Thread (11 messages) 11 messages, 4 authors, 2024-03-25
STALE806d
Revisions (32)
  1. v1 [diff vs current]
  2. v1 [diff vs current]
  3. v2 [diff vs current]
  4. v1 [diff vs current]
  5. v1 [diff vs current]
  6. v2 [diff vs current]
  7. v1 [diff vs current]
  8. v2 [diff vs current]
  9. v1 [diff vs current]
  10. v1 [diff vs current]
  11. v2 [diff vs current]
  12. v3 current
  13. v4 [diff vs current]
  14. v1 [diff vs current]
  15. v2 [diff vs current]
  16. v3 [diff vs current]
  17. v1 [diff vs current]
  18. v1 [diff vs current]
  19. v2 [diff vs current]
  20. v3 [diff vs current]
  21. resend [diff vs current]
  22. v2 [diff vs current]
  23. v2 [diff vs current]
  24. v3 [diff vs current]
  25. v1 [diff vs current]
  26. v1 [diff vs current]
  27. v1 [diff vs current]
  28. v1 [diff vs current]
  29. v2 [diff vs current]
  30. v1 [diff vs current]
  31. v1 [diff vs current]
  32. v2 [diff vs current]

[PATCH V3 net 3/3] net: hns3: mark unexcuted loopback test result as UNEXECUTED

From: Jijie Shao <shaojijie@huawei.com>
Date: 2024-03-18 13:34:56
Also in: lkml
Subsystem: hisilicon network subsystem 3 driver (hns3), hisilicon network subsystem driver, networking drivers, the rest · Maintainers: Jian Shen, Jijie Shao, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds

From: Jian Shen <shenjian15@huawei.com>

Currently, loopback test may be skipped when resetting, but the test
result will still show as 'PASS', because the driver doesn't set
ETH_TEST_FL_FAILED flag. Fix it by setting the flag and
initializating the value to UNEXECUTED.

Fixes: 4c8dab1c709c ("net: hns3: reconstruct function hns3_self_test")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
---
 .../ethernet/hisilicon/hns3/hns3_ethtool.c    | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index 999a0ee162a6..941cb529d671 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -78,6 +78,9 @@ static const struct hns3_stats hns3_rxq_stats[] = {
 #define HNS3_NIC_LB_TEST_NO_MEM_ERR	1
 #define HNS3_NIC_LB_TEST_TX_CNT_ERR	2
 #define HNS3_NIC_LB_TEST_RX_CNT_ERR	3
+#define HNS3_NIC_LB_TEST_UNEXECUTED	4
+
+static int hns3_get_sset_count(struct net_device *netdev, int stringset);
 
 static int hns3_lp_setup(struct net_device *ndev, enum hnae3_loop loop, bool en)
 {
@@ -418,18 +421,26 @@ static void hns3_do_external_lb(struct net_device *ndev,
 static void hns3_self_test(struct net_device *ndev,
 			   struct ethtool_test *eth_test, u64 *data)
 {
+	int cnt = hns3_get_sset_count(ndev, ETH_SS_TEST);
 	struct hns3_nic_priv *priv = netdev_priv(ndev);
 	struct hnae3_handle *h = priv->ae_handle;
 	int st_param[HNAE3_LOOP_NONE][2];
 	bool if_running = netif_running(ndev);
+	int i;
+
+	/* initialize the loopback test result, avoid marking an unexcuted
+	 * loopback test as PASS.
+	 */
+	for (i = 0; i < cnt; i++)
+		data[i] = HNS3_NIC_LB_TEST_UNEXECUTED;
 
 	if (hns3_nic_resetting(ndev)) {
 		netdev_err(ndev, "dev resetting!");
-		return;
+		goto failure;
 	}
 
 	if (!(eth_test->flags & ETH_TEST_FL_OFFLINE))
-		return;
+		goto failure;
 
 	if (netif_msg_ifdown(h))
 		netdev_info(ndev, "self test start\n");
@@ -451,6 +462,10 @@ static void hns3_self_test(struct net_device *ndev,
 
 	if (netif_msg_ifdown(h))
 		netdev_info(ndev, "self test end\n");
+	return;
+
+failure:
+	eth_test->flags |= ETH_TEST_FL_FAILED;
 }
 
 static void hns3_update_limit_promisc_mode(struct net_device *netdev,
-- 
2.30.0
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help