# Re: \[PATCH v5\] Bluetooth: NXP: Add protocol support for NXP Bluetooth chipsets

- From: Neeraj sanjay kale \<neeraj.sanjaykale@nxp.com\>
- Date: 2023-02-23 13:58:23 
- List: netdev
- Page: https://ratatoskr.run/netdev/2023/02/2111262
- Thread: https://ratatoskr.run/netdev/2023/02/2111043/t.md

```text
Hi Greg,

Thank you for your feedback.

> 
> > +
> > +static int init_baudrate = 115200;
> 
> and neither will this, as you need to support multiple devices in the system,
> your driver should never be only able to work with one device.
> Please make these device-specific things, not the same for the whole driver.
> 

I am using this init_baudrate as a module parameter
static int init_baudrate = 115200;
module_param(init_baudrate, int, 0444);
MODULE_PARM_DESC(init_baudrate, "host baudrate after FW download: default=115200");

We need this parameter configurable since different chip module vendors using the same NXP chipset, configure these chips differently.
For example, module vendor A distributes his modules based on NXP 88w8987 chips with a different configuration compared to module vendor B (based on NXP 88w8987), and the init_baudrate is one of the important distinctions between them.
If we are able to keep this init_baudrate configurable, while compiling btnxpuart.ko as module, we will be able to support such baudrate variations.
Please let me know your thoughts on this.

Thanks,
Neeraj
```
