# Re: \[PATCH\] net: phy: at803x: Improve hibernation support on start up

- From: Marek Vasut \<marex@denx.de\>
- Date: 2023-08-10 00:49:59 
- List: netdev
- Page: https://ratatoskr.run/netdev/2023/08/11268889
- Thread: https://ratatoskr.run/netdev/2023/08/11268287/t.md

```text
On 8/10/23 00:06, Andrew Lunn wrote:
> On Wed, Aug 09, 2023 at 11:34:19PM +0200, Marek Vasut wrote:
>> On 8/9/23 15:40, Andrew Lunn wrote:
>>>>> Hm.. how about officially defining this PHY as the clock provider and disable
>>>>> PHY automatic hibernation as long as clock is acquired?
>>>>>
>>>> Sorry, I don't know much about the clock provider/consumer, but I think there
>>>> will be more changes if we use clock provider/consume mechanism.
>>>
>>> Less changes is not always best. What happens when a different PHY is
>>> used?
>>
>> Then the system wouldn't be affected by this AR803x specific behavior.
>
> Do you know it really is specific to the AR803x? Turning the clock off
> seams a reasonable thing to do when saving power, or when there is no
> link partner.

This hibernation behavior seem specific to this PHY, I haven't seen it on another PHY connected to the EQoS so far.
```
