# Re: \[net-next RFC PATCH 6/6\] net: phy: bcm7xxx: rework phy\_driver table to new multiple PHY ID format

- From: Florian Fainelli \<f.fainelli@gmail.com\>
- Date: 2024-02-19 20:15:21 
- List: netdev
- Page: https://ratatoskr.run/netdev/2024/02/2502289
- Thread: https://ratatoskr.run/netdev/2024/02/2500936/t.md

```text


On 2/19/2024 8:41 AM, Christian Marangi wrote:
> On Sun, Feb 18, 2024 at 08:26:29PM -0800, Florian Fainelli wrote:
>>
>>
>> On 2/18/2024 11:00 AM, Christian Marangi wrote:
>>> Rework bcm7xxx PHY driver table to new multiple PHY format
>>> implementation to reduce code duplication and final size of the compiled
>>> module.
>>
>> I like the idea of sharing as much code as possible and creating a smaller
>> module, however by changing the name, you are creating an user-space ABI
>> change, we rely upon the exact PHY name being shown under
>> /sys/class/mdio_bus/*/* and this change will break that.
>>
>
> Thanks for putting this concern on the table but isn't that generated by
> dev_set_name and PHY_ID_FMT? from bus->id and addr?
>
> Can't find reference of the name entry in sysfs. Am I missing something?
> The name seems to be used only by logging to print info/err/warn.

The name will appear under /sys/ like this:

ls -ls /sys/class/mdio_bus/unimac-mdio-0/unimac-mdio-0\:01/
total 0
     0 lrwxrwxrwx    1 root     root             0 Jan  4 21:27 attached_dev -> ../../../../net/eth0
     0 lrwxrwxrwx    1 root     root             0 Jan  4 21:27 driver -> ../../../../../../../../bus/mdio_bus/drivers/Broadcom BCM7712

it might be OK to change the driver, but I can tell you this is going to be breaking a number of our scripts here...
-- 
Florian
```
