# Re: \[RFC PATCH net-next 1/4\] dt-bindings: dmaengine: bam\_dma: Add remote power collapse mode

- From: Rob Herring \<robh@kernel.org\>
- Date: 2021-07-29 19:36:42 
- List: netdev
- Page: https://ratatoskr.run/netdev/2021/07/1462490
- Thread: https://ratatoskr.run/netdev/2021/07/1449346/t.md

```text
On Mon, Jul 19, 2021 at 04:53:14PM +0200, Stephan Gerhold wrote:
> In some configurations, the BAM DMA controller is set up by a remote
> processor and the local processor can simply start making use of it
> without setting up the BAM. This is already supported using the
> "qcom,controlled-remotely" property.
> 
> However, for some reason another possible configuration is that the
> remote processor is responsible for powering up the BAM, but we are
> still responsible for initializing it (e.g. resetting it etc). Add
> a "qcom,remote-power-collapse" property to describe that configuration.
> 
> Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
> ---
> NOTE: This is *not* a compile-time requirement for the BAM-DMUX driver
>       so this could also go through the dmaengine tree.
> 
> Also note that there is an ongoing effort to convert these bindings
> to DT schema but sadly there were not any updates for a while. :/
> https://lore.kernel.org/linux-arm-msm/20210519143700.27392-2-bhupesh.sharma@linaro.org/
> ---
>  Documentation/devicetree/bindings/dma/qcom_bam_dma.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
> index cf5b9e44432c..362a4f0905a8 100644
> --- a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
> +++ b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
> @@ -15,6 +15,8 @@ Required properties:
>    the secure world.
>  - qcom,controlled-remotely : optional, indicates that the bam is controlled by
>    remote proccessor i.e. execution environment.
> +- qcom,remote-power-collapse : optional, indicates that the bam is powered up by
> +  a remote processor but must be initialized by the local processor.

Wouldn't 'qcom,remote-power' or 'qcom,remote-powered' be sufficient? I 
don't understand what 'collapse' means here. Doesn't sound good though.

Rob
```
