# Re: \[PATCH net-next v5 2/5\] net: spacemit: Add K1 Ethernet MAC

- From: Vivian Wang \<hidden\>
- Date: 2025-08-12 10:58:39 
- List: netdev
- Page: https://ratatoskr.run/netdev/2025/08/3166332
- Thread: https://ratatoskr.run/netdev/2025/08/3165567/t.md

```text
On 8/12/25 11:45, Andrew Lunn wrote:

>> +static void emac_get_pause_stats(struct net_device *dev,
>> +				 struct ethtool_pause_stats *pause_stats)
>> +{
>> +	struct emac_priv *priv = netdev_priv(dev);
>> +	struct emac_hw_tx_stats *tx_stats;
>> +	struct emac_hw_rx_stats *rx_stats;
>> +
>> +	tx_stats = &priv->tx_stats;
>> +	rx_stats = &priv->rx_stats;
>> +
>> +	scoped_guard(spinlock_irqsave, &priv->stats_lock) {
>> +		emac_stats_update(priv);
>> +
>> +		pause_stats->tx_pause_frames = tx_stats->tx_pause_pkts;
>> +		pause_stats->rx_pause_frames = rx_stats->rx_pause_pkts;
>> +	}
>> +}
> You have pause statistics, but not actual configuration of pause.
>
>> +static void emac_adjust_link(struct net_device *dev)
>> +{
>> +	struct emac_priv *priv = netdev_priv(dev);
>> +	struct phy_device *phydev = dev->phydev;
>> +	u32 ctrl;
> Normally the adjust_link callback you configure the hardware with the
> result of pause negotiation.

Thanks for the tip, I will fix emac_adjust_link next version.

>> +/* Called when net interface is brought up. */
>> +static int emac_open(struct net_device *ndev)
>> +{
>> +	struct emac_priv *priv = netdev_priv(ndev);
>> +	struct device *dev = &priv->pdev->dev;
>> +
>> +	int ret;
> Extra blank line.

Oops. I will fix next version.

Thanks,
Vivian "dramforever" Wang

>
>     Andrew
>
> ---
> pw-bot: cr

```
