# Re: \[PATCH v10 2/3\] dt-bindings: net: bluetooth: Add NXP bluetooth support

- From: Paul Menzel \<hidden\>
- Date: 2023-03-14 13:45:52 
- List: netdev
- Page: https://ratatoskr.run/netdev/2023/03/2133263
- Thread: https://ratatoskr.run/netdev/2023/03/2131354/t.md

```text
Dear Neeraj,


Thank you for your patch.

Am 13.03.23 um 15:40 schrieb Neeraj Sanjay Kale:
> Add binding document for NXP bluetooth chipsets attached over UART.
>
> Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
> Reviewed-by: Krzysztof Kozlowski <redacted>
> ---
> v2: Resolved dt_binding_check errors. (Rob Herring)
> v2: Modified description, added specific compatibility devices, corrected
> indentations. (Krzysztof Kozlowski)
> v3: Modified description, renamed file (Krzysztof Kozlowski)
> v4: Resolved dt_binding_check errors, corrected indentation.
> (Rob Herring, Krzysztof Kozlowski)
> v5: Corrected serial device name in example. (Krzysztof Kozlowski)
> ---
>   .../net/bluetooth/nxp,88w8987-bt.yaml         | 46 +++++++++++++++++++
>   MAINTAINERS                                   |  6 +++
>   2 files changed, 52 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
>
> diff --git a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
> new file mode 100644
> index 000000000000..b913ca59b489
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
> @@ -0,0 +1,46 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/bluetooth/nxp,88w8987-bt.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP Bluetooth chips
> +
> +description:
> +  This binding describes UART-attached NXP bluetooth chips.
> +  These chips are dual-radio chips supporting WiFi and Bluetooth.
> +  The bluetooth works on standard H4 protocol over 4-wire UART.
> +  The RTS and CTS lines are used during FW download.
> +  To enable power save mode, the host asserts break signal
> +  over UART-TX line to put the chip into power save state.
> +  De-asserting break wakes-up the BT chip.

The verb is spelled with a space: wakes up the BT chip.

You seem to break the line whenever a sentence ends. Is that intentional?

> +
> +maintainers:
> +  - Neeraj Sanjay Kale [ref]
> +
> +properties:
> +  compatible:
> +    enum:
> +      - nxp,88w8987-bt
> +      - nxp,88w8997-bt
> +
> +  fw-init-baudrate:
> +    description:
> +      Chip baudrate after FW is downloaded and initialized.
> +      This property depends on the module vendor's
> +      configuration. If this property is not specified,
> +      115200 is set as default.
> +
> +required:
> +  - compatible
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    serial {
> +        bluetooth {
> +            compatible = "nxp,88w8987-bt";
> +            fw-init-baudrate = <3000000>;
> +        };
> +    };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 32dd41574930..030ec6fe89df 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -22835,6 +22835,12 @@ L:	linux-mm@kvack.org
>   S:	Maintained
>   F:	mm/zswap.c
>   
> +NXP BLUETOOTH WIRELESS DRIVERS
> +M:	Amitkumar Karwar [ref]
> +M:	Neeraj Kale [ref]
> +S:	Maintained
> +F:	Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
> +
>   THE REST
>   M:	Linus Torvalds [ref]
>   L:	linux-kernel@vger.kernel.org
```
