[BUG/PATCH v3] net: mvpp2: always set port pcs ops

Subsystems: marvell mvpp2 ethernet driver, networking drivers, the rest

8 messages, 3 authors, 2022-02-19 · open the first message on its own page

[BUG/PATCH v3] net: mvpp2: always set port pcs ops

From: Jeremy Linton <hidden>
Date: 2022-02-14 23:18:59

Booting a MACCHIATObin with 5.17, the system OOPs with
a null pointer deref when the network is started. This
is caused by the pcs->ops structure being null in
mcpp2_acpi_start() when it tries to call pcs_config().

Hoisting the code which sets pcs_gmac.ops and pcs_xlg.ops,
assuring they are always set, fixes the problem.

The OOPs looks like:
[   18.687760] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000010
[   18.698561] Mem abort info:
[   18.698564]   ESR = 0x96000004
[   18.698567]   EC = 0x25: DABT (current EL), IL = 32 bits
[   18.709821]   SET = 0, FnV = 0
[   18.714292]   EA = 0, S1PTW = 0
[   18.718833]   FSC = 0x04: level 0 translation fault
[   18.725126] Data abort info:
[   18.729408]   ISV = 0, ISS = 0x00000004
[   18.734655]   CM = 0, WnR = 0
[   18.738933] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000111bbf000
[   18.745409] [0000000000000010] pgd=0000000000000000, p4d=0000000000000000
[   18.752235] Internal error: Oops: 96000004 [#1] SMP
[   18.757134] Modules linked in: rfkill ip_set nf_tables nfnetlink qrtr sunrpc vfat fat omap_rng fuse zram xfs crct10dif_ce mvpp2 ghash_ce sbsa_gwdt phylink xhci_plat_hcd ahci_plam
[   18.773481] CPU: 0 PID: 681 Comm: NetworkManager Not tainted 5.17.0-0.rc3.89.fc36.aarch64 #1
[   18.781954] Hardware name: Marvell                         Armada 7k/8k Family Board      /Armada 7k/8k Family Board      , BIOS EDK II Jun  4 2019
[   18.795222] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   18.802213] pc : mvpp2_start_dev+0x2b0/0x300 [mvpp2]
[   18.807208] lr : mvpp2_start_dev+0x298/0x300 [mvpp2]
[   18.812197] sp : ffff80000b4732c0
[   18.815522] x29: ffff80000b4732c0 x28: 0000000000000000 x27: ffffccab38ae57f8
[   18.822689] x26: ffff6eeb03065a10 x25: ffff80000b473a30 x24: ffff80000b4735b8
[   18.829855] x23: 0000000000000000 x22: 00000000000001e0 x21: ffff6eeb07b6ab68
[   18.837021] x20: ffff6eeb07b6ab30 x19: ffff6eeb07b6a9c0 x18: 0000000000000014
[   18.844187] x17: 00000000f6232bfe x16: ffffccab899b1dc0 x15: 000000006a30f9fa
[   18.851353] x14: 000000003b77bd50 x13: 000006dc896f0e8e x12: 001bbbfccfd0d3a2
[   18.858519] x11: 0000000000001528 x10: 0000000000001548 x9 : ffffccab38ad0fb0
[   18.865685] x8 : ffff80000b473330 x7 : 0000000000000000 x6 : 0000000000000000
[   18.872851] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff80000b4732f8
[   18.880017] x2 : 000000000000001a x1 : 0000000000000002 x0 : ffff6eeb07b6ab68
[   18.887183] Call trace:
[   18.889637]  mvpp2_start_dev+0x2b0/0x300 [mvpp2]
[   18.894279]  mvpp2_open+0x134/0x2b4 [mvpp2]
[   18.898483]  __dev_open+0x128/0x1e4
[   18.901988]  __dev_change_flags+0x17c/0x1d0
[   18.906187]  dev_change_flags+0x30/0x70
[   18.910038]  do_setlink+0x278/0xa7c
[   18.913540]  __rtnl_newlink+0x44c/0x7d0
[   18.917391]  rtnl_newlink+0x5c/0x8c
[   18.920892]  rtnetlink_rcv_msg+0x254/0x314
[   18.925006]  netlink_rcv_skb+0x48/0x10c
[   18.928858]  rtnetlink_rcv+0x24/0x30
[   18.932449]  netlink_unicast+0x290/0x2f4
[   18.936386]  netlink_sendmsg+0x1d0/0x41c
[   18.940323]  sock_sendmsg+0x60/0x70
[   18.943825]  ____sys_sendmsg+0x248/0x260
[   18.947762]  ___sys_sendmsg+0x74/0xa0
[   18.951438]  __sys_sendmsg+0x64/0xcc
[   18.955027]  __arm64_sys_sendmsg+0x30/0x40
[   18.959140]  invoke_syscall+0x50/0x120
[   18.962906]  el0_svc_common.constprop.0+0x4c/0xf4
[   18.967629]  do_el0_svc+0x30/0x9c
[   18.970958]  el0_svc+0x28/0xb0
[   18.974025]  el0t_64_sync_handler+0x10c/0x140
[   18.978400]  el0t_64_sync+0x1a4/0x1a8
[   18.982078] Code: 52800004 b9416262 aa1503e0 52800041 (f94008a5)
[   18.988196] ---[ end trace 0000000000000000 ]---

Fixes: cff056322372 ("net: mvpp2: use .mac_select_pcs() interface")
Suggested-by: Russell King (Oracle) <redacted>
Signed-off-by: Jeremy Linton <redacted>
---
v1->v2: Apply Russell's fix
v2->v3: Fix Russell's name

 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 7cdbf8b8bbf6..1a835b48791b 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -6870,6 +6870,9 @@ static int mvpp2_port_probe(struct platform_device *pdev,
 	dev->max_mtu = MVPP2_BM_JUMBO_PKT_SIZE;
 	dev->dev.of_node = port_node;
 
+	port->pcs_gmac.ops = &mvpp2_phylink_gmac_pcs_ops;
+	port->pcs_xlg.ops = &mvpp2_phylink_xlg_pcs_ops;
+
 	if (!mvpp2_use_acpi_compat_mode(port_fwnode)) {
 		port->phylink_config.dev = &dev->dev;
 		port->phylink_config.type = PHYLINK_NETDEV;
@@ -6940,9 +6943,6 @@ static int mvpp2_port_probe(struct platform_device *pdev,
 				  port->phylink_config.supported_interfaces);
 		}
 
-		port->pcs_gmac.ops = &mvpp2_phylink_gmac_pcs_ops;
-		port->pcs_xlg.ops = &mvpp2_phylink_xlg_pcs_ops;
-
 		phylink = phylink_create(&port->phylink_config, port_fwnode,
 					 phy_mode, &mvpp2_phylink_ops);
 		if (IS_ERR(phylink)) {
-- 
2.34.1

Re: [BUG/PATCH v3] net: mvpp2: always set port pcs ops

From: Marcin Wojtas <hidden>
Date: 2022-02-15 08:39:04

Hi Jeremy,


wt., 15 lut 2022 o 00:18 Jeremy Linton [off-list ref] napisał(a):
quoted hunk
Booting a MACCHIATObin with 5.17, the system OOPs with
a null pointer deref when the network is started. This
is caused by the pcs->ops structure being null in
mcpp2_acpi_start() when it tries to call pcs_config().

Hoisting the code which sets pcs_gmac.ops and pcs_xlg.ops,
assuring they are always set, fixes the problem.

The OOPs looks like:
[   18.687760] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000010
[   18.698561] Mem abort info:
[   18.698564]   ESR = 0x96000004
[   18.698567]   EC = 0x25: DABT (current EL), IL = 32 bits
[   18.709821]   SET = 0, FnV = 0
[   18.714292]   EA = 0, S1PTW = 0
[   18.718833]   FSC = 0x04: level 0 translation fault
[   18.725126] Data abort info:
[   18.729408]   ISV = 0, ISS = 0x00000004
[   18.734655]   CM = 0, WnR = 0
[   18.738933] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000111bbf000
[   18.745409] [0000000000000010] pgd=0000000000000000, p4d=0000000000000000
[   18.752235] Internal error: Oops: 96000004 [#1] SMP
[   18.757134] Modules linked in: rfkill ip_set nf_tables nfnetlink qrtr sunrpc vfat fat omap_rng fuse zram xfs crct10dif_ce mvpp2 ghash_ce sbsa_gwdt phylink xhci_plat_hcd ahci_plam
[   18.773481] CPU: 0 PID: 681 Comm: NetworkManager Not tainted 5.17.0-0.rc3.89.fc36.aarch64 #1
[   18.781954] Hardware name: Marvell                         Armada 7k/8k Family Board      /Armada 7k/8k Family Board      , BIOS EDK II Jun  4 2019
[   18.795222] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   18.802213] pc : mvpp2_start_dev+0x2b0/0x300 [mvpp2]
[   18.807208] lr : mvpp2_start_dev+0x298/0x300 [mvpp2]
[   18.812197] sp : ffff80000b4732c0
[   18.815522] x29: ffff80000b4732c0 x28: 0000000000000000 x27: ffffccab38ae57f8
[   18.822689] x26: ffff6eeb03065a10 x25: ffff80000b473a30 x24: ffff80000b4735b8
[   18.829855] x23: 0000000000000000 x22: 00000000000001e0 x21: ffff6eeb07b6ab68
[   18.837021] x20: ffff6eeb07b6ab30 x19: ffff6eeb07b6a9c0 x18: 0000000000000014
[   18.844187] x17: 00000000f6232bfe x16: ffffccab899b1dc0 x15: 000000006a30f9fa
[   18.851353] x14: 000000003b77bd50 x13: 000006dc896f0e8e x12: 001bbbfccfd0d3a2
[   18.858519] x11: 0000000000001528 x10: 0000000000001548 x9 : ffffccab38ad0fb0
[   18.865685] x8 : ffff80000b473330 x7 : 0000000000000000 x6 : 0000000000000000
[   18.872851] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff80000b4732f8
[   18.880017] x2 : 000000000000001a x1 : 0000000000000002 x0 : ffff6eeb07b6ab68
[   18.887183] Call trace:
[   18.889637]  mvpp2_start_dev+0x2b0/0x300 [mvpp2]
[   18.894279]  mvpp2_open+0x134/0x2b4 [mvpp2]
[   18.898483]  __dev_open+0x128/0x1e4
[   18.901988]  __dev_change_flags+0x17c/0x1d0
[   18.906187]  dev_change_flags+0x30/0x70
[   18.910038]  do_setlink+0x278/0xa7c
[   18.913540]  __rtnl_newlink+0x44c/0x7d0
[   18.917391]  rtnl_newlink+0x5c/0x8c
[   18.920892]  rtnetlink_rcv_msg+0x254/0x314
[   18.925006]  netlink_rcv_skb+0x48/0x10c
[   18.928858]  rtnetlink_rcv+0x24/0x30
[   18.932449]  netlink_unicast+0x290/0x2f4
[   18.936386]  netlink_sendmsg+0x1d0/0x41c
[   18.940323]  sock_sendmsg+0x60/0x70
[   18.943825]  ____sys_sendmsg+0x248/0x260
[   18.947762]  ___sys_sendmsg+0x74/0xa0
[   18.951438]  __sys_sendmsg+0x64/0xcc
[   18.955027]  __arm64_sys_sendmsg+0x30/0x40
[   18.959140]  invoke_syscall+0x50/0x120
[   18.962906]  el0_svc_common.constprop.0+0x4c/0xf4
[   18.967629]  do_el0_svc+0x30/0x9c
[   18.970958]  el0_svc+0x28/0xb0
[   18.974025]  el0t_64_sync_handler+0x10c/0x140
[   18.978400]  el0t_64_sync+0x1a4/0x1a8
[   18.982078] Code: 52800004 b9416262 aa1503e0 52800041 (f94008a5)
[   18.988196] ---[ end trace 0000000000000000 ]---

Fixes: cff056322372 ("net: mvpp2: use .mac_select_pcs() interface")
Suggested-by: Russell King (Oracle) <redacted>
Signed-off-by: Jeremy Linton <redacted>
---
v1->v2: Apply Russell's fix
v2->v3: Fix Russell's name

 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 7cdbf8b8bbf6..1a835b48791b 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -6870,6 +6870,9 @@ static int mvpp2_port_probe(struct platform_device *pdev,
        dev->max_mtu = MVPP2_BM_JUMBO_PKT_SIZE;
        dev->dev.of_node = port_node;

+       port->pcs_gmac.ops = &mvpp2_phylink_gmac_pcs_ops;
+       port->pcs_xlg.ops = &mvpp2_phylink_xlg_pcs_ops;
+
        if (!mvpp2_use_acpi_compat_mode(port_fwnode)) {
                port->phylink_config.dev = &dev->dev;
                port->phylink_config.type = PHYLINK_NETDEV;
@@ -6940,9 +6943,6 @@ static int mvpp2_port_probe(struct platform_device *pdev,
                                  port->phylink_config.supported_interfaces);
                }

-               port->pcs_gmac.ops = &mvpp2_phylink_gmac_pcs_ops;
-               port->pcs_xlg.ops = &mvpp2_phylink_xlg_pcs_ops;
-
                phylink = phylink_create(&port->phylink_config, port_fwnode,
                                         phy_mode, &mvpp2_phylink_ops);
                if (IS_ERR(phylink)) {
--
2.34.1
I'd like to test the patch - what EDK2 version are you using?

Best regards,
Marcin

Re: [BUG/PATCH v3] net: mvpp2: always set port pcs ops

From: Jeremy Linton <hidden>
Date: 2022-02-15 14:37:10

Hi,

On 2/15/22 02:38, Marcin Wojtas wrote:
Hi Jeremy,


wt., 15 lut 2022 o 00:18 Jeremy Linton [off-list ref] napisał(a):
quoted
Booting a MACCHIATObin with 5.17, the system OOPs with
a null pointer deref when the network is started. This
is caused by the pcs->ops structure being null in
mcpp2_acpi_start() when it tries to call pcs_config().

Hoisting the code which sets pcs_gmac.ops and pcs_xlg.ops,
assuring they are always set, fixes the problem.

The OOPs looks like:
[   18.687760] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000010
[   18.698561] Mem abort info:
[   18.698564]   ESR = 0x96000004
[   18.698567]   EC = 0x25: DABT (current EL), IL = 32 bits
[   18.709821]   SET = 0, FnV = 0
[   18.714292]   EA = 0, S1PTW = 0
[   18.718833]   FSC = 0x04: level 0 translation fault
[   18.725126] Data abort info:
[   18.729408]   ISV = 0, ISS = 0x00000004
[   18.734655]   CM = 0, WnR = 0
[   18.738933] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000111bbf000
[   18.745409] [0000000000000010] pgd=0000000000000000, p4d=0000000000000000
[   18.752235] Internal error: Oops: 96000004 [#1] SMP
[   18.757134] Modules linked in: rfkill ip_set nf_tables nfnetlink qrtr sunrpc vfat fat omap_rng fuse zram xfs crct10dif_ce mvpp2 ghash_ce sbsa_gwdt phylink xhci_plat_hcd ahci_plam
[   18.773481] CPU: 0 PID: 681 Comm: NetworkManager Not tainted 5.17.0-0.rc3.89.fc36.aarch64 #1
[   18.781954] Hardware name: Marvell                         Armada 7k/8k Family Board      /Armada 7k/8k Family Board      , BIOS EDK II Jun  4 2019
[   18.795222] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   18.802213] pc : mvpp2_start_dev+0x2b0/0x300 [mvpp2]
[   18.807208] lr : mvpp2_start_dev+0x298/0x300 [mvpp2]
[   18.812197] sp : ffff80000b4732c0
[   18.815522] x29: ffff80000b4732c0 x28: 0000000000000000 x27: ffffccab38ae57f8
[   18.822689] x26: ffff6eeb03065a10 x25: ffff80000b473a30 x24: ffff80000b4735b8
[   18.829855] x23: 0000000000000000 x22: 00000000000001e0 x21: ffff6eeb07b6ab68
[   18.837021] x20: ffff6eeb07b6ab30 x19: ffff6eeb07b6a9c0 x18: 0000000000000014
[   18.844187] x17: 00000000f6232bfe x16: ffffccab899b1dc0 x15: 000000006a30f9fa
[   18.851353] x14: 000000003b77bd50 x13: 000006dc896f0e8e x12: 001bbbfccfd0d3a2
[   18.858519] x11: 0000000000001528 x10: 0000000000001548 x9 : ffffccab38ad0fb0
[   18.865685] x8 : ffff80000b473330 x7 : 0000000000000000 x6 : 0000000000000000
[   18.872851] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff80000b4732f8
[   18.880017] x2 : 000000000000001a x1 : 0000000000000002 x0 : ffff6eeb07b6ab68
[   18.887183] Call trace:
[   18.889637]  mvpp2_start_dev+0x2b0/0x300 [mvpp2]
[   18.894279]  mvpp2_open+0x134/0x2b4 [mvpp2]
[   18.898483]  __dev_open+0x128/0x1e4
[   18.901988]  __dev_change_flags+0x17c/0x1d0
[   18.906187]  dev_change_flags+0x30/0x70
[   18.910038]  do_setlink+0x278/0xa7c
[   18.913540]  __rtnl_newlink+0x44c/0x7d0
[   18.917391]  rtnl_newlink+0x5c/0x8c
[   18.920892]  rtnetlink_rcv_msg+0x254/0x314
[   18.925006]  netlink_rcv_skb+0x48/0x10c
[   18.928858]  rtnetlink_rcv+0x24/0x30
[   18.932449]  netlink_unicast+0x290/0x2f4
[   18.936386]  netlink_sendmsg+0x1d0/0x41c
[   18.940323]  sock_sendmsg+0x60/0x70
[   18.943825]  ____sys_sendmsg+0x248/0x260
[   18.947762]  ___sys_sendmsg+0x74/0xa0
[   18.951438]  __sys_sendmsg+0x64/0xcc
[   18.955027]  __arm64_sys_sendmsg+0x30/0x40
[   18.959140]  invoke_syscall+0x50/0x120
[   18.962906]  el0_svc_common.constprop.0+0x4c/0xf4
[   18.967629]  do_el0_svc+0x30/0x9c
[   18.970958]  el0_svc+0x28/0xb0
[   18.974025]  el0t_64_sync_handler+0x10c/0x140
[   18.978400]  el0t_64_sync+0x1a4/0x1a8
[   18.982078] Code: 52800004 b9416262 aa1503e0 52800041 (f94008a5)
[   18.988196] ---[ end trace 0000000000000000 ]---

Fixes: cff056322372 ("net: mvpp2: use .mac_select_pcs() interface")
Suggested-by: Russell King (Oracle) <redacted>
Signed-off-by: Jeremy Linton <redacted>
---
v1->v2: Apply Russell's fix
v2->v3: Fix Russell's name

  drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 6 +++---
  1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 7cdbf8b8bbf6..1a835b48791b 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -6870,6 +6870,9 @@ static int mvpp2_port_probe(struct platform_device *pdev,
         dev->max_mtu = MVPP2_BM_JUMBO_PKT_SIZE;
         dev->dev.of_node = port_node;

+       port->pcs_gmac.ops = &mvpp2_phylink_gmac_pcs_ops;
+       port->pcs_xlg.ops = &mvpp2_phylink_xlg_pcs_ops;
+
         if (!mvpp2_use_acpi_compat_mode(port_fwnode)) {
                 port->phylink_config.dev = &dev->dev;
                 port->phylink_config.type = PHYLINK_NETDEV;
@@ -6940,9 +6943,6 @@ static int mvpp2_port_probe(struct platform_device *pdev,
                                   port->phylink_config.supported_interfaces);
                 }

-               port->pcs_gmac.ops = &mvpp2_phylink_gmac_pcs_ops;
-               port->pcs_xlg.ops = &mvpp2_phylink_xlg_pcs_ops;
-
                 phylink = phylink_create(&port->phylink_config, port_fwnode,
                                          phy_mode, &mvpp2_phylink_ops);
                 if (IS_ERR(phylink)) {
--
2.34.1
I'd like to test the patch - what EDK2 version are you using?
I don't have access to the machine at the moment (maybe in a couple days 
again) but it was running a build from late 2019 IIRC. So, definitely 
not a bleeding edge version for sure.

Re: [BUG/PATCH v3] net: mvpp2: always set port pcs ops

From: Marcin Wojtas <hidden>
Date: 2022-02-15 16:45:12

Hi,

wt., 15 lut 2022 o 15:37 Jeremy Linton [off-list ref] napisał(a):
Hi,

On 2/15/22 02:38, Marcin Wojtas wrote:
quoted
Hi Jeremy,


wt., 15 lut 2022 o 00:18 Jeremy Linton [off-list ref] napisał(a):
quoted
Booting a MACCHIATObin with 5.17, the system OOPs with
a null pointer deref when the network is started. This
is caused by the pcs->ops structure being null in
mcpp2_acpi_start() when it tries to call pcs_config().

Hoisting the code which sets pcs_gmac.ops and pcs_xlg.ops,
assuring they are always set, fixes the problem.

The OOPs looks like:
[   18.687760] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000010
[   18.698561] Mem abort info:
[   18.698564]   ESR = 0x96000004
[   18.698567]   EC = 0x25: DABT (current EL), IL = 32 bits
[   18.709821]   SET = 0, FnV = 0
[   18.714292]   EA = 0, S1PTW = 0
[   18.718833]   FSC = 0x04: level 0 translation fault
[   18.725126] Data abort info:
[   18.729408]   ISV = 0, ISS = 0x00000004
[   18.734655]   CM = 0, WnR = 0
[   18.738933] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000111bbf000
[   18.745409] [0000000000000010] pgd=0000000000000000, p4d=0000000000000000
[   18.752235] Internal error: Oops: 96000004 [#1] SMP
[   18.757134] Modules linked in: rfkill ip_set nf_tables nfnetlink qrtr sunrpc vfat fat omap_rng fuse zram xfs crct10dif_ce mvpp2 ghash_ce sbsa_gwdt phylink xhci_plat_hcd ahci_plam
[   18.773481] CPU: 0 PID: 681 Comm: NetworkManager Not tainted 5.17.0-0.rc3.89.fc36.aarch64 #1
[   18.781954] Hardware name: Marvell                         Armada 7k/8k Family Board      /Armada 7k/8k Family Board      , BIOS EDK II Jun  4 2019
[   18.795222] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   18.802213] pc : mvpp2_start_dev+0x2b0/0x300 [mvpp2]
[   18.807208] lr : mvpp2_start_dev+0x298/0x300 [mvpp2]
[   18.812197] sp : ffff80000b4732c0
[   18.815522] x29: ffff80000b4732c0 x28: 0000000000000000 x27: ffffccab38ae57f8
[   18.822689] x26: ffff6eeb03065a10 x25: ffff80000b473a30 x24: ffff80000b4735b8
[   18.829855] x23: 0000000000000000 x22: 00000000000001e0 x21: ffff6eeb07b6ab68
[   18.837021] x20: ffff6eeb07b6ab30 x19: ffff6eeb07b6a9c0 x18: 0000000000000014
[   18.844187] x17: 00000000f6232bfe x16: ffffccab899b1dc0 x15: 000000006a30f9fa
[   18.851353] x14: 000000003b77bd50 x13: 000006dc896f0e8e x12: 001bbbfccfd0d3a2
[   18.858519] x11: 0000000000001528 x10: 0000000000001548 x9 : ffffccab38ad0fb0
[   18.865685] x8 : ffff80000b473330 x7 : 0000000000000000 x6 : 0000000000000000
[   18.872851] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff80000b4732f8
[   18.880017] x2 : 000000000000001a x1 : 0000000000000002 x0 : ffff6eeb07b6ab68
[   18.887183] Call trace:
[   18.889637]  mvpp2_start_dev+0x2b0/0x300 [mvpp2]
[   18.894279]  mvpp2_open+0x134/0x2b4 [mvpp2]
[   18.898483]  __dev_open+0x128/0x1e4
[   18.901988]  __dev_change_flags+0x17c/0x1d0
[   18.906187]  dev_change_flags+0x30/0x70
[   18.910038]  do_setlink+0x278/0xa7c
[   18.913540]  __rtnl_newlink+0x44c/0x7d0
[   18.917391]  rtnl_newlink+0x5c/0x8c
[   18.920892]  rtnetlink_rcv_msg+0x254/0x314
[   18.925006]  netlink_rcv_skb+0x48/0x10c
[   18.928858]  rtnetlink_rcv+0x24/0x30
[   18.932449]  netlink_unicast+0x290/0x2f4
[   18.936386]  netlink_sendmsg+0x1d0/0x41c
[   18.940323]  sock_sendmsg+0x60/0x70
[   18.943825]  ____sys_sendmsg+0x248/0x260
[   18.947762]  ___sys_sendmsg+0x74/0xa0
[   18.951438]  __sys_sendmsg+0x64/0xcc
[   18.955027]  __arm64_sys_sendmsg+0x30/0x40
[   18.959140]  invoke_syscall+0x50/0x120
[   18.962906]  el0_svc_common.constprop.0+0x4c/0xf4
[   18.967629]  do_el0_svc+0x30/0x9c
[   18.970958]  el0_svc+0x28/0xb0
[   18.974025]  el0t_64_sync_handler+0x10c/0x140
[   18.978400]  el0t_64_sync+0x1a4/0x1a8
[   18.982078] Code: 52800004 b9416262 aa1503e0 52800041 (f94008a5)
[   18.988196] ---[ end trace 0000000000000000 ]---

Fixes: cff056322372 ("net: mvpp2: use .mac_select_pcs() interface")
Suggested-by: Russell King (Oracle) <redacted>
Signed-off-by: Jeremy Linton <redacted>
---
v1->v2: Apply Russell's fix
v2->v3: Fix Russell's name

  drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 6 +++---
  1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 7cdbf8b8bbf6..1a835b48791b 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -6870,6 +6870,9 @@ static int mvpp2_port_probe(struct platform_device *pdev,
         dev->max_mtu = MVPP2_BM_JUMBO_PKT_SIZE;
         dev->dev.of_node = port_node;

+       port->pcs_gmac.ops = &mvpp2_phylink_gmac_pcs_ops;
+       port->pcs_xlg.ops = &mvpp2_phylink_xlg_pcs_ops;
+
         if (!mvpp2_use_acpi_compat_mode(port_fwnode)) {
                 port->phylink_config.dev = &dev->dev;
                 port->phylink_config.type = PHYLINK_NETDEV;
@@ -6940,9 +6943,6 @@ static int mvpp2_port_probe(struct platform_device *pdev,
                                   port->phylink_config.supported_interfaces);
                 }

-               port->pcs_gmac.ops = &mvpp2_phylink_gmac_pcs_ops;
-               port->pcs_xlg.ops = &mvpp2_phylink_xlg_pcs_ops;
-
                 phylink = phylink_create(&port->phylink_config, port_fwnode,
                                          phy_mode, &mvpp2_phylink_ops);
                 if (IS_ERR(phylink)) {
--
2.34.1
I'd like to test the patch - what EDK2 version are you using?
I don't have access to the machine at the moment (maybe in a couple days
again) but it was running a build from late 2019 IIRC. So, definitely
not a bleeding edge version for sure.
2019 is enough indicator that most likely there is no MDIO description
in ACPI. Let me test the patch, thanks.

Best regards,
Marcin

Re: [BUG/PATCH v3] net: mvpp2: always set port pcs ops

From: Jakub Kicinski <kuba@kernel.org>
Date: 2022-02-18 00:07:31

On Tue, 15 Feb 2022 17:44:53 +0100 Marcin Wojtas wrote:
quoted
I don't have access to the machine at the moment (maybe in a couple days
again) but it was running a build from late 2019 IIRC. So, definitely
not a bleeding edge version for sure.
 
2019 is enough indicator that most likely there is no MDIO description
in ACPI. Let me test the patch, thanks.
Any luck with the testing? I wonder if we should keep the patch in or
drop it for now and ask for repost once tested..

Re: [BUG/PATCH v3] net: mvpp2: always set port pcs ops

From: Marcin Wojtas <hidden>
Date: 2022-02-18 16:01:40

Hi,

pt., 18 lut 2022 o 00:57 Jakub Kicinski [off-list ref] napisał(a):
On Tue, 15 Feb 2022 17:44:53 +0100 Marcin Wojtas wrote:
quoted
quoted
I don't have access to the machine at the moment (maybe in a couple days
again) but it was running a build from late 2019 IIRC. So, definitely
not a bleeding edge version for sure.
2019 is enough indicator that most likely there is no MDIO description
in ACPI. Let me test the patch, thanks.
Any luck with the testing? I wonder if we should keep the patch in or
drop it for now and ask for repost once tested..
I'll update today, sorry for the delay.

Marcin

Re: [BUG/PATCH v3] net: mvpp2: always set port pcs ops

From: Marcin Wojtas <hidden>
Date: 2022-02-18 23:49:37

wt., 15 lut 2022 o 00:18 Jeremy Linton [off-list ref] napisał(a):
quoted hunk
Booting a MACCHIATObin with 5.17, the system OOPs with
a null pointer deref when the network is started. This
is caused by the pcs->ops structure being null in
mcpp2_acpi_start() when it tries to call pcs_config().

Hoisting the code which sets pcs_gmac.ops and pcs_xlg.ops,
assuring they are always set, fixes the problem.

The OOPs looks like:
[   18.687760] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000010
[   18.698561] Mem abort info:
[   18.698564]   ESR = 0x96000004
[   18.698567]   EC = 0x25: DABT (current EL), IL = 32 bits
[   18.709821]   SET = 0, FnV = 0
[   18.714292]   EA = 0, S1PTW = 0
[   18.718833]   FSC = 0x04: level 0 translation fault
[   18.725126] Data abort info:
[   18.729408]   ISV = 0, ISS = 0x00000004
[   18.734655]   CM = 0, WnR = 0
[   18.738933] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000111bbf000
[   18.745409] [0000000000000010] pgd=0000000000000000, p4d=0000000000000000
[   18.752235] Internal error: Oops: 96000004 [#1] SMP
[   18.757134] Modules linked in: rfkill ip_set nf_tables nfnetlink qrtr sunrpc vfat fat omap_rng fuse zram xfs crct10dif_ce mvpp2 ghash_ce sbsa_gwdt phylink xhci_plat_hcd ahci_plam
[   18.773481] CPU: 0 PID: 681 Comm: NetworkManager Not tainted 5.17.0-0.rc3.89.fc36.aarch64 #1
[   18.781954] Hardware name: Marvell                         Armada 7k/8k Family Board      /Armada 7k/8k Family Board      , BIOS EDK II Jun  4 2019
[   18.795222] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   18.802213] pc : mvpp2_start_dev+0x2b0/0x300 [mvpp2]
[   18.807208] lr : mvpp2_start_dev+0x298/0x300 [mvpp2]
[   18.812197] sp : ffff80000b4732c0
[   18.815522] x29: ffff80000b4732c0 x28: 0000000000000000 x27: ffffccab38ae57f8
[   18.822689] x26: ffff6eeb03065a10 x25: ffff80000b473a30 x24: ffff80000b4735b8
[   18.829855] x23: 0000000000000000 x22: 00000000000001e0 x21: ffff6eeb07b6ab68
[   18.837021] x20: ffff6eeb07b6ab30 x19: ffff6eeb07b6a9c0 x18: 0000000000000014
[   18.844187] x17: 00000000f6232bfe x16: ffffccab899b1dc0 x15: 000000006a30f9fa
[   18.851353] x14: 000000003b77bd50 x13: 000006dc896f0e8e x12: 001bbbfccfd0d3a2
[   18.858519] x11: 0000000000001528 x10: 0000000000001548 x9 : ffffccab38ad0fb0
[   18.865685] x8 : ffff80000b473330 x7 : 0000000000000000 x6 : 0000000000000000
[   18.872851] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff80000b4732f8
[   18.880017] x2 : 000000000000001a x1 : 0000000000000002 x0 : ffff6eeb07b6ab68
[   18.887183] Call trace:
[   18.889637]  mvpp2_start_dev+0x2b0/0x300 [mvpp2]
[   18.894279]  mvpp2_open+0x134/0x2b4 [mvpp2]
[   18.898483]  __dev_open+0x128/0x1e4
[   18.901988]  __dev_change_flags+0x17c/0x1d0
[   18.906187]  dev_change_flags+0x30/0x70
[   18.910038]  do_setlink+0x278/0xa7c
[   18.913540]  __rtnl_newlink+0x44c/0x7d0
[   18.917391]  rtnl_newlink+0x5c/0x8c
[   18.920892]  rtnetlink_rcv_msg+0x254/0x314
[   18.925006]  netlink_rcv_skb+0x48/0x10c
[   18.928858]  rtnetlink_rcv+0x24/0x30
[   18.932449]  netlink_unicast+0x290/0x2f4
[   18.936386]  netlink_sendmsg+0x1d0/0x41c
[   18.940323]  sock_sendmsg+0x60/0x70
[   18.943825]  ____sys_sendmsg+0x248/0x260
[   18.947762]  ___sys_sendmsg+0x74/0xa0
[   18.951438]  __sys_sendmsg+0x64/0xcc
[   18.955027]  __arm64_sys_sendmsg+0x30/0x40
[   18.959140]  invoke_syscall+0x50/0x120
[   18.962906]  el0_svc_common.constprop.0+0x4c/0xf4
[   18.967629]  do_el0_svc+0x30/0x9c
[   18.970958]  el0_svc+0x28/0xb0
[   18.974025]  el0t_64_sync_handler+0x10c/0x140
[   18.978400]  el0t_64_sync+0x1a4/0x1a8
[   18.982078] Code: 52800004 b9416262 aa1503e0 52800041 (f94008a5)
[   18.988196] ---[ end trace 0000000000000000 ]---

Fixes: cff056322372 ("net: mvpp2: use .mac_select_pcs() interface")
Suggested-by: Russell King (Oracle) <redacted>
Signed-off-by: Jeremy Linton <redacted>
---
v1->v2: Apply Russell's fix
v2->v3: Fix Russell's name

 drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 7cdbf8b8bbf6..1a835b48791b 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -6870,6 +6870,9 @@ static int mvpp2_port_probe(struct platform_device *pdev,
        dev->max_mtu = MVPP2_BM_JUMBO_PKT_SIZE;
        dev->dev.of_node = port_node;

+       port->pcs_gmac.ops = &mvpp2_phylink_gmac_pcs_ops;
+       port->pcs_xlg.ops = &mvpp2_phylink_xlg_pcs_ops;
+
        if (!mvpp2_use_acpi_compat_mode(port_fwnode)) {
                port->phylink_config.dev = &dev->dev;
                port->phylink_config.type = PHYLINK_NETDEV;
@@ -6940,9 +6943,6 @@ static int mvpp2_port_probe(struct platform_device *pdev,
                                  port->phylink_config.supported_interfaces);
                }

-               port->pcs_gmac.ops = &mvpp2_phylink_gmac_pcs_ops;
-               port->pcs_xlg.ops = &mvpp2_phylink_xlg_pcs_ops;
-
                phylink = phylink_create(&port->phylink_config, port_fwnode,
                                         phy_mode, &mvpp2_phylink_ops);
                if (IS_ERR(phylink)) {
All works fine in my setup, thanks!

You can add my:
Reviewed-by: Marcin Wojtas <redacted>

Re: [BUG/PATCH v3] net: mvpp2: always set port pcs ops

From: Jakub Kicinski <kuba@kernel.org>
Date: 2022-02-19 04:44:32

On Sat, 19 Feb 2022 00:49:27 +0100 Marcin Wojtas wrote:
wt., 15 lut 2022 o 00:18 Jeremy Linton [off-list ref] napisał(a):
quoted
Booting a MACCHIATObin with 5.17, the system OOPs with
a null pointer deref when the network is started. This
is caused by the pcs->ops structure being null in
mcpp2_acpi_start() when it tries to call pcs_config().

Hoisting the code which sets pcs_gmac.ops and pcs_xlg.ops,
assuring they are always set, fixes the problem.
quoted
Fixes: cff056322372 ("net: mvpp2: use .mac_select_pcs() interface")
Suggested-by: Russell King (Oracle) <redacted>
Signed-off-by: Jeremy Linton <redacted>
You can add my:
Reviewed-by: Marcin Wojtas <redacted>
Perfect, thanks everyone! 

It's now 5a2aba71cd26 ("net: mvpp2: always set port pcs ops") in net.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help