From: Carl Lee <redacted>

For NXP NCI devices (e.g. PN7150), the interrupt is level-triggered and
active high, not edge-triggered.

Using IRQF_TRIGGER_RISING in the driver can cause interrupts to fail
to trigger correctly.

Remove IRQF_TRIGGER_RISING and rely on the IRQ trigger type configured
via Device Tree.

Signed-off-by: Carl Lee <redacted>
---
 drivers/nfc/nxp-nci/i2c.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/nfc/nxp-nci/i2c.c b/drivers/nfc/nxp-nci/i2c.c
index 049662ffdf97..6a5ce8ff91f0 100644
--- a/drivers/nfc/nxp-nci/i2c.c
+++ b/drivers/nfc/nxp-nci/i2c.c

@@ -305,7 +305,7 @@ static int nxp_nci_i2c_probe(struct i2c_client *client)
 
 	r = request_threaded_irq(client->irq, NULL,
 				 nxp_nci_i2c_irq_thread_fn,
-				 IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+				 IRQF_ONESHOT,
 				 NXP_NCI_I2C_DRIVER_NAME, phy);
 	if (r < 0)
 		nfc_err(&client->dev, "Unable to register IRQ handler\n");

---
base-commit: 4c87cdd0328495759f6e9f9f4e1e53ef8032a76f
change-id: 20260204-fc-nxp-nci-remove-interrupt-trigger-type-d778323b3b81

Best regards,
-- 
Carl Lee [off-list ref]