From: Dave Marchevsky <hidden> Date: 2021-09-20 15:11:35
The verifier currently logs some useful statistics in
print_verification_stats. Although the text log is an effective feedback
tool for an engineer iterating on a single application, it would also be
useful to enable tracking these stats in a more structured form for
fleetwide or historical analysis, which this patchset attempts to do.
A concrete motivating usecase which came up in recent weeks:
A team owns a complex BPF program, with various folks extending its
functionality over the years. An engineer tries to make a relatively
simple addition but encounters "BPF program is too large. Processed
1000001 insn".
Their changes bumped the processed insns from 700k to over the limit and
there's no obvious way to simplify. They must now consider a large
refactor in order to incorporate the new feature. What if there was some
previous change which bumped processed insns from 200k->700k which
_could_ be modified to stress verifier less? Tracking historical
verifier stats for each version of the program over the years would
reduce manual work necessary to find such a change.
Although parsing the text log could work for this scenario, a solution
that's resilient to log format and other verifier changes would be
preferable.
This patchset adds a bpf_prog_verif_stats struct - containing the same
data logged by print_verification_stats - which can be retrieved as part
of bpf_prog_info. Looking for general feedback on approach and a few
specific areas before fleshing it out further:
* None of my usecases require storing verif_stats for the lifetime of a
loaded prog, but adding to bpf_prog_aux felt more correct than trying
to pass verif_stats back as part of BPF_PROG_LOAD
* The verif_stats are probably not generally useful enough to warrant
inclusion in fdinfo, but hoping to get confirmation before removing
that change in patch 1
* processed_insn, verification_time, and total_states are immediately
useful for me, rest were added for parity with
print_verification_stats. Can remove.
* Perhaps a version field would be useful in verif_stats in case future
verifier changes make some current stats meaningless
* Note: stack_depth stat was intentionally skipped to keep patch 1
simple. Will add if approach looks good.
Dave Marchevsky (2):
bpf: add verifier stats to bpf_prog_info and fdinfo
selftests/bpf: add verif_stats test
include/linux/bpf.h | 1 +
include/uapi/linux/bpf.h | 10 ++++++
kernel/bpf/syscall.c | 20 +++++++++--
kernel/bpf/verifier.c | 13 +++++++
tools/include/uapi/linux/bpf.h | 10 ++++++
.../selftests/bpf/prog_tests/verif_stats.c | 34 +++++++++++++++++++
6 files changed, 86 insertions(+), 2 deletions(-)
create mode 100644 tools/testing/selftests/bpf/prog_tests/verif_stats.c
--
2.30.2
From: Dave Marchevsky <hidden> Date: 2021-09-20 15:11:44
These stats are currently printed in the verifier log and not stored
anywhere. To ease consumption of this data, add a bpf_prog_verif_stats
struct to bpf_prog_aux so they can be exposed via BPF_OBJ_GET_INFO_BY_FD
and fdinfo.
Signed-off-by: Dave Marchevsky <redacted>
---
include/linux/bpf.h | 1 +
include/uapi/linux/bpf.h | 10 ++++++++++
kernel/bpf/syscall.c | 20 ++++++++++++++++++--
kernel/bpf/verifier.c | 13 +++++++++++++
tools/include/uapi/linux/bpf.h | 10 ++++++++++
5 files changed, 52 insertions(+), 2 deletions(-)
From: Dave Marchevsky <hidden> Date: 2021-09-20 15:11:45
verif_stats fields were added to response of bpf_obj_get_info_by_fd
call on a prog. Confirm that they're being populated by loading a simple
program and asking for its info.
Signed-off-by: Dave Marchevsky <redacted>
---
.../selftests/bpf/prog_tests/verif_stats.c | 34 +++++++++++++++++++
1 file changed, 34 insertions(+)
create mode 100644 tools/testing/selftests/bpf/prog_tests/verif_stats.c
On Mon, Sep 20, 2021 at 08:11:10AM -0700, Dave Marchevsky wrote:
The verifier currently logs some useful statistics in
print_verification_stats. Although the text log is an effective feedback
tool for an engineer iterating on a single application, it would also be
useful to enable tracking these stats in a more structured form for
fleetwide or historical analysis, which this patchset attempts to do.
A concrete motivating usecase which came up in recent weeks:
A team owns a complex BPF program, with various folks extending its
functionality over the years. An engineer tries to make a relatively
simple addition but encounters "BPF program is too large. Processed
1000001 insn".
Their changes bumped the processed insns from 700k to over the limit and
there's no obvious way to simplify. They must now consider a large
refactor in order to incorporate the new feature. What if there was some
previous change which bumped processed insns from 200k->700k which
_could_ be modified to stress verifier less? Tracking historical
verifier stats for each version of the program over the years would
reduce manual work necessary to find such a change.
Although parsing the text log could work for this scenario, a solution
that's resilient to log format and other verifier changes would be
preferable.
This patchset adds a bpf_prog_verif_stats struct - containing the same
data logged by print_verification_stats - which can be retrieved as part
of bpf_prog_info. Looking for general feedback on approach and a few
specific areas before fleshing it out further:
* None of my usecases require storing verif_stats for the lifetime of a
loaded prog, but adding to bpf_prog_aux felt more correct than trying
to pass verif_stats back as part of BPF_PROG_LOAD
* The verif_stats are probably not generally useful enough to warrant
inclusion in fdinfo, but hoping to get confirmation before removing
that change in patch 1
* processed_insn, verification_time, and total_states are immediately
useful for me, rest were added for parity with
print_verification_stats. Can remove.
* Perhaps a version field would be useful in verif_stats in case future
verifier changes make some current stats meaningless
* Note: stack_depth stat was intentionally skipped to keep patch 1
simple. Will add if approach looks good.
Sorry for the delay. LPC consumes a lot of mental energy :)
I see the value of exposing some of the verification stats as prog_info.
Let's look at the list:
struct bpf_prog_verif_stats {
__u64 verification_time;
__u32 insn_processed;
__u32 max_states_per_insn;
__u32 total_states;
__u32 peak_states;
__u32 longest_mark_read_walk;
};
verification_time is non deterministic. It varies with frequency
and run-to-run. I don't see how alerting tools can use it.
insn_processed is indeed the main verification metric.
By now it's well known and understood.
max_states_per_insn, total_states, etc were the metrics I've studied
carefully with pruning, back tracking and pretty much every significant
change I did or reiviewed in the verifier. They're useful to humans
and developers, but I don't see how alerting tools will use them.
So it feels to me that insn_processed alone will be enough to address the
monitoring goal.
It can be exposed to fd_info and printed by bpftool.
If/when it changes with some future verifier algorithm we should be able
to approximate it.
From: Dave Marchevsky <hidden> Date: 2021-09-24 01:27:27
On 9/23/21 4:51 PM, Alexei Starovoitov wrote:
On Mon, Sep 20, 2021 at 08:11:10AM -0700, Dave Marchevsky wrote:
quoted
The verifier currently logs some useful statistics in
print_verification_stats. Although the text log is an effective feedback
tool for an engineer iterating on a single application, it would also be
useful to enable tracking these stats in a more structured form for
fleetwide or historical analysis, which this patchset attempts to do.
A concrete motivating usecase which came up in recent weeks:
A team owns a complex BPF program, with various folks extending its
functionality over the years. An engineer tries to make a relatively
simple addition but encounters "BPF program is too large. Processed
1000001 insn".
Their changes bumped the processed insns from 700k to over the limit and
there's no obvious way to simplify. They must now consider a large
refactor in order to incorporate the new feature. What if there was some
previous change which bumped processed insns from 200k->700k which
_could_ be modified to stress verifier less? Tracking historical
verifier stats for each version of the program over the years would
reduce manual work necessary to find such a change.
Although parsing the text log could work for this scenario, a solution
that's resilient to log format and other verifier changes would be
preferable.
This patchset adds a bpf_prog_verif_stats struct - containing the same
data logged by print_verification_stats - which can be retrieved as part
of bpf_prog_info. Looking for general feedback on approach and a few
specific areas before fleshing it out further:
* None of my usecases require storing verif_stats for the lifetime of a
loaded prog, but adding to bpf_prog_aux felt more correct than trying
to pass verif_stats back as part of BPF_PROG_LOAD
* The verif_stats are probably not generally useful enough to warrant
inclusion in fdinfo, but hoping to get confirmation before removing
that change in patch 1
* processed_insn, verification_time, and total_states are immediately
useful for me, rest were added for parity with
print_verification_stats. Can remove.
* Perhaps a version field would be useful in verif_stats in case future
verifier changes make some current stats meaningless
* Note: stack_depth stat was intentionally skipped to keep patch 1
simple. Will add if approach looks good.
Sorry for the delay. LPC consumes a lot of mental energy :)
I see the value of exposing some of the verification stats as prog_info.
Let's look at the list:
struct bpf_prog_verif_stats {
__u64 verification_time;
__u32 insn_processed;
__u32 max_states_per_insn;
__u32 total_states;
__u32 peak_states;
__u32 longest_mark_read_walk;
};
verification_time is non deterministic. It varies with frequency
and run-to-run. I don't see how alerting tools can use it.
Makes sense to me, will get rid of it.
insn_processed is indeed the main verification metric.
By now it's well known and understood.
max_states_per_insn, total_states, etc were the metrics I've studied
carefully with pruning, back tracking and pretty much every significant
change I did or reiviewed in the verifier. They're useful to humans
and developers, but I don't see how alerting tools will use them.
So it feels to me that insn_processed alone will be enough to address the
monitoring goal.
For the concrete usecase in my original message insn_processed would be
enough. For the others - I thought there might be value in gathering
those "fleetwide" to inform verifier development, e.g.:
"Hmm, this team's libbpf program has been regressing total_states over
past few {kernel, llvm} rollouts, but they haven't been modifying it.
Let's try to get a minimal repro, send to bpf@vger, and contribute to
selftests if it is indeed hitting a weird verifier edge case"
So for those I'm not expecting them to be useful to alert on or be a
number that the average BPF program writer needs to care about.
Of course this is hypothetical as I haven't tried to gather such data
and look for interesting patterns. But these metrics being useful to
you when looking at significant verifier changes is a good sign.
It can be exposed to fd_info and printed by bpftool.
If/when it changes with some future verifier algorithm we should be able
to approximate it.
On Thu, Sep 23, 2021 at 6:27 PM Dave Marchevsky [off-list ref] wrote:
On 9/23/21 4:51 PM, Alexei Starovoitov wrote:
quoted
On Mon, Sep 20, 2021 at 08:11:10AM -0700, Dave Marchevsky wrote:
quoted
The verifier currently logs some useful statistics in
print_verification_stats. Although the text log is an effective feedback
tool for an engineer iterating on a single application, it would also be
useful to enable tracking these stats in a more structured form for
fleetwide or historical analysis, which this patchset attempts to do.
A concrete motivating usecase which came up in recent weeks:
A team owns a complex BPF program, with various folks extending its
functionality over the years. An engineer tries to make a relatively
simple addition but encounters "BPF program is too large. Processed
1000001 insn".
Their changes bumped the processed insns from 700k to over the limit and
there's no obvious way to simplify. They must now consider a large
refactor in order to incorporate the new feature. What if there was some
previous change which bumped processed insns from 200k->700k which
_could_ be modified to stress verifier less? Tracking historical
verifier stats for each version of the program over the years would
reduce manual work necessary to find such a change.
Although parsing the text log could work for this scenario, a solution
that's resilient to log format and other verifier changes would be
preferable.
This patchset adds a bpf_prog_verif_stats struct - containing the same
data logged by print_verification_stats - which can be retrieved as part
of bpf_prog_info. Looking for general feedback on approach and a few
specific areas before fleshing it out further:
* None of my usecases require storing verif_stats for the lifetime of a
loaded prog, but adding to bpf_prog_aux felt more correct than trying
to pass verif_stats back as part of BPF_PROG_LOAD
* The verif_stats are probably not generally useful enough to warrant
inclusion in fdinfo, but hoping to get confirmation before removing
that change in patch 1
* processed_insn, verification_time, and total_states are immediately
useful for me, rest were added for parity with
print_verification_stats. Can remove.
* Perhaps a version field would be useful in verif_stats in case future
verifier changes make some current stats meaningless
* Note: stack_depth stat was intentionally skipped to keep patch 1
simple. Will add if approach looks good.
Sorry for the delay. LPC consumes a lot of mental energy :)
I see the value of exposing some of the verification stats as prog_info.
Let's look at the list:
struct bpf_prog_verif_stats {
__u64 verification_time;
__u32 insn_processed;
__u32 max_states_per_insn;
__u32 total_states;
__u32 peak_states;
__u32 longest_mark_read_walk;
};
verification_time is non deterministic. It varies with frequency
and run-to-run. I don't see how alerting tools can use it.
Makes sense to me, will get rid of it.
quoted
insn_processed is indeed the main verification metric.
By now it's well known and understood.
max_states_per_insn, total_states, etc were the metrics I've studied
carefully with pruning, back tracking and pretty much every significant
change I did or reiviewed in the verifier. They're useful to humans
and developers, but I don't see how alerting tools will use them.
So it feels to me that insn_processed alone will be enough to address the
monitoring goal.
For the concrete usecase in my original message insn_processed would be
enough. For the others - I thought there might be value in gathering
those "fleetwide" to inform verifier development, e.g.:
"Hmm, this team's libbpf program has been regressing total_states over
past few {kernel, llvm} rollouts, but they haven't been modifying it.
Let's try to get a minimal repro, send to bpf@vger, and contribute to
selftests if it is indeed hitting a weird verifier edge case"
So for those I'm not expecting them to be useful to alert on or be a
number that the average BPF program writer needs to care about.
Of course this is hypothetical as I haven't tried to gather such data
and look for interesting patterns. But these metrics being useful to
you when looking at significant verifier changes is a good sign.
One reason to not add all those fields is to not end up with
meaningless stats (in the future) in UAPI. One way to work around that
is to make it "unstable" by providing it through raw_tracepoint as
internal kernel struct.
Basically, the proposal would be: add new tracepoint for when BPF
program is verified, either successfully or not. As one of the
parameters provide stats struct which is internal to BPF verifier and
is not exposed through UAPI.
Such tracepoint actually would be useful more generally as well, e.g.,
to monitor which programs are verified in the fleet, what's the rate
of success/failure (to detect verifier regression), what are the stats
(verification time actually would be good to have there, again for
stats and detecting regression), etc, etc.
WDYT?
quoted
It can be exposed to fd_info and printed by bpftool.
If/when it changes with some future verifier algorithm we should be able
to approximate it.
From: Dave Marchevsky <hidden> Date: 2021-09-24 18:24:56
On 9/23/21 10:02 PM, Andrii Nakryiko wrote:
On Thu, Sep 23, 2021 at 6:27 PM Dave Marchevsky [off-list ref] wrote:
quoted
On 9/23/21 4:51 PM, Alexei Starovoitov wrote:
quoted
On Mon, Sep 20, 2021 at 08:11:10AM -0700, Dave Marchevsky wrote:
quoted
The verifier currently logs some useful statistics in
print_verification_stats. Although the text log is an effective feedback
tool for an engineer iterating on a single application, it would also be
useful to enable tracking these stats in a more structured form for
fleetwide or historical analysis, which this patchset attempts to do.
A concrete motivating usecase which came up in recent weeks:
A team owns a complex BPF program, with various folks extending its
functionality over the years. An engineer tries to make a relatively
simple addition but encounters "BPF program is too large. Processed
1000001 insn".
Their changes bumped the processed insns from 700k to over the limit and
there's no obvious way to simplify. They must now consider a large
refactor in order to incorporate the new feature. What if there was some
previous change which bumped processed insns from 200k->700k which
_could_ be modified to stress verifier less? Tracking historical
verifier stats for each version of the program over the years would
reduce manual work necessary to find such a change.
Although parsing the text log could work for this scenario, a solution
that's resilient to log format and other verifier changes would be
preferable.
This patchset adds a bpf_prog_verif_stats struct - containing the same
data logged by print_verification_stats - which can be retrieved as part
of bpf_prog_info. Looking for general feedback on approach and a few
specific areas before fleshing it out further:
* None of my usecases require storing verif_stats for the lifetime of a
loaded prog, but adding to bpf_prog_aux felt more correct than trying
to pass verif_stats back as part of BPF_PROG_LOAD
* The verif_stats are probably not generally useful enough to warrant
inclusion in fdinfo, but hoping to get confirmation before removing
that change in patch 1
* processed_insn, verification_time, and total_states are immediately
useful for me, rest were added for parity with
print_verification_stats. Can remove.
* Perhaps a version field would be useful in verif_stats in case future
verifier changes make some current stats meaningless
* Note: stack_depth stat was intentionally skipped to keep patch 1
simple. Will add if approach looks good.
Sorry for the delay. LPC consumes a lot of mental energy :)
I see the value of exposing some of the verification stats as prog_info.
Let's look at the list:
struct bpf_prog_verif_stats {
__u64 verification_time;
__u32 insn_processed;
__u32 max_states_per_insn;
__u32 total_states;
__u32 peak_states;
__u32 longest_mark_read_walk;
};
verification_time is non deterministic. It varies with frequency
and run-to-run. I don't see how alerting tools can use it.
Makes sense to me, will get rid of it.
quoted
insn_processed is indeed the main verification metric.
By now it's well known and understood.
max_states_per_insn, total_states, etc were the metrics I've studied
carefully with pruning, back tracking and pretty much every significant
change I did or reiviewed in the verifier. They're useful to humans
and developers, but I don't see how alerting tools will use them.
So it feels to me that insn_processed alone will be enough to address the
monitoring goal.
For the concrete usecase in my original message insn_processed would be
enough. For the others - I thought there might be value in gathering
those "fleetwide" to inform verifier development, e.g.:
"Hmm, this team's libbpf program has been regressing total_states over
past few {kernel, llvm} rollouts, but they haven't been modifying it.
Let's try to get a minimal repro, send to bpf@vger, and contribute to
selftests if it is indeed hitting a weird verifier edge case"
So for those I'm not expecting them to be useful to alert on or be a
number that the average BPF program writer needs to care about.
Of course this is hypothetical as I haven't tried to gather such data
and look for interesting patterns. But these metrics being useful to
you when looking at significant verifier changes is a good sign.
One reason to not add all those fields is to not end up with
meaningless stats (in the future) in UAPI. One way to work around that
is to make it "unstable" by providing it through raw_tracepoint as
internal kernel struct.
Basically, the proposal would be: add new tracepoint for when BPF
program is verified, either successfully or not. As one of the
parameters provide stats struct which is internal to BPF verifier and
is not exposed through UAPI.
Such tracepoint actually would be useful more generally as well, e.g.,
to monitor which programs are verified in the fleet, what's the rate
of success/failure (to detect verifier regression), what are the stats
(verification time actually would be good to have there, again for
stats and detecting regression), etc, etc.
WDYT?
Seems reasonable to me - and attaching a BPF program to the tracepoint to
grab data is delightfully meta :)
I'll do a pass on alternate implementation with _just_ tracepoint, no
prog_info or fdinfo, can add minimal or full stats to those later if
necessary.
quoted
quoted
It can be exposed to fd_info and printed by bpftool.
If/when it changes with some future verifier algorithm we should be able
to approximate it.
From: John Fastabend <john.fastabend@gmail.com> Date: 2021-09-27 18:20:29
Dave Marchevsky wrote:
On 9/23/21 10:02 PM, Andrii Nakryiko wrote:
quoted
On Thu, Sep 23, 2021 at 6:27 PM Dave Marchevsky [off-list ref] wrote:
quoted
On 9/23/21 4:51 PM, Alexei Starovoitov wrote:
quoted
On Mon, Sep 20, 2021 at 08:11:10AM -0700, Dave Marchevsky wrote:
quoted
The verifier currently logs some useful statistics in
print_verification_stats. Although the text log is an effective feedback
tool for an engineer iterating on a single application, it would also be
useful to enable tracking these stats in a more structured form for
fleetwide or historical analysis, which this patchset attempts to do.
A concrete motivating usecase which came up in recent weeks:
A team owns a complex BPF program, with various folks extending its
functionality over the years. An engineer tries to make a relatively
simple addition but encounters "BPF program is too large. Processed
1000001 insn".
Their changes bumped the processed insns from 700k to over the limit and
there's no obvious way to simplify. They must now consider a large
refactor in order to incorporate the new feature. What if there was some
previous change which bumped processed insns from 200k->700k which
_could_ be modified to stress verifier less? Tracking historical
verifier stats for each version of the program over the years would
reduce manual work necessary to find such a change.
Although parsing the text log could work for this scenario, a solution
that's resilient to log format and other verifier changes would be
preferable.
This patchset adds a bpf_prog_verif_stats struct - containing the same
data logged by print_verification_stats - which can be retrieved as part
of bpf_prog_info. Looking for general feedback on approach and a few
specific areas before fleshing it out further:
* None of my usecases require storing verif_stats for the lifetime of a
loaded prog, but adding to bpf_prog_aux felt more correct than trying
to pass verif_stats back as part of BPF_PROG_LOAD
* The verif_stats are probably not generally useful enough to warrant
inclusion in fdinfo, but hoping to get confirmation before removing
that change in patch 1
* processed_insn, verification_time, and total_states are immediately
useful for me, rest were added for parity with
print_verification_stats. Can remove.
* Perhaps a version field would be useful in verif_stats in case future
verifier changes make some current stats meaningless
* Note: stack_depth stat was intentionally skipped to keep patch 1
simple. Will add if approach looks good.
Sorry for the delay. LPC consumes a lot of mental energy :)
I see the value of exposing some of the verification stats as prog_info.
Let's look at the list:
struct bpf_prog_verif_stats {
__u64 verification_time;
__u32 insn_processed;
__u32 max_states_per_insn;
__u32 total_states;
__u32 peak_states;
__u32 longest_mark_read_walk;
};
verification_time is non deterministic. It varies with frequency
and run-to-run. I don't see how alerting tools can use it.
Makes sense to me, will get rid of it.
quoted
insn_processed is indeed the main verification metric.
By now it's well known and understood.
max_states_per_insn, total_states, etc were the metrics I've studied
carefully with pruning, back tracking and pretty much every significant
change I did or reiviewed in the verifier. They're useful to humans
and developers, but I don't see how alerting tools will use them.
So it feels to me that insn_processed alone will be enough to address the
monitoring goal.
For the concrete usecase in my original message insn_processed would be
enough. For the others - I thought there might be value in gathering
those "fleetwide" to inform verifier development, e.g.:
"Hmm, this team's libbpf program has been regressing total_states over
past few {kernel, llvm} rollouts, but they haven't been modifying it.
Let's try to get a minimal repro, send to bpf@vger, and contribute to
selftests if it is indeed hitting a weird verifier edge case"
So for those I'm not expecting them to be useful to alert on or be a
number that the average BPF program writer needs to care about.
Of course this is hypothetical as I haven't tried to gather such data
and look for interesting patterns. But these metrics being useful to
you when looking at significant verifier changes is a good sign.
One reason to not add all those fields is to not end up with
meaningless stats (in the future) in UAPI. One way to work around that
is to make it "unstable" by providing it through raw_tracepoint as
internal kernel struct.
Basically, the proposal would be: add new tracepoint for when BPF
program is verified, either successfully or not. As one of the
parameters provide stats struct which is internal to BPF verifier and
is not exposed through UAPI.
Such tracepoint actually would be useful more generally as well, e.g.,
to monitor which programs are verified in the fleet, what's the rate
of success/failure (to detect verifier regression), what are the stats
(verification time actually would be good to have there, again for
stats and detecting regression), etc, etc.
WDYT?
Seems reasonable to me - and attaching a BPF program to the tracepoint to
grab data is delightfully meta :)
I'll do a pass on alternate implementation with _just_ tracepoint, no
prog_info or fdinfo, can add minimal or full stats to those later if
necessary.
We can also use a hook point here to enforce policy on allowing the
BPF program to load or not using the stats here. For now basic
insn is a good start to allow larger/smaller programs to be loaded,
but we might add other info like call bitmask, features, types, etc.
If one of the arguments is the bpf_attr struct we can just read
lots of useful program info out directly.
We would need something different from a tracepoint though to let
it return a reject|accept code. How about a new hook type that
has something similar to sockops that lets us just return an
accept or reject code?
By doing this we can check loader signatures here to be sure the
loader is signed or otherwise has correct permissions to be loading
whatever type of bpf program is here.
Thanks,
John
On Mon, Sep 27, 2021 at 11:20 AM John Fastabend
[off-list ref] wrote:
Dave Marchevsky wrote:
quoted
On 9/23/21 10:02 PM, Andrii Nakryiko wrote:
quoted
On Thu, Sep 23, 2021 at 6:27 PM Dave Marchevsky [off-list ref] wrote:
quoted
On 9/23/21 4:51 PM, Alexei Starovoitov wrote:
quoted
On Mon, Sep 20, 2021 at 08:11:10AM -0700, Dave Marchevsky wrote:
quoted
The verifier currently logs some useful statistics in
print_verification_stats. Although the text log is an effective feedback
tool for an engineer iterating on a single application, it would also be
useful to enable tracking these stats in a more structured form for
fleetwide or historical analysis, which this patchset attempts to do.
A concrete motivating usecase which came up in recent weeks:
A team owns a complex BPF program, with various folks extending its
functionality over the years. An engineer tries to make a relatively
simple addition but encounters "BPF program is too large. Processed
1000001 insn".
Their changes bumped the processed insns from 700k to over the limit and
there's no obvious way to simplify. They must now consider a large
refactor in order to incorporate the new feature. What if there was some
previous change which bumped processed insns from 200k->700k which
_could_ be modified to stress verifier less? Tracking historical
verifier stats for each version of the program over the years would
reduce manual work necessary to find such a change.
Although parsing the text log could work for this scenario, a solution
that's resilient to log format and other verifier changes would be
preferable.
This patchset adds a bpf_prog_verif_stats struct - containing the same
data logged by print_verification_stats - which can be retrieved as part
of bpf_prog_info. Looking for general feedback on approach and a few
specific areas before fleshing it out further:
* None of my usecases require storing verif_stats for the lifetime of a
loaded prog, but adding to bpf_prog_aux felt more correct than trying
to pass verif_stats back as part of BPF_PROG_LOAD
* The verif_stats are probably not generally useful enough to warrant
inclusion in fdinfo, but hoping to get confirmation before removing
that change in patch 1
* processed_insn, verification_time, and total_states are immediately
useful for me, rest were added for parity with
print_verification_stats. Can remove.
* Perhaps a version field would be useful in verif_stats in case future
verifier changes make some current stats meaningless
* Note: stack_depth stat was intentionally skipped to keep patch 1
simple. Will add if approach looks good.
Sorry for the delay. LPC consumes a lot of mental energy :)
I see the value of exposing some of the verification stats as prog_info.
Let's look at the list:
struct bpf_prog_verif_stats {
__u64 verification_time;
__u32 insn_processed;
__u32 max_states_per_insn;
__u32 total_states;
__u32 peak_states;
__u32 longest_mark_read_walk;
};
verification_time is non deterministic. It varies with frequency
and run-to-run. I don't see how alerting tools can use it.
Makes sense to me, will get rid of it.
quoted
insn_processed is indeed the main verification metric.
By now it's well known and understood.
max_states_per_insn, total_states, etc were the metrics I've studied
carefully with pruning, back tracking and pretty much every significant
change I did or reiviewed in the verifier. They're useful to humans
and developers, but I don't see how alerting tools will use them.
So it feels to me that insn_processed alone will be enough to address the
monitoring goal.
For the concrete usecase in my original message insn_processed would be
enough. For the others - I thought there might be value in gathering
those "fleetwide" to inform verifier development, e.g.:
"Hmm, this team's libbpf program has been regressing total_states over
past few {kernel, llvm} rollouts, but they haven't been modifying it.
Let's try to get a minimal repro, send to bpf@vger, and contribute to
selftests if it is indeed hitting a weird verifier edge case"
So for those I'm not expecting them to be useful to alert on or be a
number that the average BPF program writer needs to care about.
Of course this is hypothetical as I haven't tried to gather such data
and look for interesting patterns. But these metrics being useful to
you when looking at significant verifier changes is a good sign.
One reason to not add all those fields is to not end up with
meaningless stats (in the future) in UAPI. One way to work around that
is to make it "unstable" by providing it through raw_tracepoint as
internal kernel struct.
Basically, the proposal would be: add new tracepoint for when BPF
program is verified, either successfully or not. As one of the
parameters provide stats struct which is internal to BPF verifier and
is not exposed through UAPI.
Such tracepoint actually would be useful more generally as well, e.g.,
to monitor which programs are verified in the fleet, what's the rate
of success/failure (to detect verifier regression), what are the stats
(verification time actually would be good to have there, again for
stats and detecting regression), etc, etc.
WDYT?
Seems reasonable to me - and attaching a BPF program to the tracepoint to
grab data is delightfully meta :)
I'll do a pass on alternate implementation with _just_ tracepoint, no
prog_info or fdinfo, can add minimal or full stats to those later if
necessary.
We can also use a hook point here to enforce policy on allowing the
BPF program to load or not using the stats here. For now basic
insn is a good start to allow larger/smaller programs to be loaded,
but we might add other info like call bitmask, features, types, etc.
If one of the arguments is the bpf_attr struct we can just read
lots of useful program info out directly.
We would need something different from a tracepoint though to let
it return a reject|accept code. How about a new hook type that
has something similar to sockops that lets us just return an
accept or reject code?
By doing this we can check loader signatures here to be sure the
loader is signed or otherwise has correct permissions to be loading
whatever type of bpf program is here.
For signing and generally preventing some BPF programs from loading
(e.g., if there is some malicious BPF program that takes tons of
memory to be validated), wouldn't you want to check that before BPF
verifier spent all those resources on verification? So maybe there
will be another hook before BPF prog is validated for that? Basically,
if you don't trust any BPF program unless it is signed, I'd expect you
check signature before BPF verifier does its heavy job.
From: John Fastabend <john.fastabend@gmail.com> Date: 2021-09-28 01:33:56
Andrii Nakryiko wrote:
On Mon, Sep 27, 2021 at 11:20 AM John Fastabend
[off-list ref] wrote:
quoted
Dave Marchevsky wrote:
quoted
On 9/23/21 10:02 PM, Andrii Nakryiko wrote:
quoted
On Thu, Sep 23, 2021 at 6:27 PM Dave Marchevsky [off-list ref] wrote:
quoted
On 9/23/21 4:51 PM, Alexei Starovoitov wrote:
quoted
On Mon, Sep 20, 2021 at 08:11:10AM -0700, Dave Marchevsky wrote:
quoted
The verifier currently logs some useful statistics in
print_verification_stats. Although the text log is an effective feedback
tool for an engineer iterating on a single application, it would also be
useful to enable tracking these stats in a more structured form for
fleetwide or historical analysis, which this patchset attempts to do.
[...]
quoted
quoted
Seems reasonable to me - and attaching a BPF program to the tracepoint to
grab data is delightfully meta :)
I'll do a pass on alternate implementation with _just_ tracepoint, no
prog_info or fdinfo, can add minimal or full stats to those later if
necessary.
We can also use a hook point here to enforce policy on allowing the
BPF program to load or not using the stats here. For now basic
insn is a good start to allow larger/smaller programs to be loaded,
but we might add other info like call bitmask, features, types, etc.
If one of the arguments is the bpf_attr struct we can just read
lots of useful program info out directly.
We would need something different from a tracepoint though to let
it return a reject|accept code. How about a new hook type that
has something similar to sockops that lets us just return an
accept or reject code?
By doing this we can check loader signatures here to be sure the
loader is signed or otherwise has correct permissions to be loading
whatever type of bpf program is here.
For signing and generally preventing some BPF programs from loading
(e.g., if there is some malicious BPF program that takes tons of
memory to be validated), wouldn't you want to check that before BPF
verifier spent all those resources on verification? So maybe there
will be another hook before BPF prog is validated for that? Basically,
if you don't trust any BPF program unless it is signed, I'd expect you
check signature before BPF verifier does its heavy job.
Agree, for basic sig check or anything that just wants to look at
the task_struct storage for some attributes before we verify is
more efficient. The only reason I suggested after is if we wanted
to start auditing/enforcing on calls or map read/writes, etc. these
we would need the verifier to help tabulate.
When I hacked it in for experimenting I put the hook in the sys
bpf load path before the verifier runs. That seemed to work for
the simpler sig check cases I was running.
OTOH though if we have a system with lots of BPF failed loads this
would indicate a more serious problem that an admin should fix
so might be nicer code-wise to just have a single hook after verifier
vs optimizing to two one in front and one after.
From: Dave Marchevsky <hidden> Date: 2021-10-07 09:07:03
On 9/27/21 9:33 PM, John Fastabend wrote:
Andrii Nakryiko wrote:
quoted
On Mon, Sep 27, 2021 at 11:20 AM John Fastabend
[off-list ref] wrote:
quoted
Dave Marchevsky wrote:
quoted
On 9/23/21 10:02 PM, Andrii Nakryiko wrote:
quoted
On Thu, Sep 23, 2021 at 6:27 PM Dave Marchevsky [off-list ref] wrote:
quoted
On 9/23/21 4:51 PM, Alexei Starovoitov wrote:
quoted
On Mon, Sep 20, 2021 at 08:11:10AM -0700, Dave Marchevsky wrote:
quoted
The verifier currently logs some useful statistics in
print_verification_stats. Although the text log is an effective feedback
tool for an engineer iterating on a single application, it would also be
useful to enable tracking these stats in a more structured form for
fleetwide or historical analysis, which this patchset attempts to do.
[...]
quoted
quoted
quoted
Seems reasonable to me - and attaching a BPF program to the tracepoint to
grab data is delightfully meta :)
I'll do a pass on alternate implementation with _just_ tracepoint, no
prog_info or fdinfo, can add minimal or full stats to those later if
necessary.
Actually I ended up pushing a simple add of insn_processed to prog_info,
fdinfo instead of bare tracepoint. The more general discussion here is
interesting - if we can inject some custom logic into various points in
verification process, can gather arbitrary stats or make policy decisions
from the same attach points.
quoted
quoted
We can also use a hook point here to enforce policy on allowing the
BPF program to load or not using the stats here. For now basic
insn is a good start to allow larger/smaller programs to be loaded,
but we might add other info like call bitmask, features, types, etc.
If one of the arguments is the bpf_attr struct we can just read
lots of useful program info out directly.
We would need something different from a tracepoint though to let
it return a reject|accept code. How about a new hook type that
has something similar to sockops that lets us just return an
accept or reject code?
By doing this we can check loader signatures here to be sure the
loader is signed or otherwise has correct permissions to be loading
whatever type of bpf program is here.
For signing and generally preventing some BPF programs from loading
(e.g., if there is some malicious BPF program that takes tons of
memory to be validated), wouldn't you want to check that before BPF
verifier spent all those resources on verification? So maybe there
will be another hook before BPF prog is validated for that? Basically,
if you don't trust any BPF program unless it is signed, I'd expect you
check signature before BPF verifier does its heavy job.
Agree, for basic sig check or anything that just wants to look at
the task_struct storage for some attributes before we verify is
more efficient. The only reason I suggested after is if we wanted
to start auditing/enforcing on calls or map read/writes, etc. these
we would need the verifier to help tabulate.
This is the "Bob isn't signed, so ensure that Bob can only read from
Alice's maps" case from your recent talk, right?
I'd like to add another illustrative usecase: "progs of type X can
use 4k of stack, while type Y can only use 128 bytes of stack". For
the 4k case, a single attach point after verification is complete
wouldn't work as the prog would've been eagerly rejected.
Alexei suggested adding some empty noinline functions with
ALLOW_ERROR_INJECTION at potential attach points, then attaching
BPF_MODIFY_RETURN progs to inject custom logic. This would allow
arbitrarily digging around while optionally affecting return result.
WDYT?
When I hacked it in for experimenting I put the hook in the sys
bpf load path before the verifier runs. That seemed to work for
the simpler sig check cases I was running.
OTOH though if we have a system with lots of BPF failed loads this
would indicate a more serious problem that an admin should fix
so might be nicer code-wise to just have a single hook after verifier
vs optimizing to two one in front and one after.
From: John Fastabend <john.fastabend@gmail.com> Date: 2021-10-08 15:50:50
Dave Marchevsky wrote:
On 9/27/21 9:33 PM, John Fastabend wrote:
quoted
Andrii Nakryiko wrote:
quoted
On Mon, Sep 27, 2021 at 11:20 AM John Fastabend
[off-list ref] wrote:
quoted
Dave Marchevsky wrote:
quoted
On 9/23/21 10:02 PM, Andrii Nakryiko wrote:
quoted
On Thu, Sep 23, 2021 at 6:27 PM Dave Marchevsky [off-list ref] wrote:
quoted
On 9/23/21 4:51 PM, Alexei Starovoitov wrote:
quoted
On Mon, Sep 20, 2021 at 08:11:10AM -0700, Dave Marchevsky wrote:
quoted
The verifier currently logs some useful statistics in
print_verification_stats. Although the text log is an effective feedback
tool for an engineer iterating on a single application, it would also be
useful to enable tracking these stats in a more structured form for
fleetwide or historical analysis, which this patchset attempts to do.
[...]
quoted
quoted
quoted
Seems reasonable to me - and attaching a BPF program to the tracepoint to
grab data is delightfully meta :)
I'll do a pass on alternate implementation with _just_ tracepoint, no
prog_info or fdinfo, can add minimal or full stats to those later if
necessary.
Actually I ended up pushing a simple add of insn_processed to prog_info,
fdinfo instead of bare tracepoint. The more general discussion here is
interesting - if we can inject some custom logic into various points in
verification process, can gather arbitrary stats or make policy decisions
from the same attach points.
quoted
quoted
quoted
We can also use a hook point here to enforce policy on allowing the
BPF program to load or not using the stats here. For now basic
insn is a good start to allow larger/smaller programs to be loaded,
but we might add other info like call bitmask, features, types, etc.
If one of the arguments is the bpf_attr struct we can just read
lots of useful program info out directly.
We would need something different from a tracepoint though to let
it return a reject|accept code. How about a new hook type that
has something similar to sockops that lets us just return an
accept or reject code?
By doing this we can check loader signatures here to be sure the
loader is signed or otherwise has correct permissions to be loading
whatever type of bpf program is here.
For signing and generally preventing some BPF programs from loading
(e.g., if there is some malicious BPF program that takes tons of
memory to be validated), wouldn't you want to check that before BPF
verifier spent all those resources on verification? So maybe there
will be another hook before BPF prog is validated for that? Basically,
if you don't trust any BPF program unless it is signed, I'd expect you
check signature before BPF verifier does its heavy job.
Agree, for basic sig check or anything that just wants to look at
the task_struct storage for some attributes before we verify is
more efficient. The only reason I suggested after is if we wanted
to start auditing/enforcing on calls or map read/writes, etc. these
we would need the verifier to help tabulate.
This is the "Bob isn't signed, so ensure that Bob can only read from
Alice's maps" case from your recent talk, right?
Correct.
I'd like to add another illustrative usecase: "progs of type X can
use 4k of stack, while type Y can only use 128 bytes of stack". For
the 4k case, a single attach point after verification is complete
wouldn't work as the prog would've been eagerly rejected.
Makes sense. Another use case would be to allow more tailcalls. 32 has
become limiting for some of our use cases where we have relatively small
insn counts, but tail calls >32 may happen. If we bumped this to
128 for example we might want to only allow specific prog types to
allow it.
Alexei suggested adding some empty noinline functions with
ALLOW_ERROR_INJECTION at potential attach points, then attaching
BPF_MODIFY_RETURN progs to inject custom logic. This would allow
arbitrarily digging around while optionally affecting return result.
WDYT?
That is exactly what I had in mind as well. And what I did to get
the example to work in the talk.
Also we would want a few other of these non-inline verdict locations
as well mostly to avoid having to setup a full LSM environment when we
just want some simple BPF verdict actions at key hooks and/or to
trigger our CI on some edge cases that are tricky to hit by luck.
quoted
When I hacked it in for experimenting I put the hook in the sys
bpf load path before the verifier runs. That seemed to work for
the simpler sig check cases I was running.
OTOH though if we have a system with lots of BPF failed loads this
would indicate a more serious problem that an admin should fix
so might be nicer code-wise to just have a single hook after verifier
vs optimizing to two one in front and one after.