[PATCH] nixge: fix mac address error handling again

Subsystems: networking drivers, the rest

STALE1720d

3 messages, 3 authors, 2021-11-22 · open the first message on its own page

[PATCH] nixge: fix mac address error handling again

From: Arnd Bergmann <arnd@kernel.org>
Date: 2021-11-22 15:03:29

From: Arnd Bergmann <arnd@arndb.de>

The change to eth_hw_addr_set() caused gcc to correctly spot a
bug that was introduced in an earlier incorrect fix:

In file included from include/linux/etherdevice.h:21,
                 from drivers/net/ethernet/ni/nixge.c:7:
In function '__dev_addr_set',
    inlined from 'eth_hw_addr_set' at include/linux/etherdevice.h:319:2,
    inlined from 'nixge_probe' at drivers/net/ethernet/ni/nixge.c:1286:3:
include/linux/netdevice.h:4648:9: error: 'memcpy' reading 6 bytes from a region of size 0 [-Werror=stringop-overread]
 4648 |         memcpy(dev->dev_addr, addr, len);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

As nixge_get_nvmem_address() can return either NULL or an error
pointer, the NULL check is wrong, and we can end up reading from
ERR_PTR(-EOPNOTSUPP), which gcc knows to contain zero readable
bytes.

Make the function always return an error pointer again but fix
the check to match that.

Fixes: f3956ebb3bf0 ("ethernet: use eth_hw_addr_set() instead of ether_addr_copy()")
Fixes: abcd3d6fc640 ("net: nixge: Fix error path for obtaining mac address")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/net/ethernet/ni/nixge.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/ni/nixge.c b/drivers/net/ethernet/ni/nixge.c
index cfeb7620ae20..07a00dd9cfe0 100644
--- a/drivers/net/ethernet/ni/nixge.c
+++ b/drivers/net/ethernet/ni/nixge.c
@@ -1209,7 +1209,7 @@ static void *nixge_get_nvmem_address(struct device *dev)
 
 	cell = nvmem_cell_get(dev, "address");
 	if (IS_ERR(cell))
-		return NULL;
+		return cell;
 
 	mac = nvmem_cell_read(cell, &cell_size);
 	nvmem_cell_put(cell);
@@ -1282,7 +1282,7 @@ static int nixge_probe(struct platform_device *pdev)
 	ndev->max_mtu = NIXGE_JUMBO_MTU;
 
 	mac_addr = nixge_get_nvmem_address(&pdev->dev);
-	if (mac_addr && is_valid_ether_addr(mac_addr)) {
+	if (!IS_ERR(mac_addr) && is_valid_ether_addr(mac_addr)) {
 		eth_hw_addr_set(ndev, mac_addr);
 		kfree(mac_addr);
 	} else {
-- 
2.29.2

Re: [PATCH] nixge: fix mac address error handling again

From: Arnd Bergmann <arnd@arndb.de>
Date: 2021-11-22 15:07:15

On Mon, Nov 22, 2021 at 4:02 PM Arnd Bergmann [off-list ref] wrote:
From: Arnd Bergmann <arnd@arndb.de>

The change to eth_hw_addr_set() caused gcc to correctly spot a
bug that was introduced in an earlier incorrect fix:

In file included from include/linux/etherdevice.h:21,
                 from drivers/net/ethernet/ni/nixge.c:7:
In function '__dev_addr_set',
    inlined from 'eth_hw_addr_set' at include/linux/etherdevice.h:319:2,
    inlined from 'nixge_probe' at drivers/net/ethernet/ni/nixge.c:1286:3:
include/linux/netdevice.h:4648:9: error: 'memcpy' reading 6 bytes from a region of size 0 [-Werror=stringop-overread]
 4648 |         memcpy(dev->dev_addr, addr, len);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

As nixge_get_nvmem_address() can return either NULL or an error
pointer, the NULL check is wrong, and we can end up reading from
ERR_PTR(-EOPNOTSUPP), which gcc knows to contain zero readable
bytes.

Make the function always return an error pointer again but fix
the check to match that.

Fixes: f3956ebb3bf0 ("ethernet: use eth_hw_addr_set() instead of ether_addr_copy()")
Fixes: abcd3d6fc640 ("net: nixge: Fix error path for obtaining mac address")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Sorry, I sent out the wrong patch, this version fixes the bug but not the
warning. v2 is the version I actually tested successfully.

       Arnd

Re: [PATCH] nixge: fix mac address error handling again

From: patchwork-bot+netdevbpf@kernel.org
Date: 2021-11-22 15:10:15

Hello:

This patch was applied to netdev/net.git (master)
by David S. Miller [off-list ref]:

On Mon, 22 Nov 2021 16:02:49 +0100 you wrote:
From: Arnd Bergmann <arnd@arndb.de>

The change to eth_hw_addr_set() caused gcc to correctly spot a
bug that was introduced in an earlier incorrect fix:

In file included from include/linux/etherdevice.h:21,
                 from drivers/net/ethernet/ni/nixge.c:7:
In function '__dev_addr_set',
    inlined from 'eth_hw_addr_set' at include/linux/etherdevice.h:319:2,
    inlined from 'nixge_probe' at drivers/net/ethernet/ni/nixge.c:1286:3:
include/linux/netdevice.h:4648:9: error: 'memcpy' reading 6 bytes from a region of size 0 [-Werror=stringop-overread]
 4648 |         memcpy(dev->dev_addr, addr, len);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[...]
Here is the summary with links:
  - nixge: fix mac address error handling again
    https://git.kernel.org/netdev/net/c/a68229ca6340

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help