The SAMA5D27 WLSOM1 plaftorm embeds a wilc3000 chip exposing 802.11b/g/n
and bluetooth 5. The current description for this chip does not expose
the bluetooth part: it only configures the relevant flexcom peripheral
to set it as uart, and relies on user to trigger the corresponding hci
device creation in kernel through hci_attach. Now that a bluetooth
driver is available and handles the device creation, replace the bare
uart description with a proper bluetooth node.

Signed-off-by: Alexis Lothoré <redacted>
---
 arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi   |  8 ++++++++
 arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts | 10 ----------
 2 files changed, 8 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi
index ef11606a82b31c2f745141cdac1318805f473273..10d48a9ef92c9621a8885feebda6119d3f61af75 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1.dtsi

@@ -50,10 +50,18 @@ wifi_pwrseq: wifi_pwrseq {
 
 &flx1 {
 	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
 
 	uart6: serial@200 {
 		pinctrl-0 = <&pinctrl_flx1_default>;
 		pinctrl-names = "default";
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "okay";
+		bluetooth: bluetooth@0 {
+			compatible = "microchip,wilc3000-bt";
+			wlan = <&wilc>;
+		};
 	};
 };
 

diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
index 15239834d886edbf9e732ac461a92ac9eea42ae5..8b89ee0b47ccb6e60b67f3e4db6caa827ce9c0bc 100644
--- a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts

@@ -85,16 +85,6 @@ uart5: serial@200 {
 	};
 };
 
-&flx1 {
-	status = "okay";
-
-	uart6: serial@200 {
-		atmel,use-dma-rx;
-		atmel,use-dma-tx;
-		status = "okay";
-	};
-};
-
 &macb0 {
 	status = "okay";
 };

-- 
2.48.0