# Re: \[PATCH net v2 1/2\] gso: Skip bad offload detection when device supports requested GSO

- From: Jakub Sitnicki \<jakub@cloudflare.com\>
- Date: 2024-08-05 15:59:27 
- List: netdev
- Page: https://ratatoskr.run/netdev/2024/08/11302171
- Thread: https://ratatoskr.run/netdev/2024/08/11301777/t.md

```text
On Mon, Aug 05, 2024 at 10:25 AM -04, Willem de Bruijn wrote:
> Jakub Sitnicki wrote:
>> On Thu, Aug 01, 2024 at 03:13 PM -04, Willem de Bruijn wrote:

[...]

>> > It's a bit odd, in that the ip_summed == CHECKSUM_NONE ends up just
>> > being ignored and devices are trusted to always be able to checksum
>> > offload when they can segment offload -- even when the device does not
>> > advertise checksum offload.
>> >
>> > I think we should have a follow-on that makes advertising
>> > NETIF_F_GSO_UDP_L4 dependent on having at least one of the
>> > NETIF_F_*_CSUM bits set (handwaving over what happens when only
>> > advertising NETIF_F_IP_CSUM or NETIF_F_IPV6_CSUM).
>> 
>> I agree. I've also gained some clarity as to how the fix should
>> look. Let's circle back to it, if we still think it's relevant once we
>> hash out the fix.
>> 
>> After spending some quality time debugging the addded regression test
>> [1], I've realized this fix is wrong.
>> 
>> You see, with commit 10154dbded6d ("udp: Allow GSO transmit from devices
>> with no checksum offload"), I've opened up the UDP_SEGMENT API to two
>> uses, which I think should not be allowed:
>> 
>> 1. Hardware USO for IPv6 dgrams with extension headers
>> 
>> Previously that led to -EIO, because __ip6_append_data won't annotate
>> such packets as CHECKSUM_PARTIAL.
>> 
>> I'm guessing that we do this because some drivers that advertise csum
>> offload can't actually handle checksumming when extension headers are
>> present.
>> 
>> Extension headers are not part of IPv6 pseudo header, but who knows what
>> limitations NIC firmwares have.
>> 
>> Either way, changing it just like that sounds risky, so I think we need
>> to fall back to software USO with software checksum in this case.
>> 
>> Alternatively, we could catch it in the udp layer and error out with EIO
>> as ealier. But that shifts some burden onto the user space (detect and
>> segment before sendmsg()).
>> 
>> 2. Hardware USO when hardware csum is unsupported / disabled
>> 
>> That sounds like a pathological device configuration case, but since it
>> is possible today with some drivers to disable csum offload for one IP
>> version and not the other, it seems safest to just handle that
>> gracefully.
>> 
>> I don't know why one might want to do that. Perhaps as a workaround for
>> some firmware bug while waiting for a fix?
>
> I doubt that this is actually used. But today it can be configured.
>
> Which is why I suggested making NETIF_F_GSO_UDP_L4 dependent on csum
> offload (in netdev_fix_features). I doubt that that will break any
> real user.

Sounds like a plan. If we're talking about simply disabling GSO_UDP_L4
whenever either NETIF_F_IP_CSUM or NETIF_F_IPV6_CSUM is "off", then that
is straightforward. And the NETIF_F_HW_CSUM dependency is clear.

I could even piggy back it on this series, at the risk of additional
iterations.

>  
>> In this scenario I think we also need to fall back to software USO and
>> checksum.
>> 
>> Code-wise that could look like below. WDYT?
>
> Since this only affects USO, can we fix this is in __udp_gso_segment.
> Basically, not taking the NETIF_F_GSO_ROBUST path.
>
> skb_segment is so complicated already. Whatever we can do to avoid
> adding to that.

skb_segment is a complex beast. No disagreement there.

Keeping the changes down seems doable. We can drive skb_segment to
compute the checksum, when we know that's needed (because IPv6 extension
headers are present -> ip_summed is CHECKSUM_NONE) by masking off csum
flags. Thanks for the suggestion.

[...]
```
