# \[PATCH net-next 0/8\] dpaa2-switch: integrate the MAC endpoint support

- From: Ioana Ciornei \<hidden\>
- Date: 2021-08-03 17:01:15 
- List: netdev
- Page: https://ratatoskr.run/netdev/2021/08/11208548
- Thread: https://ratatoskr.run/netdev/2021/08/11208548/t.md

```text
From: Ioana Ciornei <ioana.ciornei@nxp.com>

This patch set integrates the already available MAC support into the
dpaa2-switch driver as well.

The first 4 patches are fixing up some minor problems or optimizing the
code, while the remaining ones are actually integrating the dpaa2-mac
support into the switch driver by calling the dpaa2_mac_* provided
functions. While at it, we also export the MAC statistics in ethtool
like we do for dpaa2-eth.

Ioana Ciornei (8):
  dpaa2-switch: request all interrupts sources on the DPSW
  dpaa2-switch: use the port index in the IRQ handler
  dpaa2-switch: do not enable the DPSW at probe time
  dpaa2-switch: no need to check link state right after ndo_open
  bus: fsl-mc: extend fsl_mc_get_endpoint() to pass interface ID
  dpaa2-switch: integrate the MAC endpoint support
  dpaa2-switch: add a prefix to HW ethtool stats
  dpaa2-switch: export MAC statistics in ethtool

 drivers/bus/fsl-mc/fsl-mc-bus.c               |   4 +-
 drivers/net/ethernet/freescale/dpaa2/Makefile |   2 +-
 .../net/ethernet/freescale/dpaa2/dpaa2-eth.c  |   2 +-
 .../freescale/dpaa2/dpaa2-switch-ethtool.c    |  56 +++++--
 .../ethernet/freescale/dpaa2/dpaa2-switch.c   | 151 +++++++++++++-----
 .../ethernet/freescale/dpaa2/dpaa2-switch.h   |  18 +++
 drivers/net/ethernet/freescale/dpaa2/dpsw.h   |   5 +
 include/linux/fsl/mc.h                        |   3 +-
 8 files changed, 177 insertions(+), 64 deletions(-)

-- 
2.31.1

```
