# Re: \[PATCH net-next v3 2/2\] net: phy: add Rust reference driver for ET1011C

- From: Принтер Принтеров \<hidden\>
- Date: 2026-02-24 18:09:47 
- List: netdev
- Page: https://ratatoskr.run/netdev/2026/02/3425455
- Thread: https://ratatoskr.run/netdev/2026/02/3423636/t.md

```text
 Thank you, Miguel! I appreciate the encouragement and the pointers.

  I'll look into the Nova and Panfrost/Tyr task lists, and check the
  Zulip threads for open work. The suggestion about unsupported hardware
  is a good one -- I'll look for something that could use a new Rust
  driver.

  I'll also start reviewing patches in the areas I'm interested in.
  That seems like a good way to learn and contribute at the same time.

  Thanks again for taking the time to reply.

  Artem

вт, 24 февр. 2026 г. в 20:54, Miguel Ojeda [ref]:
>
> On Tue, Feb 24, 2026 at 6:04 PM Принтер Принтеров
> [ref] wrote:
> >
> > Thank you for the feedback, Miguel. You raise a fair point.
> >
> >   Honestly, the new abstraction here (speed() getter) is quite minor --
> >   it just reads a struct field. The driver itself doesn't bootstrap
> >   anything significant beyond what ax88796b_rust already covers.
> >
> >   I'm looking to contribute to Rust in the kernel and started with PHY
> >   drivers because the abstraction is well established. But I understand
> >   now that duplicating C drivers isn't the goal.
> >
> >   Could you point me toward areas where Rust work would be most
> >   valuable? I'm happy to work on new abstractions or drivers that
> >   actually need bootstrapping, rather than adding another reference
> >   driver to an area that's already covered.
>
> To clarify, if the netdev maintainers want to have more reference
> drivers, it is up to them, i.e. please do not feel discouraged by what
> I said. :) I just thought I should mention it in case there was some
> confusion.
>
> Regarding new drivers, if you want to work around networking, then
> probably the maintainers can tell you what is needed. In general, I
> would suggest looking for hardware that is unsupported currently --
> that is usually way easier to justify and land, and there is no
> concern about duplication (and possibly arch support is not a worry
> too, since there is no other driver anyway).
>
> Regarding new abstractions or other kinds of work, you may want to
> look into existing driver's lists like:
>
>   - https://docs.kernel.org/next/gpu/nova/core/todo.html
>   - https://gitlab.freedesktop.org/panfrost/linux/-/issues/?label_name%5B%5D=tyr
>
> We have also threads in Zulip about looking for things to work on --
> in case you haven't seen them, you may want to take a look at e.g.
>
>   https://rust-for-linux.zulipchat.com/#narrow/channel/291565-Help/topic/Looking.20for.20open.20issue
>
> Finally, you probably know this, but you can always help not just by
> writing code, but by reviewing patches and testing them -- that is
> very needed, gets you credit in the Git log, and by doing so you will
> likely realize what other things you could work on around the same
> areas you start to review.
>
> I hope that helps!
>
> Cheers,
> Miguel
```
