[PATCH net-next 1/1] net: phy: marvell: Add WAKE_PHY support to WOL event

Subsystems: ethernet phy library, networking drivers, the rest

STALE1839d

4 messages, 4 authors, 2021-08-16 · open the first message on its own page

[PATCH net-next 1/1] net: phy: marvell: Add WAKE_PHY support to WOL event

From: Song Yoong Siang <hidden>
Date: 2021-08-13 08:52:08 

Add Wake-on-PHY feature support by enabling the Link Up Event.

Signed-off-by: Song Yoong Siang <redacted>
---
 drivers/net/phy/marvell.c | 39 ++++++++++++++++++++++++++++++++++++---
 1 file changed, 36 insertions(+), 3 deletions(-)

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 3de93c9f2744..415e2a01c151 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -155,6 +155,7 @@
 
 #define MII_88E1318S_PHY_WOL_CTRL				0x10
 #define MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS		BIT(12)
+#define MII_88E1318S_PHY_WOL_CTRL_LINK_UP_ENABLE		BIT(13)
 #define MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE	BIT(14)
 
 #define MII_PHY_LED_CTRL	        16
@@ -1746,13 +1747,19 @@ static void m88e1318_get_wol(struct phy_device *phydev,
 {
 	int ret;
 
-	wol->supported = WAKE_MAGIC;
+	wol->supported = WAKE_MAGIC | WAKE_PHY;
 	wol->wolopts = 0;
 
 	ret = phy_read_paged(phydev, MII_MARVELL_WOL_PAGE,
 			     MII_88E1318S_PHY_WOL_CTRL);
-	if (ret >= 0 && ret & MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE)
+	if (ret < 0)
+		return;
+
+	if (ret & MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE)
 		wol->wolopts |= WAKE_MAGIC;
+
+	if (ret & MII_88E1318S_PHY_WOL_CTRL_LINK_UP_ENABLE)
+		wol->wolopts |= WAKE_PHY;
 }
 
 static int m88e1318_set_wol(struct phy_device *phydev,
@@ -1764,7 +1771,7 @@ static int m88e1318_set_wol(struct phy_device *phydev,
 	if (oldpage < 0)
 		goto error;
 
-	if (wol->wolopts & WAKE_MAGIC) {
+	if (wol->wolopts & (WAKE_MAGIC | WAKE_PHY)) {
 		/* Explicitly switch to page 0x00, just to be sure */
 		err = marvell_write_page(phydev, MII_MARVELL_COPPER_PAGE);
 		if (err < 0)
@@ -1796,7 +1803,9 @@ static int m88e1318_set_wol(struct phy_device *phydev,
 				   MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW);
 		if (err < 0)
 			goto error;
+	}
 
+	if (wol->wolopts & WAKE_MAGIC) {
 		err = marvell_write_page(phydev, MII_MARVELL_WOL_PAGE);
 		if (err < 0)
 			goto error;
@@ -1837,6 +1846,30 @@ static int m88e1318_set_wol(struct phy_device *phydev,
 			goto error;
 	}
 
+	if (wol->wolopts & WAKE_PHY) {
+		err = marvell_write_page(phydev, MII_MARVELL_WOL_PAGE);
+		if (err < 0)
+			goto error;
+
+		/* Clear WOL status and enable link up event */
+		err = __phy_modify(phydev, MII_88E1318S_PHY_WOL_CTRL, 0,
+				   MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS |
+				   MII_88E1318S_PHY_WOL_CTRL_LINK_UP_ENABLE);
+		if (err < 0)
+			goto error;
+	} else {
+		err = marvell_write_page(phydev, MII_MARVELL_WOL_PAGE);
+		if (err < 0)
+			goto error;
+
+		/* Clear WOL status and disable link up event */
+		err = __phy_modify(phydev, MII_88E1318S_PHY_WOL_CTRL,
+				   MII_88E1318S_PHY_WOL_CTRL_LINK_UP_ENABLE,
+				   MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS);
+		if (err < 0)
+			goto error;
+	}
+
 error:
 	return phy_restore_page(phydev, oldpage, err);
 }
-- 
2.25.1

Re: [PATCH net-next 1/1] net: phy: marvell: Add WAKE_PHY support to WOL event

From: Andrew Lunn <andrew@lunn.ch>
Date: 2021-08-14 16:08:46 

On Fri, Aug 13, 2021 at 04:45:08PM +0800, Song Yoong Siang wrote:
Add Wake-on-PHY feature support by enabling the Link Up Event.

Signed-off-by: Song Yoong Siang <redacted>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

Re: [PATCH net-next 1/1] net: phy: marvell: Add WAKE_PHY support to WOL event

From: patchwork-bot+netdevbpf@kernel.org
Date: 2021-08-16 10:10:22 

Hello:

This patch was applied to netdev/net-next.git (refs/heads/master):

On Fri, 13 Aug 2021 16:45:08 +0800 you wrote:
Add Wake-on-PHY feature support by enabling the Link Up Event.

Signed-off-by: Song Yoong Siang <redacted>
---
 drivers/net/phy/marvell.c | 39 ++++++++++++++++++++++++++++++++++++---
 1 file changed, 36 insertions(+), 3 deletions(-)
Here is the summary with links:
  - [net-next,1/1] net: phy: marvell: Add WAKE_PHY support to WOL event
    https://git.kernel.org/netdev/net-next/c/6164659ff7ac

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

Re: [PATCH net-next 1/1] net: phy: marvell: Add WAKE_PHY support to WOL event

From: "Russell King (Oracle)" <linux@armlinux.org.uk>
Date: 2021-08-16 10:11:08 

On Fri, Aug 13, 2021 at 04:45:08PM +0800, Song Yoong Siang wrote:
Add Wake-on-PHY feature support by enabling the Link Up Event.

Signed-off-by: Song Yoong Siang <redacted>
Hi,

I think this can be greatly simplified - see below.
quoted hunk
---
 drivers/net/phy/marvell.c | 39 ++++++++++++++++++++++++++++++++++++---
 1 file changed, 36 insertions(+), 3 deletions(-)

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 3de93c9f2744..415e2a01c151 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -155,6 +155,7 @@
 
 #define MII_88E1318S_PHY_WOL_CTRL				0x10
 #define MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS		BIT(12)
+#define MII_88E1318S_PHY_WOL_CTRL_LINK_UP_ENABLE		BIT(13)
 #define MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE	BIT(14)
 
 #define MII_PHY_LED_CTRL	        16
@@ -1746,13 +1747,19 @@ static void m88e1318_get_wol(struct phy_device *phydev,
 {
 	int ret;
 
-	wol->supported = WAKE_MAGIC;
+	wol->supported = WAKE_MAGIC | WAKE_PHY;
 	wol->wolopts = 0;
 
 	ret = phy_read_paged(phydev, MII_MARVELL_WOL_PAGE,
 			     MII_88E1318S_PHY_WOL_CTRL);
-	if (ret >= 0 && ret & MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE)
+	if (ret < 0)
+		return;
+
+	if (ret & MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE)
 		wol->wolopts |= WAKE_MAGIC;
+
+	if (ret & MII_88E1318S_PHY_WOL_CTRL_LINK_UP_ENABLE)
+		wol->wolopts |= WAKE_PHY;
 }
 
 static int m88e1318_set_wol(struct phy_device *phydev,
@@ -1764,7 +1771,7 @@ static int m88e1318_set_wol(struct phy_device *phydev,
 	if (oldpage < 0)
 		goto error;
 
-	if (wol->wolopts & WAKE_MAGIC) {
+	if (wol->wolopts & (WAKE_MAGIC | WAKE_PHY)) {
 		/* Explicitly switch to page 0x00, just to be sure */
 		err = marvell_write_page(phydev, MII_MARVELL_COPPER_PAGE);
 		if (err < 0)
@@ -1796,7 +1803,9 @@ static int m88e1318_set_wol(struct phy_device *phydev,
 				   MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW);
 		if (err < 0)
 			goto error;
+	}
Wouldn't it make more sense to always select the WOL page at this point
between these two blocks? From what I can see, the WOL page is selected
by both true and false blocks of the next if() statement, and again by
the newly added if() statement for WAKE_PHY.

Other than that, I don't see any issues.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help