# Re: \[PATCH 1/5\] dt-bindings: net: macb: Add SiFive FU740-C000 support

- From: Max Hsu \<hidden\>
- Date: 2026-02-20 18:42:14 
- List: netdev
- Page: https://ratatoskr.run/netdev/2026/02/3420702
- Thread: https://ratatoskr.run/netdev/2026/02/3420043/t.md

```text
On Fri, Feb 20, 2026 at 09:29:28 +0000, Conor Dooley wrote:
> I don't think this is right, since it is identical to the one on the
> fu540 (as evidenced by how it has worked until now and the contents of
> your driver change). I think you should add the fu740 with a fallback to
> the fu540, like the devices from Microchip that fall back to the
> microchip,sama7g5-gem. The rest of the changes to the driver and binding
> can then be dropped as they'll be redundant.

Thanks for the feedback, Conor!
I'm taking your suggestions. and will prepare v2.

Thanks,
Max

On Fri, Feb 20, 2026 at 5:29 PM Conor Dooley [ref] wrote:
>
> On Fri, Feb 20, 2026 at 04:27:05PM +0800, Max Hsu wrote:
> > Add the SiFive FU740-C000 ethernet controller compatible string to the
> > Cadence MACB binding documentation.
> >
> > The FU740 ethernet controller uses the same GEMGXL management block as
> > the FU540, which is tightly coupled with the Cadence MACB IP. This
> > follows the SiFive IP versioning scheme which requires SoC-specific
> > compatible strings for proper hardware identification.
>
> Your rationale for this change is misguided, as this is not a SiFive IP,
> so that document does not apply. On the other hand, the general rules
> for devicetrees require this so this just means a change in the
> rationale provided.
>
> >
> > Signed-off-by: Max Hsu <redacted>
> > ---
> >  Documentation/devicetree/bindings/net/cdns,macb.yaml | 7 +++++--
> >  1 file changed, 5 insertions(+), 2 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/net/cdns,macb.yaml b/Documentation/devicetree/bindings/net/cdns,macb.yaml
> > index cb14c35ba996..b46dde1da170 100644
> > --- a/Documentation/devicetree/bindings/net/cdns,macb.yaml
> > +++ b/Documentation/devicetree/bindings/net/cdns,macb.yaml
> > @@ -63,6 +63,7 @@ properties:
> >            - mobileye,eyeq5-gem        # Mobileye EyeQ5 SoCs
> >            - raspberrypi,rp1-gem       # Raspberry Pi RP1 gigabit ethernet interface
> >            - sifive,fu540-c000-gem     # SiFive FU540-C000 SoC
> > +          - sifive,fu740-c000-gem     # SiFive FU740-C000 SoC
>
> I don't think this is right, since it is identical to the one on the
> fu540 (as evidenced by how it has worked until now and the contents of
> your driver change). I think you should add the fu740 with a fallback to
> the fu540, like the devices from Microchip that fall back to the
> microchip,sama7g5-gem. The rest of the changes to the driver and binding
> can then be dropped as they'll be redundant.
>
> Thanks,
> Conor.
>
> pw-bot: changes-requested
>
> >
> >        - items:
> >            - enum:
> > @@ -74,7 +75,7 @@ properties:
> >      minItems: 1
> >      items:
> >        - description: Basic register set
> > -      - description: GEMGXL Management block registers on SiFive FU540-C000 SoC
> > +      - description: GEMGXL Management block registers on SiFive FU540/FU740 SoCs
> >
> >    interrupts:
> >      minItems: 1
> > @@ -181,7 +182,9 @@ allOf:
> >          properties:
> >            compatible:
> >              contains:
> > -              const: sifive,fu540-c000-gem
> > +              enum:
> > +                - sifive,fu540-c000-gem
> > +                - sifive,fu740-c000-gem
> >      then:
> >        properties:
> >          reg:
> >
> > --
> > 2.43.0
> >
```
