[PATCH] intel/igb:fix repeated words in comments
From: Jilin Yuan <hidden>
Date: 2022-06-29 14:17:48
Also in:
intel-wired-lan, lkml
Subsystem:
intel ethernet drivers, networking drivers, the rest · Maintainers:
Tony Nguyen, Przemek Kitszel, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Delete the redundant word 'the'. Delete the redundant word 'frames'. Delete the redundant word 'set'. Delete the redundant word 'slot'. Signed-off-by: Jilin Yuan <redacted> --- drivers/net/ethernet/intel/igb/e1000_82575.c | 2 +- drivers/net/ethernet/intel/igb/e1000_mac.c | 2 +- drivers/net/ethernet/intel/igb/igb_main.c | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index cbe92fd23a70..8d6e44ee1895 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c@@ -2207,7 +2207,7 @@ s32 igb_write_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 data) * igb_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits * @hw: pointer to the HW structure * - * This resets the the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on + * This resets the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on * the values found in the EEPROM. This addresses an issue in which these * bits are not restored from EEPROM after reset. **/
diff --git a/drivers/net/ethernet/intel/igb/e1000_mac.c b/drivers/net/ethernet/intel/igb/e1000_mac.c
index 1277c5c7d099..205d577bdbba 100644
--- a/drivers/net/ethernet/intel/igb/e1000_mac.c
+++ b/drivers/net/ethernet/intel/igb/e1000_mac.c@@ -854,7 +854,7 @@ s32 igb_force_mac_fc(struct e1000_hw *hw) * 1: Rx flow control is enabled (we can receive pause * frames but not send pause frames). * 2: Tx flow control is enabled (we can send pause frames - * frames but we do not receive pause frames). + * but we do not receive pause frames). * 3: Both Rx and TX flow control (symmetric) is enabled. * other: No other values should be possible at this point. */
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 68be2976f539..85e8de511d35 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c@@ -1945,7 +1945,7 @@ static void igb_setup_tx_mode(struct igb_adapter *adapter) * However, when we do so, no frame from queue 2 and 3 are * transmitted. It seems the MAX_TPKT_SIZE should not be great * or _equal_ to the buffer size programmed in TXPBS. For this - * reason, we set set MAX_ TPKT_SIZE to (4kB - 1) / 64. + * reason, we set MAX_ TPKT_SIZE to (4kB - 1) / 64. */ val = (4096 - 1) / 64; wr32(E1000_I210_DTXMXPKTSZ, val);
@@ -9519,7 +9519,7 @@ static pci_ers_result_t igb_io_error_detected(struct pci_dev *pdev, igb_down(adapter); pci_disable_device(pdev); - /* Request a slot slot reset. */ + /* Request a slot reset. */ return PCI_ERS_RESULT_NEED_RESET; }
--
2.36.1