# Re: \[PATCH v10 10/17\] virtio: Handle device reset failure in register\_virtio\_device()

- From: Jason Wang \<hidden\>
- Date: 2021-08-03 08:09:47 
- List: netdev
- Page: https://ratatoskr.run/netdev/2021/08/211504
- Thread: https://ratatoskr.run/netdev/2021/07/211212/t.md

```text

在 2021/7/29 下午3:34, Xie Yongji 写道:
> The device reset may fail in virtio-vdpa case now, so add checks to
> its return value and fail the register_virtio_device().


So the reset() would be called by the driver during remove as well, or is it sufficient to deal only with the reset during probe?

Thanks


>
> Signed-off-by: Xie Yongji <redacted>
> ---
>   drivers/virtio/virtio.c | 15 ++++++++++-----
>   1 file changed, 10 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
> index a15beb6b593b..8df75425fb43 100644
> --- a/drivers/virtio/virtio.c
> +++ b/drivers/virtio/virtio.c
> @@ -349,7 +349,9 @@ int register_virtio_device(struct virtio_device *dev)
>   
>   	/* We always start by resetting the device, in case a previous
>   	 * driver messed it up.  This also tests that code path a little. */
> -	dev->config->reset(dev);
> +	err = dev->config->reset(dev);
> +	if (err)
> +		goto err_reset;
>   
>   	/* Acknowledge that we've seen the device. */
>   	virtio_add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE);
> @@ -362,10 +364,13 @@ int register_virtio_device(struct virtio_device *dev)
>   	 */
>   	err = device_add(&dev->dev);
>   	if (err)
> -		ida_simple_remove(&virtio_index_ida, dev->index);
> -out:
> -	if (err)
> -		virtio_add_status(dev, VIRTIO_CONFIG_S_FAILED);
> +		goto err_add;
> +
> +	return 0;
> +err_add:
> +	virtio_add_status(dev, VIRTIO_CONFIG_S_FAILED);
> +err_reset:
> +	ida_simple_remove(&virtio_index_ida, dev->index);
>   	return err;
>   }
>   EXPORT_SYMBOL_GPL(register_virtio_device);

```
