[PATCH v2 6/6] net: phy: at803x: add qca8081 fifo reset on the link changed
From: Luo Jie <quic_luoj@quicinc.com>
Date: 2023-07-14 06:32:51
Also in:
lkml
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
The qca8081 sgmii fifo needs to be reset on link down and released on the link up in case of any abnormal issue such as the packet blocked on the PHY. Signed-off-by: Luo Jie <quic_luoj@quicinc.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> --- drivers/net/phy/at803x.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 5e9d2a4d8bbc..97fb26e0ac9e 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c@@ -276,6 +276,9 @@ #define QCA808X_PHY_MMD7_CHIP_TYPE 0x901d #define QCA808X_PHY_CHIP_TYPE_1G BIT(0) +#define QCA8081_PHY_SERDES_MMD1_FIFO_CTRL 0x9072 +#define QCA8081_PHY_FIFO_RSTN BIT(11) + MODULE_DESCRIPTION("Qualcomm Atheros AR803x and QCA808X PHY driver"); MODULE_AUTHOR("Matus Ujhelyi"); MODULE_LICENSE("GPL");
@@ -2027,6 +2030,16 @@ static int qca808x_get_features(struct phy_device *phydev) return 0; } +static void qca808x_link_change_notify(struct phy_device *phydev) +{ + /* Assert interface sgmii fifo on link down, deassert it on link up, + * the interface device address is always phy address added by 1. + */ + mdiobus_c45_modify_changed(phydev->mdio.bus, phydev->mdio.addr + 1, + MDIO_MMD_PMAPMD, QCA8081_PHY_SERDES_MMD1_FIFO_CTRL, + QCA8081_PHY_FIFO_RSTN, phydev->link ? QCA8081_PHY_FIFO_RSTN : 0); +} + static struct phy_driver at803x_driver[] = { { /* Qualcomm Atheros AR8035 */
@@ -2205,6 +2218,7 @@ static struct phy_driver at803x_driver[] = { .soft_reset = qca808x_soft_reset, .cable_test_start = qca808x_cable_test_start, .cable_test_get_status = qca808x_cable_test_get_status, + .link_change_notify = qca808x_link_change_notify, }, }; module_phy_driver(at803x_driver);
--
2.17.1