# Re: \[net-next RFC PATCH 1/6\] net: phy: add support for defining multiple PHY IDs in PHY driver

- From: Andrew Lunn \<andrew@lunn.ch\>
- Date: 2024-02-18 22:07:18 
- List: netdev
- Page: https://ratatoskr.run/netdev/2024/02/2501012
- Thread: https://ratatoskr.run/netdev/2024/02/2500936/t.md

```text
> With the allocated mdio_devic_id it would result in this snipped
> 
> 	const struct mdio_device_id *driver_dev_id;
> 	struct mdio_device_id *dev_id;
> 	int err = 0;
> 
> 	phydev->drv = phydrv;
> 	/* Fill the mdio_device_id for the PHY istance.
> 	 * If PHY driver provide an array of PHYs, search the right one,
> 	 * in the other case fill it with the phy_driver data.
> 	 */
> 	if (phy_driver_match(phydrv, phydev, &driver_dev_id) && driver_dev_id) {
> 		/* If defined, overwrite the PHY driver dev name with a
> 		 * more specific one from the matching dev_id.
> 		 */
> 		phydev->dev_id = driver_dev_id;
> 		if (driver_dev_id->name)
> 			drv->name = driver_dev_id->name;

What is drv here? You should not be changing the name within the
driver structure, since that is shared by a number of devices.

       Andrew
```
