On 13.11.2023 14:25:37, Martin Hundebøll wrote:

On Fri, 2023-09-29 at 16:12 +0200, Markus Schneider-Pargmann wrote:

quoted

Hi Marc, Simon, Martin and everyone,

v6 is a rebase on v6.6. As there was a conflicting change merged for
v6.6 which introduced irq polling, I had to modify the patches that
touch the hrtimer.

@Simon: I removed a couple of your reviewed-by tags because of the
changes.

@Martin: as the functionality changed, I did not apply your Tested-by
tag as I may have introduced new bugs with the changes.

The series implements many small and bigger throughput improvements
and
adds rx/tx coalescing at the end.

Based on v6.6-rc2. Also available at
https://gitlab.baylibre.com/msp8/linux/-/tree/topic/mcan-optimization/v6.6?ref_type=heads

For the whole series:
Tested-by: Martin Hundebøll <redacted>

On which hardware? On an mmio mapped m_can or the tcan4x5x?

Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde          |
Embedded Linux                   | https://www.pengutronix.de |
Vertretung Nürnberg              | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-9   |