee:4d63): AT+SER=1,1

If#= 0: RMNET
If#= 1: DIAG/ADB
If#= 2: MODEM
If#= 3: AT

P:  Vendor=2dee ProdID=4d63 Rev=05.15
S:  Manufacturer=MEIG
S:  Product=LTE-A Module
S:  SerialNumber=1bd51f0e
C:  #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms

NMEA mode(2dee:4d64): AT+SER=51,1

If#= 0: RMNET
If#= 1: DIAG/ADB
If#= 2: NMEA
If#= 3: AT

P:  Vendor=2dee ProdID=4d64 Rev=05.15
S:  Manufacturer=MEIG
S:  Product=LTE-A Module
S:  SerialNumber=1bd51f0e
C:  #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms

Signed-off-by: Jan Volckaert <redacted>
---
 drivers/usb/serial/option.c | 6 ++++++
 1 file changed, 6 insertions(+)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index c71461893d20..e3827b1e4f27 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2446,6 +2446,12 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d38, 0xff, 0xff, 0x30) },	/* MeiG Smart SRM825WN (Diag) */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d38, 0xff, 0xff, 0x40) },	/* MeiG Smart SRM825WN (AT) */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d38, 0xff, 0xff, 0x60) },	/* MeiG Smart SRM825WN (NMEA) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d63, 0xff, 0xff, 0x30) },	/* MeiG SRM813Q (Diag) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d63, 0xff, 0xff, 0x40) },	/* MeiG SRM813Q (AT) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d64, 0xff, 0xff, 0x30) },	/* MeiG SRM813Q (Diag) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d64, 0xff, 0xff, 0x40) },	/* MeiG SRM813Q (AT) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d64, 0xff, 0xff, 0x60) },	/* MeiG SRM813Q (NMEA) */
+
 	{ USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) },			/* LongSung M5710 */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) },			/* GosunCn GM500 RNDIS */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) },			/* GosunCn GM500 MBIM */
-- 
2.43.0

Re: [PATCH v2 0/2] USB: add MeiG SRM813Q IDs in qmi_wwan and option

From: patchwork-bot+netdevbpf@kernel.org
Date: 2026-05-21 00:00:14

Hello:

This series was applied to netdev/net-next.git (main)
by Jakub Kicinski [off-list ref]:

On Sun, 17 May 2026 17:32:35 +0200 you wrote:
Add MeiG SRM813Q support by adding USB IDs to:
- qmi_wwan for the network interface
- option for serial interfaces

Split into two patches so each change goes through its respective
maintainer tree (net and usb-serial).

[...]
Here is the summary with links:
  - [v2,1/2] NET: usb: qmi_wwan: add MeiG SRM813Q
    https://git.kernel.org/netdev/net-next/c/9758c11fc6c1
  - [v2,2/2] USB: serial: option: add MeiG SRM813Q
    (no matching commit)

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

Re: [PATCH v2 2/2] USB: serial: option: add MeiG SRM813Q

From: Johan Hovold <johan@kernel.org>
Date: 2026-05-21 07:57:34

On Sun, May 17, 2026 at 05:32:37PM +0200, Jan Volckaert wrote:
Add support for the Qualcomm Technology Snapdragon X35-based MeiG SRM813Q module.

The module can be put in different modes via AT commands to enable/disable GPS functionality:
In the future, remember to wrap the commit messages at 72 columns or so.
Signed-off-by: Jan Volckaert <redacted>
Now applied, thanks.

Johan
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help