[PATCH] dt-bindings: net: Add the properties for ipq4019 MDIO

The new added properties resource "reg" is for configuring
ethernet LDO in the IPQ5018 chipset, the property "clocks"
is for configuring the MDIO clock source frequency.

This patch depends on the following patch:
Commit 2b8951cb4670 ("net: mdio: Add the reset function for IPQ MDIO
driver")

Signed-off-by: Luo Jie <redacted>
---
 .../devicetree/bindings/net/qcom,ipq4019-mdio.yaml | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml b/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
index 0c973310ada0..8f53fa2a00f8 100644
--- a/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ipq4019-mdio.yaml

@@ -14,7 +14,9 @@ allOf:
 
 properties:
   compatible:
-    const: qcom,ipq4019-mdio
+    enum:
+      - qcom,ipq4019-mdio
+      - qcom,ipq5018-mdio
 
   "#address-cells":
     const: 1

@@ -23,7 +25,15 @@ properties:
     const: 0
 
   reg:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
+    description:
+      the first Address and length of the register set for the MDIO controller.
+      the optional second Address and length of the register for ethernet LDO.
+
+  clocks:
+    items:
+      - description: MDIO clock
 
 required:
   - compatible

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

On Sun, Aug 08, 2021 at 03:53:28PM +0800, Luo Jie wrote:

The new added properties resource "reg" is for configuring
ethernet LDO in the IPQ5018 chipset, the property "clocks"
is for configuring the MDIO clock source frequency.

This patch depends on the following patch:
Commit 2b8951cb4670 ("net: mdio: Add the reset function for IPQ MDIO
driver")

Please always make binding patches part of the series containing the
driver code. We sometimes need to see both to do a proper review.

Add a comment about when the second address range and clock is
required. Does qcom,ipq5018-mdio require them?

	  Andrew

On 8/8/2021 11:47 PM, Andrew Lunn wrote:

On Sun, Aug 08, 2021 at 03:53:28PM +0800, Luo Jie wrote:

quoted

The new added properties resource "reg" is for configuring
ethernet LDO in the IPQ5018 chipset, the property "clocks"
is for configuring the MDIO clock source frequency.

This patch depends on the following patch:
Commit 2b8951cb4670 ("net: mdio: Add the reset function for IPQ MDIO
driver")

Please always make binding patches part of the series containing the
driver code. We sometimes need to see both to do a proper review.

Add a comment about when the second address range and clock is
required. Does qcom,ipq5018-mdio require them?

	  Andrew

Hi Andrew,

yes, the second address range is only required for qcom,ipq5018-mdio 
currently,

will document it in next patch set, and send it with the drive code 
patch, thanks

for the comments and review.