[RFC v1] mac80211: minstrel_ht: respect RTS threshold setting

Subsystems: mac80211, the rest

2 messages, 1 author, 2021-11-16 · open the first message on its own page

[RFC v1] mac80211: minstrel_ht: respect RTS threshold setting

From: Peter Seiderer <hidden>
Date: 2021-10-26 20:41:59

Despite the 'RTS thr:off' setting a wireshark trace of IBSS
traffic with HT40 mode enabled between two ath9k cards revealed
some RTS/CTS traffic.

Debug and code analysis showed that most places setting
IEEE80211_TX_RC_USE_RTS_CTS respect the RTS strategy by
evaluating rts_threshold, e.g. net/mac80211/tx.c:

 698         /* set up RTS protection if desired */
 699         if (len > tx->local->hw.wiphy->rts_threshold) {
 700                 txrc.rts = true;
 701         }
 702
 703         info->control.use_rts = txrc.rts;

or drivers/net/wireless/ath/ath9k/xmit.c

1238                 /*
1239                  * Handle RTS threshold for unaggregated HT frames.
1240                  */
1241                 if (bf_isampdu(bf) && !bf_isaggr(bf) &&
1242                     (rates[i].flags & IEEE80211_TX_RC_MCS) &&
1243                     unlikely(rts_thresh != (u32) -1)) {
1244                         if (!rts_thresh || (len > rts_thresh))
1245                                 rts = true;
1246                 }

The only place setting IEEE80211_TX_RC_USE_RTS_CTS unconditionally
was found in net/mac80211/rc80211_minstrel_ht.c.

Fix this by propagating the calculated use_rts value to the
minstrel_ht_set_rate() function and evaluate it accordingly
before setting IEEE80211_TX_RC_USE_RTS_CTS.

Signed-off-by: Peter Seiderer <redacted>
---
 net/mac80211/rc80211_minstrel_ht.c | 21 ++++++++++++---------
 1 file changed, 12 insertions(+), 9 deletions(-)
diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c
index 72b44d4c42d0..f52edef443fa 100644
--- a/net/mac80211/rc80211_minstrel_ht.c
+++ b/net/mac80211/rc80211_minstrel_ht.c
@@ -276,7 +276,8 @@ static const u8 minstrel_sample_seq[] = {
 };
 
 static void
-minstrel_ht_update_rates(struct minstrel_priv *mp, struct minstrel_ht_sta *mi);
+minstrel_ht_update_rates(struct minstrel_priv *mp, struct minstrel_ht_sta *mi,
+			 bool use_rts);
 
 /*
  * Some VHT MCSes are invalid (when Ndbps / Nes is not an integer)
@@ -1254,7 +1255,7 @@ minstrel_ht_tx_status(void *priv, struct ieee80211_supported_band *sband,
 	}
 
 	if (update)
-		minstrel_ht_update_rates(mp, mi);
+		minstrel_ht_update_rates(mp, mi, info->control.use_rts);
 }
 
 static void
@@ -1319,7 +1320,8 @@ minstrel_calc_retransmit(struct minstrel_priv *mp, struct minstrel_ht_sta *mi,
 
 static void
 minstrel_ht_set_rate(struct minstrel_priv *mp, struct minstrel_ht_sta *mi,
-                     struct ieee80211_sta_rates *ratetbl, int offset, int index)
+		     struct ieee80211_sta_rates *ratetbl, int offset, int index,
+		     bool use_rts)
 {
 	int group_idx = MI_RATE_GROUP(index);
 	const struct mcs_group *group = &minstrel_mcs_groups[group_idx];
@@ -1357,7 +1359,7 @@ minstrel_ht_set_rate(struct minstrel_priv *mp, struct minstrel_ht_sta *mi,
 	 *  - if station is in dynamic SMPS (and streams > 1)
 	 *  - for fallback rates, to increase chances of getting through
 	 */
-	if (offset > 0 ||
+	if ((offset > 0 && use_rts) ||
 	    (mi->sta->smps_mode == IEEE80211_SMPS_DYNAMIC &&
 	     group->streams > 1)) {
 		ratetbl->rate[offset].count = ratetbl->rate[offset].count_rts;
@@ -1426,7 +1428,8 @@ minstrel_ht_get_max_amsdu_len(struct minstrel_ht_sta *mi)
 }
 
 static void
-minstrel_ht_update_rates(struct minstrel_priv *mp, struct minstrel_ht_sta *mi)
+minstrel_ht_update_rates(struct minstrel_priv *mp, struct minstrel_ht_sta *mi,
+			 bool use_rts)
 {
 	struct ieee80211_sta_rates *rates;
 	int i = 0;
@@ -1436,15 +1439,15 @@ minstrel_ht_update_rates(struct minstrel_priv *mp, struct minstrel_ht_sta *mi)
 		return;
 
 	/* Start with max_tp_rate[0] */
-	minstrel_ht_set_rate(mp, mi, rates, i++, mi->max_tp_rate[0]);
+	minstrel_ht_set_rate(mp, mi, rates, i++, mi->max_tp_rate[0], use_rts);
 
 	if (mp->hw->max_rates >= 3) {
 		/* At least 3 tx rates supported, use max_tp_rate[1] next */
-		minstrel_ht_set_rate(mp, mi, rates, i++, mi->max_tp_rate[1]);
+		minstrel_ht_set_rate(mp, mi, rates, i++, mi->max_tp_rate[1], use_rts);
 	}
 
 	if (mp->hw->max_rates >= 2) {
-		minstrel_ht_set_rate(mp, mi, rates, i++, mi->max_prob_rate);
+		minstrel_ht_set_rate(mp, mi, rates, i++, mi->max_prob_rate, use_rts);
 	}
 
 	mi->sta->max_rc_amsdu_len = minstrel_ht_get_max_amsdu_len(mi);
@@ -1705,7 +1708,7 @@ minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband,
 
 	/* create an initial rate table with the lowest supported rates */
 	minstrel_ht_update_stats(mp, mi);
-	minstrel_ht_update_rates(mp, mi);
+	minstrel_ht_update_rates(mp, mi, false);
 }
 
 static void
-- 
2.33.1

Re: [RFC v1] mac80211: minstrel_ht: respect RTS threshold setting

From: Peter Seiderer <hidden>
Date: 2021-11-16 21:10:55

On Tue, 26 Oct 2021 22:41:44 +0200, Peter Seiderer [off-list ref] wrote:
Despite the 'RTS thr:off' setting a wireshark trace of IBSS
traffic with HT40 mode enabled between two ath9k cards revealed
some RTS/CTS traffic.

Debug and code analysis showed that most places setting
IEEE80211_TX_RC_USE_RTS_CTS respect the RTS strategy by
evaluating rts_threshold, e.g. net/mac80211/tx.c:

 698         /* set up RTS protection if desired */
 699         if (len > tx->local->hw.wiphy->rts_threshold) {
 700                 txrc.rts = true;
 701         }
 702
 703         info->control.use_rts = txrc.rts;

or drivers/net/wireless/ath/ath9k/xmit.c

1238                 /*
1239                  * Handle RTS threshold for unaggregated HT frames.
1240                  */
1241                 if (bf_isampdu(bf) && !bf_isaggr(bf) &&
1242                     (rates[i].flags & IEEE80211_TX_RC_MCS) &&
1243                     unlikely(rts_thresh != (u32) -1)) {
1244                         if (!rts_thresh || (len > rts_thresh))
1245                                 rts = true;
1246                 }

The only place setting IEEE80211_TX_RC_USE_RTS_CTS unconditionally
was found in net/mac80211/rc80211_minstrel_ht.c.

Fix this by propagating the calculated use_rts value to the
minstrel_ht_set_rate() function and evaluate it accordingly
before setting IEEE80211_TX_RC_USE_RTS_CTS.
Despite my believe after code review the use_rts value is only calculated
after hitting the minstrel_ht code, so my preferred alternative solution
would be to NOT requesting RTS/CTS from the minstrel_ht code (for the
fallback rates case)...., updated patch will follow...

Regards,
Peter
quoted hunk
Signed-off-by: Peter Seiderer <redacted>
---
 net/mac80211/rc80211_minstrel_ht.c | 21 ++++++++++++---------
 1 file changed, 12 insertions(+), 9 deletions(-)
diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c
index 72b44d4c42d0..f52edef443fa 100644
--- a/net/mac80211/rc80211_minstrel_ht.c
+++ b/net/mac80211/rc80211_minstrel_ht.c
@@ -276,7 +276,8 @@ static const u8 minstrel_sample_seq[] = {
 };

 static void
-minstrel_ht_update_rates(struct minstrel_priv *mp, struct minstrel_ht_sta *mi);
+minstrel_ht_update_rates(struct minstrel_priv *mp, struct minstrel_ht_sta *mi,
+			 bool use_rts);

 /*
  * Some VHT MCSes are invalid (when Ndbps / Nes is not an integer)
@@ -1254,7 +1255,7 @@ minstrel_ht_tx_status(void *priv, struct ieee80211_supported_band *sband,
 	}

 	if (update)
-		minstrel_ht_update_rates(mp, mi);
+		minstrel_ht_update_rates(mp, mi, info->control.use_rts);
 }

 static void
@@ -1319,7 +1320,8 @@ minstrel_calc_retransmit(struct minstrel_priv *mp, struct minstrel_ht_sta *mi,

 static void
 minstrel_ht_set_rate(struct minstrel_priv *mp, struct minstrel_ht_sta *mi,
-                     struct ieee80211_sta_rates *ratetbl, int offset, int index)
+		     struct ieee80211_sta_rates *ratetbl, int offset, int index,
+		     bool use_rts)
 {
 	int group_idx = MI_RATE_GROUP(index);
 	const struct mcs_group *group = &minstrel_mcs_groups[group_idx];
@@ -1357,7 +1359,7 @@ minstrel_ht_set_rate(struct minstrel_priv *mp, struct minstrel_ht_sta *mi,
 	 *  - if station is in dynamic SMPS (and streams > 1)
 	 *  - for fallback rates, to increase chances of getting through
 	 */
-	if (offset > 0 ||
+	if ((offset > 0 && use_rts) ||
 	    (mi->sta->smps_mode == IEEE80211_SMPS_DYNAMIC &&
 	     group->streams > 1)) {
 		ratetbl->rate[offset].count = ratetbl->rate[offset].count_rts;
@@ -1426,7 +1428,8 @@ minstrel_ht_get_max_amsdu_len(struct minstrel_ht_sta *mi)
 }

 static void
-minstrel_ht_update_rates(struct minstrel_priv *mp, struct minstrel_ht_sta *mi)
+minstrel_ht_update_rates(struct minstrel_priv *mp, struct minstrel_ht_sta *mi,
+			 bool use_rts)
 {
 	struct ieee80211_sta_rates *rates;
 	int i = 0;
@@ -1436,15 +1439,15 @@ minstrel_ht_update_rates(struct minstrel_priv *mp, struct minstrel_ht_sta *mi)
 		return;

 	/* Start with max_tp_rate[0] */
-	minstrel_ht_set_rate(mp, mi, rates, i++, mi->max_tp_rate[0]);
+	minstrel_ht_set_rate(mp, mi, rates, i++, mi->max_tp_rate[0], use_rts);

 	if (mp->hw->max_rates >= 3) {
 		/* At least 3 tx rates supported, use max_tp_rate[1] next */
-		minstrel_ht_set_rate(mp, mi, rates, i++, mi->max_tp_rate[1]);
+		minstrel_ht_set_rate(mp, mi, rates, i++, mi->max_tp_rate[1], use_rts);
 	}

 	if (mp->hw->max_rates >= 2) {
-		minstrel_ht_set_rate(mp, mi, rates, i++, mi->max_prob_rate);
+		minstrel_ht_set_rate(mp, mi, rates, i++, mi->max_prob_rate, use_rts);
 	}

 	mi->sta->max_rc_amsdu_len = minstrel_ht_get_max_amsdu_len(mi);
@@ -1705,7 +1708,7 @@ minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband,

 	/* create an initial rate table with the lowest supported rates */
 	minstrel_ht_update_stats(mp, mi);
-	minstrel_ht_update_rates(mp, mi);
+	minstrel_ht_update_rates(mp, mi, false);
 }

 static void

Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help