# \[PATCH\] dt-bindings: Remove "status" from schema examples

- Subsystems: NETWORKING DRIVERS, DRM DRIVERS, DRM DRIVERS AND MISC GPU PATCHES, DRM DRIVERS FOR ALLWINNER A10, DRM PANEL DRIVERS, LITEX PLATFORM, MEDIA DRIVERS FOR RENESAS - DRIF, MEDIA INPUT INFRASTRUCTURE (V4L/DVB), NFC SUBSYSTEM, OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, QUALCOMM IPQ4019 VQMMC REGULATOR DRIVER, REAL TIME CLOCK (RTC) SUBSYSTEM, RESET CONTROLLER FRAMEWORK, SAMSUNG S3FWRN5 NFC DRIVER, SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC), STM32 AUDIO (ASoC) DRIVERS, THE REST, VOLTAGE AND CURRENT REGULATOR FRAMEWORK
- Maintainers: Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Chen-Yu Tsai, Neil Armstrong, Karol Gugala, Mateusz Holenko, Joel Stanley, Fabrizio Castro, Mauro Carvalho Chehab, David Heidelberg, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Robert Marko, Luka Perkov, Alexandre Belloni, Philipp Zabel, Krzysztof Kozlowski, Liam Girdwood, Mark Brown, Olivier Moysan, Arnaud Pouliquen, Linus Torvalds
- Status: LANDED (61aaaa8110b1 · 2021-07-27 14:03)
- Landed in mainline as 61aaaa8110b1 on 2021-07-27.
- List: netdev
- 11 messages, 9 authors
- Page: https://ratatoskr.run/netdev/2021/07/1452653/t

## \[PATCH\] dt-bindings: Remove "status" from schema examples

- From: Rob Herring \<robh@kernel.org\>
- Date: 2021-07-20 17:21:05 
- Message: https://ratatoskr.run/netdev/2021/07/1452653.md

```text
There's no reason to have "status" properties in examples. "okay" is the
default, and "disabled" turns off some schema checks ('required'
specifically).

Enabling qca,ar71xx causes a warning, so let's fix the node names:

Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
        From schema: schemas/phy/phy-provider.yaml

Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <redacted>
Cc: Thierry Reding <redacted>
Cc: Sam Ravnborg <redacted>
Cc: Rui Miguel Silva <rmfrfs@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Robert Marko <robert.marko@sartura.hr>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Alessandro Zummo <redacted>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com>
Cc: "G. Jaya Kumaran" <redacted>
Cc: Linus Walleij <redacted>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: ChiYuan Huang <redacted>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Dilip Kota <redacted>
Cc: Karol Gugala <kgugala@antmicro.com>
Cc: Mateusz Holenko <mholenko@antmicro.com>
Cc: Olivier Moysan <redacted>
Cc: Peter Ujfalusi <redacted>
Cc: <redacted>
Cc: <redacted>
Cc: <redacted>
Cc: <redacted>
Cc: <redacted>
Signed-off-by: Rob Herring <robh@kernel.org>
---
 .../display/allwinner,sun8i-a83t-dw-hdmi.yaml |  2 --
 .../display/panel/boe,tv101wum-nl6.yaml       |  1 -
 .../bindings/media/nxp,imx7-mipi-csi2.yaml    |  2 --
 .../bindings/media/renesas,drif.yaml          |  1 -
 .../bindings/net/intel,dwmac-plat.yaml        |  2 --
 .../bindings/net/intel,ixp4xx-ethernet.yaml   |  2 --
 .../bindings/net/nfc/samsung,s3fwrn5.yaml     |  3 ---
 .../devicetree/bindings/net/qca,ar71xx.yaml   | 25 ++++---------------
 .../regulator/richtek,rt6245-regulator.yaml   |  1 -
 .../regulator/vqmmc-ipq4019-regulator.yaml    |  1 -
 .../reset/hisilicon,hi3660-reset.yaml         |  1 -
 .../bindings/reset/intel,rcu-gw.yaml          |  1 -
 .../bindings/rtc/microcrystal,rv3032.yaml     |  1 -
 .../soc/litex/litex,soc-controller.yaml       |  1 -
 .../bindings/sound/st,stm32-sai.yaml          |  2 --
 .../bindings/sound/ti,j721e-cpb-audio.yaml    |  2 --
 .../sound/ti,j721e-cpb-ivi-audio.yaml         |  2 --
 17 files changed, 5 insertions(+), 45 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
index 5d42d36608d9..4951b5ef5c6a 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
@@ -174,7 +174,6 @@ examples:
         phy-names = "phy";
         pinctrl-names = "default";
         pinctrl-0 = <&hdmi_pins>;
-        status = "disabled";
 
         ports {
             #address-cells = <1>;
@@ -233,7 +232,6 @@ examples:
         phy-names = "phy";
         pinctrl-names = "default";
         pinctrl-0 = <&hdmi_pins>;
-        status = "disabled";
 
         ports {
             #address-cells = <1>;
diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
index 38bc1d1b511e..b87a2e28c866 100644
--- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
+++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
@@ -70,7 +70,6 @@ examples:
             avee-supply = <&ppvarp_lcd>;
             pp1800-supply = <&pp1800_lcd>;
             backlight = <&backlight_lcd0>;
-            status = "okay";
             port {
                 panel_in: endpoint {
                     remote-endpoint = <&dsi_out>;
diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
index 7c09eec78ce5..877183cf4278 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
@@ -200,8 +200,6 @@ examples:
         clock-names = "pclk", "wrap", "phy", "axi";
         power-domains = <&mipi_pd>;
 
-        status = "disabled";
-
         ports {
             #address-cells = <1>;
             #size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml
index 2867d11fe156..9403b235e976 100644
--- a/Documentation/devicetree/bindings/media/renesas,drif.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
@@ -242,7 +242,6 @@ examples:
                     power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
                     resets = <&cpg 513>;
                     renesas,bonding = <&drif11>;
-                    status = "disabled";
             };
 
             drif11: rif@e6f70000 {
diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
index c1948ce00081..79fa04f5e40d 100644
--- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
+++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
@@ -116,8 +116,6 @@ examples:
         snps,mtl-rx-config = <&mtl_rx_setup>;
         snps,mtl-tx-config = <&mtl_tx_setup>;
         snps,tso;
-        status = "okay";
-
         mdio0 {
             #address-cells = <1>;
             #size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
index f2e91d1bf7d7..378ed2d3b003 100644
--- a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
+++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
@@ -71,7 +71,6 @@ examples:
     ethernet@c8009000 {
       compatible = "intel,ixp4xx-ethernet";
       reg = <0xc8009000 0x1000>;
-      status = "disabled";
       queue-rx = <&qmgr 4>;
       queue-txready = <&qmgr 21>;
       intel,npe-handle = <&npe 1>;
@@ -82,7 +81,6 @@ examples:
     ethernet@c800c000 {
       compatible = "intel,ixp4xx-ethernet";
       reg = <0xc800c000 0x1000>;
-      status = "disabled";
       queue-rx = <&qmgr 3>;
       queue-txready = <&qmgr 20>;
       intel,npe-handle = <&npe 2>;
diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
index 081742c2b726..64995cbb0f97 100644
--- a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
+++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
@@ -90,14 +90,11 @@ examples:
   # UART example on Raspberry Pi
   - |
     uart0 {
-        status = "okay";
-
         nfc {
             compatible = "samsung,s3fwrn82";
 
             en-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
             wake-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
 
-            status = "okay";
         };
     };
diff --git a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
index f0db22645d73..cf4d35edaa1b 100644
--- a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
+++ b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
@@ -101,8 +101,6 @@ examples:
 
         phy-mode = "gmii";
 
-        status = "disabled";
-
         fixed-link {
             speed = <1000>;
             full-duplex;
@@ -148,32 +146,24 @@ examples:
                         reg = <0x1>;
                         phy-handle = <&phy_port0>;
                         phy-mode = "internal";
-
-                        status = "disabled";
                     };
 
                     switch_port2: port@2 {
                         reg = <0x2>;
                         phy-handle = <&phy_port1>;
                         phy-mode = "internal";
-
-                        status = "disabled";
                     };
 
                     switch_port3: port@3 {
                         reg = <0x3>;
                         phy-handle = <&phy_port2>;
                         phy-mode = "internal";
-
-                        status = "disabled";
                     };
 
                     switch_port4: port@4 {
                         reg = <0x4>;
                         phy-handle = <&phy_port3>;
                         phy-mode = "internal";
-
-                        status = "disabled";
                     };
                 };
 
@@ -183,34 +173,29 @@ examples:
 
                     interrupt-parent = <&switch10>;
 
-                    phy_port0: phy@0 {
+                    phy_port0: ethernet-phy@0 {
                         reg = <0x0>;
                         interrupts = <0>;
-                        status = "disabled";
                     };
 
-                    phy_port1: phy@1 {
+                    phy_port1: ethernet-phy@1 {
                         reg = <0x1>;
                         interrupts = <0>;
-                        status = "disabled";
                     };
 
-                    phy_port2: phy@2 {
+                    phy_port2: ethernet-phy@2 {
                         reg = <0x2>;
                         interrupts = <0>;
-                        status = "disabled";
                     };
 
-                    phy_port3: phy@3 {
+                    phy_port3: ethernet-phy@3 {
                         reg = <0x3>;
                         interrupts = <0>;
-                        status = "disabled";
                     };
 
-                    phy_port4: phy@4 {
+                    phy_port4: ethernet-phy@4 {
                         reg = <0x4>;
                         interrupts = <0>;
-                        status = "disabled";
                     };
                 };
             };
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
index 796ceac87445..e983d0e70c9b 100644
--- a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
@@ -77,7 +77,6 @@ examples:
 
       rt6245@34 {
         compatible = "richtek,rt6245";
-        status = "okay";
         reg = <0x34>;
         enable-gpios = <&gpio26 2 0>;
 
diff --git a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
index 6f45582c914e..dd7a2f92634c 100644
--- a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
@@ -39,6 +39,5 @@ examples:
       regulator-min-microvolt = <1500000>;
       regulator-max-microvolt = <3000000>;
       regulator-always-on;
-      status = "disabled";
     };
 ...
diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
index 9bf40952e5b7..b0c41ab1a746 100644
--- a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
@@ -72,6 +72,5 @@ examples:
         resets = <&iomcu_rst 0x20 3>;
         pinctrl-names = "default";
         pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
-        status = "disabled";
     };
 ...
diff --git a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
index 6b2d56cc3f38..13bf6bb3f097 100644
--- a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
+++ b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
@@ -57,7 +57,6 @@ examples:
     };
 
     pwm: pwm@e0d00000 {
-        status = "disabled";
         compatible = "intel,lgm-pwm";
         reg = <0xe0d00000 0x30>;
         clocks = <&cgu0 1>;
diff --git a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
index a2c55303810d..9593840a4a2b 100644
--- a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
+++ b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
@@ -53,7 +53,6 @@ examples:
         rtc@51 {
             compatible = "microcrystal,rv3032";
             reg = <0x51>;
-            status = "okay";
             pinctrl-0 = <&rtc_nint_pins>;
             interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>;
             trickle-resistor-ohms = <7000>;
diff --git a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
index c8b57c7fd08c..ecae9fa8561b 100644
--- a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
+++ b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
@@ -35,7 +35,6 @@ examples:
     soc_ctrl0: soc-controller@f0000000 {
         compatible = "litex,soc-controller";
         reg = <0xf0000000 0xc>;
-        status = "okay";
     };
 
 ...
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
index 06e83461705c..f97132400bb6 100644
--- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
+++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
@@ -180,7 +180,6 @@ examples:
       pinctrl-names = "default", "sleep";
       pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
       pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
-      status = "okay";
 
       sai2a: audio-controller@4400b004 {
         #sound-dai-cells = <0>;
@@ -190,7 +189,6 @@ examples:
         dma-names = "tx";
         clocks = <&rcc SAI2_K>;
         clock-names = "sai_ck";
-        status = "okay";
       };
     };
 
diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
index ec06789b21df..6806f53a4aed 100644
--- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
+++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
@@ -127,8 +127,6 @@ examples:
         compatible = "ti,j721e-cpb-audio";
         model = "j721e-cpb";
 
-        status = "okay";
-
         ti,cpb-mcasp = <&mcasp10>;
         ti,cpb-codec = <&pcm3168a_1>;
 
diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
index ee9f960de36b..859d369c71e2 100644
--- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
+++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
@@ -119,8 +119,6 @@ examples:
         compatible = "ti,j721e-cpb-ivi-audio";
         model = "j721e-cpb-ivi";
 
-        status = "okay";
-
         ti,cpb-mcasp = <&mcasp10>;
         ti,cpb-codec = <&pcm3168a_1>;
 
-- 
2.27.0

```

## Re: \[PATCH\] dt-bindings: Remove "status" from schema examples

- From: Mauro Carvalho Chehab \<mchehab+huawei@kernel.org\>
- Date: 2021-07-20 17:50:29 
- Message: https://ratatoskr.run/netdev/2021/07/1452674.md

```text
Em Tue, 20 Jul 2021 11:20:25 -0600
Rob Herring [ref] escreveu:

> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).
> 
> Enabling qca,ar71xx causes a warning, so let's fix the node names:
> 
> Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
>         From schema: schemas/phy/phy-provider.yaml
> 
> Cc: Maxime Ripard <mripard@kernel.org>
> Cc: Chen-Yu Tsai <redacted>
> Cc: Thierry Reding <redacted>
> Cc: Sam Ravnborg <redacted>
> Cc: Rui Miguel Silva <rmfrfs@gmail.com>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Robert Marko <robert.marko@sartura.hr>
> Cc: Philipp Zabel <p.zabel@pengutronix.de>
> Cc: Alessandro Zummo <redacted>
> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
> Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com>
> Cc: "G. Jaya Kumaran" <redacted>
> Cc: Linus Walleij <redacted>
> Cc: Oleksij Rempel <o.rempel@pengutronix.de>
> Cc: ChiYuan Huang <redacted>
> Cc: Wei Xu <xuwei5@hisilicon.com>
> Cc: Dilip Kota <redacted>
> Cc: Karol Gugala <kgugala@antmicro.com>
> Cc: Mateusz Holenko <mholenko@antmicro.com>
> Cc: Olivier Moysan <redacted>
> Cc: Peter Ujfalusi <redacted>
> Cc: <redacted>
> Cc: <redacted>
> Cc: <redacted>
> Cc: <redacted>
> Cc: <redacted>
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
>  .../display/allwinner,sun8i-a83t-dw-hdmi.yaml |  2 --
>  .../display/panel/boe,tv101wum-nl6.yaml       |  1 -

>  .../bindings/media/nxp,imx7-mipi-csi2.yaml    |  2 --
>  .../bindings/media/renesas,drif.yaml          |  1 -

Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> # For media


Thanks,
Mauro
```

## Re: \[PATCH\] dt-bindings: Remove "status" from schema examples

- From: Laurent Pinchart \<laurent.pinchart@ideasonboard.com\>
- Date: 2021-07-20 17:58:56 
- Message: https://ratatoskr.run/netdev/2021/07/1452687.md

```text
Hi Rob,

Thank you for the patch.

On Tue, Jul 20, 2021 at 11:20:25AM -0600, Rob Herring wrote:
> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).
> 
> Enabling qca,ar71xx causes a warning, so let's fix the node names:
> 
> Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
>         From schema: schemas/phy/phy-provider.yaml
> 
> Cc: Maxime Ripard <mripard@kernel.org>
> Cc: Chen-Yu Tsai <redacted>
> Cc: Thierry Reding <redacted>
> Cc: Sam Ravnborg <redacted>
> Cc: Rui Miguel Silva <rmfrfs@gmail.com>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Robert Marko <robert.marko@sartura.hr>
> Cc: Philipp Zabel <p.zabel@pengutronix.de>
> Cc: Alessandro Zummo <redacted>
> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
> Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com>
> Cc: "G. Jaya Kumaran" <redacted>
> Cc: Linus Walleij <redacted>
> Cc: Oleksij Rempel <o.rempel@pengutronix.de>
> Cc: ChiYuan Huang <redacted>
> Cc: Wei Xu <xuwei5@hisilicon.com>
> Cc: Dilip Kota <redacted>
> Cc: Karol Gugala <kgugala@antmicro.com>
> Cc: Mateusz Holenko <mholenko@antmicro.com>
> Cc: Olivier Moysan <redacted>
> Cc: Peter Ujfalusi <redacted>
> Cc: <redacted>
> Cc: <redacted>
> Cc: <redacted>
> Cc: <redacted>
> Cc: <redacted>
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
>  .../display/allwinner,sun8i-a83t-dw-hdmi.yaml |  2 --
>  .../display/panel/boe,tv101wum-nl6.yaml       |  1 -
>  .../bindings/media/nxp,imx7-mipi-csi2.yaml    |  2 --
>  .../bindings/media/renesas,drif.yaml          |  1 -
>  .../bindings/net/intel,dwmac-plat.yaml        |  2 --
>  .../bindings/net/intel,ixp4xx-ethernet.yaml   |  2 --
>  .../bindings/net/nfc/samsung,s3fwrn5.yaml     |  3 ---
>  .../devicetree/bindings/net/qca,ar71xx.yaml   | 25 ++++---------------
>  .../regulator/richtek,rt6245-regulator.yaml   |  1 -
>  .../regulator/vqmmc-ipq4019-regulator.yaml    |  1 -
>  .../reset/hisilicon,hi3660-reset.yaml         |  1 -
>  .../bindings/reset/intel,rcu-gw.yaml          |  1 -
>  .../bindings/rtc/microcrystal,rv3032.yaml     |  1 -
>  .../soc/litex/litex,soc-controller.yaml       |  1 -
>  .../bindings/sound/st,stm32-sai.yaml          |  2 --
>  .../bindings/sound/ti,j721e-cpb-audio.yaml    |  2 --
>  .../sound/ti,j721e-cpb-ivi-audio.yaml         |  2 --
>  17 files changed, 5 insertions(+), 45 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
> index 5d42d36608d9..4951b5ef5c6a 100644
> --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
> +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
> @@ -174,7 +174,6 @@ examples:
>          phy-names = "phy";
>          pinctrl-names = "default";
>          pinctrl-0 = <&hdmi_pins>;
> -        status = "disabled";
>  
>          ports {
>              #address-cells = <1>;
> @@ -233,7 +232,6 @@ examples:
>          phy-names = "phy";
>          pinctrl-names = "default";
>          pinctrl-0 = <&hdmi_pins>;
> -        status = "disabled";
>  
>          ports {
>              #address-cells = <1>;
> diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> index 38bc1d1b511e..b87a2e28c866 100644
> --- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> @@ -70,7 +70,6 @@ examples:
>              avee-supply = <&ppvarp_lcd>;
>              pp1800-supply = <&pp1800_lcd>;
>              backlight = <&backlight_lcd0>;
> -            status = "okay";
>              port {
>                  panel_in: endpoint {
>                      remote-endpoint = <&dsi_out>;
> diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> index 7c09eec78ce5..877183cf4278 100644
> --- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> +++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> @@ -200,8 +200,6 @@ examples:
>          clock-names = "pclk", "wrap", "phy", "axi";
>          power-domains = <&mipi_pd>;
>  
> -        status = "disabled";
> -
>          ports {
>              #address-cells = <1>;
>              #size-cells = <0>;
> diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> index 2867d11fe156..9403b235e976 100644
> --- a/Documentation/devicetree/bindings/media/renesas,drif.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> @@ -242,7 +242,6 @@ examples:
>                      power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
>                      resets = <&cpg 513>;
>                      renesas,bonding = <&drif11>;
> -                    status = "disabled";
>              };
>  
>              drif11: rif@e6f70000 {
> diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> index c1948ce00081..79fa04f5e40d 100644
> --- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> +++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> @@ -116,8 +116,6 @@ examples:
>          snps,mtl-rx-config = <&mtl_rx_setup>;
>          snps,mtl-tx-config = <&mtl_tx_setup>;
>          snps,tso;
> -        status = "okay";
> -

I would have kept the blank line here.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

>          mdio0 {
>              #address-cells = <1>;
>              #size-cells = <0>;
> diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
> index f2e91d1bf7d7..378ed2d3b003 100644
> --- a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
> +++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
> @@ -71,7 +71,6 @@ examples:
>      ethernet@c8009000 {
>        compatible = "intel,ixp4xx-ethernet";
>        reg = <0xc8009000 0x1000>;
> -      status = "disabled";
>        queue-rx = <&qmgr 4>;
>        queue-txready = <&qmgr 21>;
>        intel,npe-handle = <&npe 1>;
> @@ -82,7 +81,6 @@ examples:
>      ethernet@c800c000 {
>        compatible = "intel,ixp4xx-ethernet";
>        reg = <0xc800c000 0x1000>;
> -      status = "disabled";
>        queue-rx = <&qmgr 3>;
>        queue-txready = <&qmgr 20>;
>        intel,npe-handle = <&npe 2>;
> diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
> index 081742c2b726..64995cbb0f97 100644
> --- a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
> +++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
> @@ -90,14 +90,11 @@ examples:
>    # UART example on Raspberry Pi
>    - |
>      uart0 {
> -        status = "okay";
> -
>          nfc {
>              compatible = "samsung,s3fwrn82";
>  
>              en-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
>              wake-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
>  
> -            status = "okay";
>          };
>      };
> diff --git a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
> index f0db22645d73..cf4d35edaa1b 100644
> --- a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
> +++ b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
> @@ -101,8 +101,6 @@ examples:
>  
>          phy-mode = "gmii";
>  
> -        status = "disabled";
> -
>          fixed-link {
>              speed = <1000>;
>              full-duplex;
> @@ -148,32 +146,24 @@ examples:
>                          reg = <0x1>;
>                          phy-handle = <&phy_port0>;
>                          phy-mode = "internal";
> -
> -                        status = "disabled";
>                      };
>  
>                      switch_port2: port@2 {
>                          reg = <0x2>;
>                          phy-handle = <&phy_port1>;
>                          phy-mode = "internal";
> -
> -                        status = "disabled";
>                      };
>  
>                      switch_port3: port@3 {
>                          reg = <0x3>;
>                          phy-handle = <&phy_port2>;
>                          phy-mode = "internal";
> -
> -                        status = "disabled";
>                      };
>  
>                      switch_port4: port@4 {
>                          reg = <0x4>;
>                          phy-handle = <&phy_port3>;
>                          phy-mode = "internal";
> -
> -                        status = "disabled";
>                      };
>                  };
>  
> @@ -183,34 +173,29 @@ examples:
>  
>                      interrupt-parent = <&switch10>;
>  
> -                    phy_port0: phy@0 {
> +                    phy_port0: ethernet-phy@0 {
>                          reg = <0x0>;
>                          interrupts = <0>;
> -                        status = "disabled";
>                      };
>  
> -                    phy_port1: phy@1 {
> +                    phy_port1: ethernet-phy@1 {
>                          reg = <0x1>;
>                          interrupts = <0>;
> -                        status = "disabled";
>                      };
>  
> -                    phy_port2: phy@2 {
> +                    phy_port2: ethernet-phy@2 {
>                          reg = <0x2>;
>                          interrupts = <0>;
> -                        status = "disabled";
>                      };
>  
> -                    phy_port3: phy@3 {
> +                    phy_port3: ethernet-phy@3 {
>                          reg = <0x3>;
>                          interrupts = <0>;
> -                        status = "disabled";
>                      };
>  
> -                    phy_port4: phy@4 {
> +                    phy_port4: ethernet-phy@4 {
>                          reg = <0x4>;
>                          interrupts = <0>;
> -                        status = "disabled";
>                      };
>                  };
>              };
> diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
> index 796ceac87445..e983d0e70c9b 100644
> --- a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
> @@ -77,7 +77,6 @@ examples:
>  
>        rt6245@34 {
>          compatible = "richtek,rt6245";
> -        status = "okay";
>          reg = <0x34>;
>          enable-gpios = <&gpio26 2 0>;
>  
> diff --git a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
> index 6f45582c914e..dd7a2f92634c 100644
> --- a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
> @@ -39,6 +39,5 @@ examples:
>        regulator-min-microvolt = <1500000>;
>        regulator-max-microvolt = <3000000>;
>        regulator-always-on;
> -      status = "disabled";
>      };
>  ...
> diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
> index 9bf40952e5b7..b0c41ab1a746 100644
> --- a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
> +++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
> @@ -72,6 +72,5 @@ examples:
>          resets = <&iomcu_rst 0x20 3>;
>          pinctrl-names = "default";
>          pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
> -        status = "disabled";
>      };
>  ...
> diff --git a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> index 6b2d56cc3f38..13bf6bb3f097 100644
> --- a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> +++ b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> @@ -57,7 +57,6 @@ examples:
>      };
>  
>      pwm: pwm@e0d00000 {
> -        status = "disabled";
>          compatible = "intel,lgm-pwm";
>          reg = <0xe0d00000 0x30>;
>          clocks = <&cgu0 1>;
> diff --git a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
> index a2c55303810d..9593840a4a2b 100644
> --- a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
> +++ b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
> @@ -53,7 +53,6 @@ examples:
>          rtc@51 {
>              compatible = "microcrystal,rv3032";
>              reg = <0x51>;
> -            status = "okay";
>              pinctrl-0 = <&rtc_nint_pins>;
>              interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>;
>              trickle-resistor-ohms = <7000>;
> diff --git a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
> index c8b57c7fd08c..ecae9fa8561b 100644
> --- a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
> +++ b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
> @@ -35,7 +35,6 @@ examples:
>      soc_ctrl0: soc-controller@f0000000 {
>          compatible = "litex,soc-controller";
>          reg = <0xf0000000 0xc>;
> -        status = "okay";
>      };
>  
>  ...
> diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> index 06e83461705c..f97132400bb6 100644
> --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> @@ -180,7 +180,6 @@ examples:
>        pinctrl-names = "default", "sleep";
>        pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
>        pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
> -      status = "okay";
>  
>        sai2a: audio-controller@4400b004 {
>          #sound-dai-cells = <0>;
> @@ -190,7 +189,6 @@ examples:
>          dma-names = "tx";
>          clocks = <&rcc SAI2_K>;
>          clock-names = "sai_ck";
> -        status = "okay";
>        };
>      };
>  
> diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
> index ec06789b21df..6806f53a4aed 100644
> --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
> +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
> @@ -127,8 +127,6 @@ examples:
>          compatible = "ti,j721e-cpb-audio";
>          model = "j721e-cpb";
>  
> -        status = "okay";
> -
>          ti,cpb-mcasp = <&mcasp10>;
>          ti,cpb-codec = <&pcm3168a_1>;
>  
> diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
> index ee9f960de36b..859d369c71e2 100644
> --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
> +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
> @@ -119,8 +119,6 @@ examples:
>          compatible = "ti,j721e-cpb-ivi-audio";
>          model = "j721e-cpb-ivi";
>  
> -        status = "okay";
> -
>          ti,cpb-mcasp = <&mcasp10>;
>          ti,cpb-codec = <&pcm3168a_1>;
>  

-- 
Regards,

Laurent Pinchart
```

## Re: \[PATCH\] dt-bindings: Remove "status" from schema examples

- From: Rui Miguel Silva \<rmfrfs@gmail.com\>
- Date: 2021-07-20 18:16:39 
- Message: https://ratatoskr.run/netdev/2021/07/1452699.md

```text
On Tue Jul 20, 2021 at 6:20 PM WEST, Rob Herring wrote:

> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).
>
> Enabling qca,ar71xx causes a warning, so let's fix the node names:
>
> Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
>         From schema: schemas/phy/phy-provider.yaml
>
> Cc: Maxime Ripard <mripard@kernel.org>
> Cc: Chen-Yu Tsai <redacted>
> Cc: Thierry Reding <redacted>
> Cc: Sam Ravnborg <redacted>
> Cc: Rui Miguel Silva <rmfrfs@gmail.com>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Robert Marko <robert.marko@sartura.hr>
> Cc: Philipp Zabel <p.zabel@pengutronix.de>
> Cc: Alessandro Zummo <redacted>
> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
> Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com>
> Cc: "G. Jaya Kumaran" <redacted>
> Cc: Linus Walleij <redacted>
> Cc: Oleksij Rempel <o.rempel@pengutronix.de>
> Cc: ChiYuan Huang <redacted>
> Cc: Wei Xu <xuwei5@hisilicon.com>
> Cc: Dilip Kota <redacted>
> Cc: Karol Gugala <kgugala@antmicro.com>
> Cc: Mateusz Holenko <mholenko@antmicro.com>
> Cc: Olivier Moysan <redacted>
> Cc: Peter Ujfalusi <redacted>
> Cc: <redacted>
> Cc: <redacted>
> Cc: <redacted>
> Cc: <redacted>
> Cc: <redacted>
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
>  .../display/allwinner,sun8i-a83t-dw-hdmi.yaml |  2 --
>  .../display/panel/boe,tv101wum-nl6.yaml       |  1 -
>  .../bindings/media/nxp,imx7-mipi-csi2.yaml    |  2 --

Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>

Cheers,
   Rui
```

## Re: \[PATCH\] dt-bindings: Remove "status" from schema examples

- From: Alexandre Belloni \<alexandre.belloni@bootlin.com\>
- Date: 2021-07-20 18:41:29 
- Message: https://ratatoskr.run/netdev/2021/07/1452717.md

```text
On 20/07/2021 11:20:25-0600, Rob Herring wrote:
> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).
> 
> Enabling qca,ar71xx causes a warning, so let's fix the node names:
> 
> Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
>         From schema: schemas/phy/phy-provider.yaml
> 
> Cc: Maxime Ripard <mripard@kernel.org>
> Cc: Chen-Yu Tsai <redacted>
> Cc: Thierry Reding <redacted>
> Cc: Sam Ravnborg <redacted>
> Cc: Rui Miguel Silva <rmfrfs@gmail.com>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Robert Marko <robert.marko@sartura.hr>
> Cc: Philipp Zabel <p.zabel@pengutronix.de>
> Cc: Alessandro Zummo <redacted>
> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
> Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com>
> Cc: "G. Jaya Kumaran" <redacted>
> Cc: Linus Walleij <redacted>
> Cc: Oleksij Rempel <o.rempel@pengutronix.de>
> Cc: ChiYuan Huang <redacted>
> Cc: Wei Xu <xuwei5@hisilicon.com>
> Cc: Dilip Kota <redacted>
> Cc: Karol Gugala <kgugala@antmicro.com>
> Cc: Mateusz Holenko <mholenko@antmicro.com>
> Cc: Olivier Moysan <redacted>
> Cc: Peter Ujfalusi <redacted>
> Cc: <redacted>
> Cc: <redacted>
> Cc: <redacted>
> Cc: <redacted>
> Cc: <redacted>
> Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

> ---
>  .../display/allwinner,sun8i-a83t-dw-hdmi.yaml |  2 --
>  .../display/panel/boe,tv101wum-nl6.yaml       |  1 -
>  .../bindings/media/nxp,imx7-mipi-csi2.yaml    |  2 --
>  .../bindings/media/renesas,drif.yaml          |  1 -
>  .../bindings/net/intel,dwmac-plat.yaml        |  2 --
>  .../bindings/net/intel,ixp4xx-ethernet.yaml   |  2 --
>  .../bindings/net/nfc/samsung,s3fwrn5.yaml     |  3 ---
>  .../devicetree/bindings/net/qca,ar71xx.yaml   | 25 ++++---------------
>  .../regulator/richtek,rt6245-regulator.yaml   |  1 -
>  .../regulator/vqmmc-ipq4019-regulator.yaml    |  1 -
>  .../reset/hisilicon,hi3660-reset.yaml         |  1 -
>  .../bindings/reset/intel,rcu-gw.yaml          |  1 -
>  .../bindings/rtc/microcrystal,rv3032.yaml     |  1 -
>  .../soc/litex/litex,soc-controller.yaml       |  1 -
>  .../bindings/sound/st,stm32-sai.yaml          |  2 --
>  .../bindings/sound/ti,j721e-cpb-audio.yaml    |  2 --
>  .../sound/ti,j721e-cpb-ivi-audio.yaml         |  2 --
>  17 files changed, 5 insertions(+), 45 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
> index 5d42d36608d9..4951b5ef5c6a 100644
> --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
> +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
> @@ -174,7 +174,6 @@ examples:
>          phy-names = "phy";
>          pinctrl-names = "default";
>          pinctrl-0 = <&hdmi_pins>;
> -        status = "disabled";
>  
>          ports {
>              #address-cells = <1>;
> @@ -233,7 +232,6 @@ examples:
>          phy-names = "phy";
>          pinctrl-names = "default";
>          pinctrl-0 = <&hdmi_pins>;
> -        status = "disabled";
>  
>          ports {
>              #address-cells = <1>;
> diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> index 38bc1d1b511e..b87a2e28c866 100644
> --- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> @@ -70,7 +70,6 @@ examples:
>              avee-supply = <&ppvarp_lcd>;
>              pp1800-supply = <&pp1800_lcd>;
>              backlight = <&backlight_lcd0>;
> -            status = "okay";
>              port {
>                  panel_in: endpoint {
>                      remote-endpoint = <&dsi_out>;
> diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> index 7c09eec78ce5..877183cf4278 100644
> --- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> +++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> @@ -200,8 +200,6 @@ examples:
>          clock-names = "pclk", "wrap", "phy", "axi";
>          power-domains = <&mipi_pd>;
>  
> -        status = "disabled";
> -
>          ports {
>              #address-cells = <1>;
>              #size-cells = <0>;
> diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> index 2867d11fe156..9403b235e976 100644
> --- a/Documentation/devicetree/bindings/media/renesas,drif.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> @@ -242,7 +242,6 @@ examples:
>                      power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
>                      resets = <&cpg 513>;
>                      renesas,bonding = <&drif11>;
> -                    status = "disabled";
>              };
>  
>              drif11: rif@e6f70000 {
> diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> index c1948ce00081..79fa04f5e40d 100644
> --- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> +++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> @@ -116,8 +116,6 @@ examples:
>          snps,mtl-rx-config = <&mtl_rx_setup>;
>          snps,mtl-tx-config = <&mtl_tx_setup>;
>          snps,tso;
> -        status = "okay";
> -
>          mdio0 {
>              #address-cells = <1>;
>              #size-cells = <0>;
> diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
> index f2e91d1bf7d7..378ed2d3b003 100644
> --- a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
> +++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
> @@ -71,7 +71,6 @@ examples:
>      ethernet@c8009000 {
>        compatible = "intel,ixp4xx-ethernet";
>        reg = <0xc8009000 0x1000>;
> -      status = "disabled";
>        queue-rx = <&qmgr 4>;
>        queue-txready = <&qmgr 21>;
>        intel,npe-handle = <&npe 1>;
> @@ -82,7 +81,6 @@ examples:
>      ethernet@c800c000 {
>        compatible = "intel,ixp4xx-ethernet";
>        reg = <0xc800c000 0x1000>;
> -      status = "disabled";
>        queue-rx = <&qmgr 3>;
>        queue-txready = <&qmgr 20>;
>        intel,npe-handle = <&npe 2>;
> diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
> index 081742c2b726..64995cbb0f97 100644
> --- a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
> +++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
> @@ -90,14 +90,11 @@ examples:
>    # UART example on Raspberry Pi
>    - |
>      uart0 {
> -        status = "okay";
> -
>          nfc {
>              compatible = "samsung,s3fwrn82";
>  
>              en-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
>              wake-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
>  
> -            status = "okay";
>          };
>      };
> diff --git a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
> index f0db22645d73..cf4d35edaa1b 100644
> --- a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
> +++ b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
> @@ -101,8 +101,6 @@ examples:
>  
>          phy-mode = "gmii";
>  
> -        status = "disabled";
> -
>          fixed-link {
>              speed = <1000>;
>              full-duplex;
> @@ -148,32 +146,24 @@ examples:
>                          reg = <0x1>;
>                          phy-handle = <&phy_port0>;
>                          phy-mode = "internal";
> -
> -                        status = "disabled";
>                      };
>  
>                      switch_port2: port@2 {
>                          reg = <0x2>;
>                          phy-handle = <&phy_port1>;
>                          phy-mode = "internal";
> -
> -                        status = "disabled";
>                      };
>  
>                      switch_port3: port@3 {
>                          reg = <0x3>;
>                          phy-handle = <&phy_port2>;
>                          phy-mode = "internal";
> -
> -                        status = "disabled";
>                      };
>  
>                      switch_port4: port@4 {
>                          reg = <0x4>;
>                          phy-handle = <&phy_port3>;
>                          phy-mode = "internal";
> -
> -                        status = "disabled";
>                      };
>                  };
>  
> @@ -183,34 +173,29 @@ examples:
>  
>                      interrupt-parent = <&switch10>;
>  
> -                    phy_port0: phy@0 {
> +                    phy_port0: ethernet-phy@0 {
>                          reg = <0x0>;
>                          interrupts = <0>;
> -                        status = "disabled";
>                      };
>  
> -                    phy_port1: phy@1 {
> +                    phy_port1: ethernet-phy@1 {
>                          reg = <0x1>;
>                          interrupts = <0>;
> -                        status = "disabled";
>                      };
>  
> -                    phy_port2: phy@2 {
> +                    phy_port2: ethernet-phy@2 {
>                          reg = <0x2>;
>                          interrupts = <0>;
> -                        status = "disabled";
>                      };
>  
> -                    phy_port3: phy@3 {
> +                    phy_port3: ethernet-phy@3 {
>                          reg = <0x3>;
>                          interrupts = <0>;
> -                        status = "disabled";
>                      };
>  
> -                    phy_port4: phy@4 {
> +                    phy_port4: ethernet-phy@4 {
>                          reg = <0x4>;
>                          interrupts = <0>;
> -                        status = "disabled";
>                      };
>                  };
>              };
> diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
> index 796ceac87445..e983d0e70c9b 100644
> --- a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
> @@ -77,7 +77,6 @@ examples:
>  
>        rt6245@34 {
>          compatible = "richtek,rt6245";
> -        status = "okay";
>          reg = <0x34>;
>          enable-gpios = <&gpio26 2 0>;
>  
> diff --git a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
> index 6f45582c914e..dd7a2f92634c 100644
> --- a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
> @@ -39,6 +39,5 @@ examples:
>        regulator-min-microvolt = <1500000>;
>        regulator-max-microvolt = <3000000>;
>        regulator-always-on;
> -      status = "disabled";
>      };
>  ...
> diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
> index 9bf40952e5b7..b0c41ab1a746 100644
> --- a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
> +++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
> @@ -72,6 +72,5 @@ examples:
>          resets = <&iomcu_rst 0x20 3>;
>          pinctrl-names = "default";
>          pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
> -        status = "disabled";
>      };
>  ...
> diff --git a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> index 6b2d56cc3f38..13bf6bb3f097 100644
> --- a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> +++ b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> @@ -57,7 +57,6 @@ examples:
>      };
>  
>      pwm: pwm@e0d00000 {
> -        status = "disabled";
>          compatible = "intel,lgm-pwm";
>          reg = <0xe0d00000 0x30>;
>          clocks = <&cgu0 1>;
> diff --git a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
> index a2c55303810d..9593840a4a2b 100644
> --- a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
> +++ b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
> @@ -53,7 +53,6 @@ examples:
>          rtc@51 {
>              compatible = "microcrystal,rv3032";
>              reg = <0x51>;
> -            status = "okay";
>              pinctrl-0 = <&rtc_nint_pins>;
>              interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>;
>              trickle-resistor-ohms = <7000>;
> diff --git a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
> index c8b57c7fd08c..ecae9fa8561b 100644
> --- a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
> +++ b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
> @@ -35,7 +35,6 @@ examples:
>      soc_ctrl0: soc-controller@f0000000 {
>          compatible = "litex,soc-controller";
>          reg = <0xf0000000 0xc>;
> -        status = "okay";
>      };
>  
>  ...
> diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> index 06e83461705c..f97132400bb6 100644
> --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> @@ -180,7 +180,6 @@ examples:
>        pinctrl-names = "default", "sleep";
>        pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
>        pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
> -      status = "okay";
>  
>        sai2a: audio-controller@4400b004 {
>          #sound-dai-cells = <0>;
> @@ -190,7 +189,6 @@ examples:
>          dma-names = "tx";
>          clocks = <&rcc SAI2_K>;
>          clock-names = "sai_ck";
> -        status = "okay";
>        };
>      };
>  
> diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
> index ec06789b21df..6806f53a4aed 100644
> --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
> +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
> @@ -127,8 +127,6 @@ examples:
>          compatible = "ti,j721e-cpb-audio";
>          model = "j721e-cpb";
>  
> -        status = "okay";
> -
>          ti,cpb-mcasp = <&mcasp10>;
>          ti,cpb-codec = <&pcm3168a_1>;
>  
> diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
> index ee9f960de36b..859d369c71e2 100644
> --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
> +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
> @@ -119,8 +119,6 @@ examples:
>          compatible = "ti,j721e-cpb-ivi-audio";
>          model = "j721e-cpb-ivi";
>  
> -        status = "okay";
> -
>          ti,cpb-mcasp = <&mcasp10>;
>          ti,cpb-codec = <&pcm3168a_1>;
>  
> -- 
> 2.27.0
> 

-- 
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
```

## Re: \[PATCH\] dt-bindings: Remove "status" from schema examples

- From: Mark Brown \<broonie@kernel.org\>
- Date: 2021-07-20 20:45:13 
- Message: https://ratatoskr.run/netdev/2021/07/1452766.md

```text
On Tue, Jul 20, 2021 at 11:20:25AM -0600, Rob Herring wrote:
> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).

Acked-by: Mark Brown <broonie@kernel.org>
```

## Re: \[PATCH\] dt-bindings: Remove "status" from schema examples

- From: Philipp Zabel \<p.zabel@pengutronix.de\>
- Date: 2021-07-21 08:41:14 
- Message: https://ratatoskr.run/netdev/2021/07/1453142.md

```text
Hi Rob,

On Tue, 2021-07-20 at 11:20 -0600, Rob Herring wrote:
> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).

Is this documented somewhere? If not, should it be? (Maybe in writing-
schema.rst -> Schema Contents -> examples?)
 
> Enabling qca,ar71xx causes a warning, so let's fix the node names:
> 
> Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
>         From schema: schemas/phy/phy-provider.yaml
> 
> Cc: Maxime Ripard <mripard@kernel.org>
> Cc: Chen-Yu Tsai <redacted>
> Cc: Thierry Reding <redacted>
> Cc: Sam Ravnborg <redacted>
> Cc: Rui Miguel Silva <rmfrfs@gmail.com>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Robert Marko <robert.marko@sartura.hr>
> Cc: Philipp Zabel <p.zabel@pengutronix.de>
> Cc: Alessandro Zummo <redacted>
> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
> Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com>
> Cc: "G. Jaya Kumaran" <redacted>
> Cc: Linus Walleij <redacted>
> Cc: Oleksij Rempel <o.rempel@pengutronix.de>
> Cc: ChiYuan Huang <redacted>
> Cc: Wei Xu <xuwei5@hisilicon.com>
> Cc: Dilip Kota <redacted>
> Cc: Karol Gugala <kgugala@antmicro.com>
> Cc: Mateusz Holenko <mholenko@antmicro.com>
> Cc: Olivier Moysan <redacted>
> Cc: Peter Ujfalusi <redacted>
> Cc: <redacted>
> Cc: <redacted>
> Cc: <redacted>
> Cc: <redacted>
> Cc: <redacted>
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
>  .../display/allwinner,sun8i-a83t-dw-hdmi.yaml |  2 --
>  .../display/panel/boe,tv101wum-nl6.yaml       |  1 -
>  .../bindings/media/nxp,imx7-mipi-csi2.yaml    |  2 --
>  .../bindings/media/renesas,drif.yaml          |  1 -
>  .../bindings/net/intel,dwmac-plat.yaml        |  2 --
>  .../bindings/net/intel,ixp4xx-ethernet.yaml   |  2 --
>  .../bindings/net/nfc/samsung,s3fwrn5.yaml     |  3 ---
>  .../devicetree/bindings/net/qca,ar71xx.yaml   | 25 ++++---------------
>  .../regulator/richtek,rt6245-regulator.yaml   |  1 -
>  .../regulator/vqmmc-ipq4019-regulator.yaml    |  1 -
>  .../reset/hisilicon,hi3660-reset.yaml         |  1 -
>  .../bindings/reset/intel,rcu-gw.yaml          |  1 -
[...]

Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>

regards
Philipp
```

## Re: \[PATCH\] dt-bindings: Remove "status" from schema examples

- From: Oleksij Rempel \<o.rempel@pengutronix.de\>
- Date: 2021-07-21 11:16:39 
- Message: https://ratatoskr.run/netdev/2021/07/1453304.md

```text
On Tue, Jul 20, 2021 at 11:20:25AM -0600, Rob Herring wrote:
> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).
> 
> Enabling qca,ar71xx causes a warning, so let's fix the node names:
> 
> Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
>         From schema: schemas/phy/phy-provider.yaml
> 
> Cc: Maxime Ripard <mripard@kernel.org>
> Cc: Chen-Yu Tsai <redacted>
> Cc: Thierry Reding <redacted>
> Cc: Sam Ravnborg <redacted>
> Cc: Rui Miguel Silva <rmfrfs@gmail.com>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Robert Marko <robert.marko@sartura.hr>
> Cc: Philipp Zabel <p.zabel@pengutronix.de>
> Cc: Alessandro Zummo <redacted>
> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
> Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com>
> Cc: "G. Jaya Kumaran" <redacted>
> Cc: Linus Walleij <redacted>
> Cc: Oleksij Rempel <o.rempel@pengutronix.de>
> Cc: ChiYuan Huang <redacted>
> Cc: Wei Xu <xuwei5@hisilicon.com>
> Cc: Dilip Kota <redacted>
> Cc: Karol Gugala <kgugala@antmicro.com>
> Cc: Mateusz Holenko <mholenko@antmicro.com>
> Cc: Olivier Moysan <redacted>
> Cc: Peter Ujfalusi <redacted>
> Cc: <redacted>
> Cc: <redacted>
> Cc: <redacted>
> Cc: <redacted>
> Cc: <redacted>
> Signed-off-by: Rob Herring <robh@kernel.org>


Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>

> ---
>  .../display/allwinner,sun8i-a83t-dw-hdmi.yaml |  2 --
>  .../display/panel/boe,tv101wum-nl6.yaml       |  1 -
>  .../bindings/media/nxp,imx7-mipi-csi2.yaml    |  2 --
>  .../bindings/media/renesas,drif.yaml          |  1 -
>  .../bindings/net/intel,dwmac-plat.yaml        |  2 --
>  .../bindings/net/intel,ixp4xx-ethernet.yaml   |  2 --
>  .../bindings/net/nfc/samsung,s3fwrn5.yaml     |  3 ---
>  .../devicetree/bindings/net/qca,ar71xx.yaml   | 25 ++++---------------
>  .../regulator/richtek,rt6245-regulator.yaml   |  1 -
>  .../regulator/vqmmc-ipq4019-regulator.yaml    |  1 -
>  .../reset/hisilicon,hi3660-reset.yaml         |  1 -
>  .../bindings/reset/intel,rcu-gw.yaml          |  1 -
>  .../bindings/rtc/microcrystal,rv3032.yaml     |  1 -
>  .../soc/litex/litex,soc-controller.yaml       |  1 -
>  .../bindings/sound/st,stm32-sai.yaml          |  2 --
>  .../bindings/sound/ti,j721e-cpb-audio.yaml    |  2 --
>  .../sound/ti,j721e-cpb-ivi-audio.yaml         |  2 --
>  17 files changed, 5 insertions(+), 45 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
> index 5d42d36608d9..4951b5ef5c6a 100644
> --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
> +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
> @@ -174,7 +174,6 @@ examples:
>          phy-names = "phy";
>          pinctrl-names = "default";
>          pinctrl-0 = <&hdmi_pins>;
> -        status = "disabled";
>  
>          ports {
>              #address-cells = <1>;
> @@ -233,7 +232,6 @@ examples:
>          phy-names = "phy";
>          pinctrl-names = "default";
>          pinctrl-0 = <&hdmi_pins>;
> -        status = "disabled";
>  
>          ports {
>              #address-cells = <1>;
> diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> index 38bc1d1b511e..b87a2e28c866 100644
> --- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml
> @@ -70,7 +70,6 @@ examples:
>              avee-supply = <&ppvarp_lcd>;
>              pp1800-supply = <&pp1800_lcd>;
>              backlight = <&backlight_lcd0>;
> -            status = "okay";
>              port {
>                  panel_in: endpoint {
>                      remote-endpoint = <&dsi_out>;
> diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> index 7c09eec78ce5..877183cf4278 100644
> --- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> +++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
> @@ -200,8 +200,6 @@ examples:
>          clock-names = "pclk", "wrap", "phy", "axi";
>          power-domains = <&mipi_pd>;
>  
> -        status = "disabled";
> -
>          ports {
>              #address-cells = <1>;
>              #size-cells = <0>;
> diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> index 2867d11fe156..9403b235e976 100644
> --- a/Documentation/devicetree/bindings/media/renesas,drif.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> @@ -242,7 +242,6 @@ examples:
>                      power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
>                      resets = <&cpg 513>;
>                      renesas,bonding = <&drif11>;
> -                    status = "disabled";
>              };
>  
>              drif11: rif@e6f70000 {
> diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> index c1948ce00081..79fa04f5e40d 100644
> --- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> +++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml
> @@ -116,8 +116,6 @@ examples:
>          snps,mtl-rx-config = <&mtl_rx_setup>;
>          snps,mtl-tx-config = <&mtl_tx_setup>;
>          snps,tso;
> -        status = "okay";
> -
>          mdio0 {
>              #address-cells = <1>;
>              #size-cells = <0>;
> diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
> index f2e91d1bf7d7..378ed2d3b003 100644
> --- a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
> +++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
> @@ -71,7 +71,6 @@ examples:
>      ethernet@c8009000 {
>        compatible = "intel,ixp4xx-ethernet";
>        reg = <0xc8009000 0x1000>;
> -      status = "disabled";
>        queue-rx = <&qmgr 4>;
>        queue-txready = <&qmgr 21>;
>        intel,npe-handle = <&npe 1>;
> @@ -82,7 +81,6 @@ examples:
>      ethernet@c800c000 {
>        compatible = "intel,ixp4xx-ethernet";
>        reg = <0xc800c000 0x1000>;
> -      status = "disabled";
>        queue-rx = <&qmgr 3>;
>        queue-txready = <&qmgr 20>;
>        intel,npe-handle = <&npe 2>;
> diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
> index 081742c2b726..64995cbb0f97 100644
> --- a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
> +++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
> @@ -90,14 +90,11 @@ examples:
>    # UART example on Raspberry Pi
>    - |
>      uart0 {
> -        status = "okay";
> -
>          nfc {
>              compatible = "samsung,s3fwrn82";
>  
>              en-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
>              wake-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
>  
> -            status = "okay";
>          };
>      };
> diff --git a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
> index f0db22645d73..cf4d35edaa1b 100644
> --- a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
> +++ b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml
> @@ -101,8 +101,6 @@ examples:
>  
>          phy-mode = "gmii";
>  
> -        status = "disabled";
> -
>          fixed-link {
>              speed = <1000>;
>              full-duplex;
> @@ -148,32 +146,24 @@ examples:
>                          reg = <0x1>;
>                          phy-handle = <&phy_port0>;
>                          phy-mode = "internal";
> -
> -                        status = "disabled";
>                      };
>  
>                      switch_port2: port@2 {
>                          reg = <0x2>;
>                          phy-handle = <&phy_port1>;
>                          phy-mode = "internal";
> -
> -                        status = "disabled";
>                      };
>  
>                      switch_port3: port@3 {
>                          reg = <0x3>;
>                          phy-handle = <&phy_port2>;
>                          phy-mode = "internal";
> -
> -                        status = "disabled";
>                      };
>  
>                      switch_port4: port@4 {
>                          reg = <0x4>;
>                          phy-handle = <&phy_port3>;
>                          phy-mode = "internal";
> -
> -                        status = "disabled";
>                      };
>                  };
>  
> @@ -183,34 +173,29 @@ examples:
>  
>                      interrupt-parent = <&switch10>;
>  
> -                    phy_port0: phy@0 {
> +                    phy_port0: ethernet-phy@0 {
>                          reg = <0x0>;
>                          interrupts = <0>;
> -                        status = "disabled";
>                      };
>  
> -                    phy_port1: phy@1 {
> +                    phy_port1: ethernet-phy@1 {
>                          reg = <0x1>;
>                          interrupts = <0>;
> -                        status = "disabled";
>                      };
>  
> -                    phy_port2: phy@2 {
> +                    phy_port2: ethernet-phy@2 {
>                          reg = <0x2>;
>                          interrupts = <0>;
> -                        status = "disabled";
>                      };
>  
> -                    phy_port3: phy@3 {
> +                    phy_port3: ethernet-phy@3 {
>                          reg = <0x3>;
>                          interrupts = <0>;
> -                        status = "disabled";
>                      };
>  
> -                    phy_port4: phy@4 {
> +                    phy_port4: ethernet-phy@4 {
>                          reg = <0x4>;
>                          interrupts = <0>;
> -                        status = "disabled";
>                      };
>                  };
>              };
> diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
> index 796ceac87445..e983d0e70c9b 100644
> --- a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
> @@ -77,7 +77,6 @@ examples:
>  
>        rt6245@34 {
>          compatible = "richtek,rt6245";
> -        status = "okay";
>          reg = <0x34>;
>          enable-gpios = <&gpio26 2 0>;
>  
> diff --git a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
> index 6f45582c914e..dd7a2f92634c 100644
> --- a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
> +++ b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
> @@ -39,6 +39,5 @@ examples:
>        regulator-min-microvolt = <1500000>;
>        regulator-max-microvolt = <3000000>;
>        regulator-always-on;
> -      status = "disabled";
>      };
>  ...
> diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
> index 9bf40952e5b7..b0c41ab1a746 100644
> --- a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
> +++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml
> @@ -72,6 +72,5 @@ examples:
>          resets = <&iomcu_rst 0x20 3>;
>          pinctrl-names = "default";
>          pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
> -        status = "disabled";
>      };
>  ...
> diff --git a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> index 6b2d56cc3f38..13bf6bb3f097 100644
> --- a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> +++ b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml
> @@ -57,7 +57,6 @@ examples:
>      };
>  
>      pwm: pwm@e0d00000 {
> -        status = "disabled";
>          compatible = "intel,lgm-pwm";
>          reg = <0xe0d00000 0x30>;
>          clocks = <&cgu0 1>;
> diff --git a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
> index a2c55303810d..9593840a4a2b 100644
> --- a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
> +++ b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
> @@ -53,7 +53,6 @@ examples:
>          rtc@51 {
>              compatible = "microcrystal,rv3032";
>              reg = <0x51>;
> -            status = "okay";
>              pinctrl-0 = <&rtc_nint_pins>;
>              interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>;
>              trickle-resistor-ohms = <7000>;
> diff --git a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
> index c8b57c7fd08c..ecae9fa8561b 100644
> --- a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
> +++ b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml
> @@ -35,7 +35,6 @@ examples:
>      soc_ctrl0: soc-controller@f0000000 {
>          compatible = "litex,soc-controller";
>          reg = <0xf0000000 0xc>;
> -        status = "okay";
>      };
>  
>  ...
> diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> index 06e83461705c..f97132400bb6 100644
> --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> @@ -180,7 +180,6 @@ examples:
>        pinctrl-names = "default", "sleep";
>        pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
>        pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
> -      status = "okay";
>  
>        sai2a: audio-controller@4400b004 {
>          #sound-dai-cells = <0>;
> @@ -190,7 +189,6 @@ examples:
>          dma-names = "tx";
>          clocks = <&rcc SAI2_K>;
>          clock-names = "sai_ck";
> -        status = "okay";
>        };
>      };
>  
> diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
> index ec06789b21df..6806f53a4aed 100644
> --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
> +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
> @@ -127,8 +127,6 @@ examples:
>          compatible = "ti,j721e-cpb-audio";
>          model = "j721e-cpb";
>  
> -        status = "okay";
> -
>          ti,cpb-mcasp = <&mcasp10>;
>          ti,cpb-codec = <&pcm3168a_1>;
>  
> diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
> index ee9f960de36b..859d369c71e2 100644
> --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
> +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml
> @@ -119,8 +119,6 @@ examples:
>          compatible = "ti,j721e-cpb-ivi-audio";
>          model = "j721e-cpb-ivi";
>  
> -        status = "okay";
> -
>          ti,cpb-mcasp = <&mcasp10>;
>          ti,cpb-codec = <&pcm3168a_1>;
>  
> -- 
> 2.27.0
> 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
```

## Re: \[PATCH\] dt-bindings: Remove "status" from schema examples

- From: Rob Herring \<robh@kernel.org\>
- Date: 2021-07-21 13:49:53 
- Message: https://ratatoskr.run/netdev/2021/07/1453453.md

```text
On Wed, Jul 21, 2021 at 2:33 AM Philipp Zabel [ref] wrote:
>
> Hi Rob,
>
> On Tue, 2021-07-20 at 11:20 -0600, Rob Herring wrote:
> > There's no reason to have "status" properties in examples. "okay" is the
> > default, and "disabled" turns off some schema checks ('required'
> > specifically).
>
> Is this documented somewhere? If not, should it be? (Maybe in writing-
> schema.rst -> Schema Contents -> examples?)

I don't think it is. I'm writing a schema for it which works for both
those that read documentation and those that don't.

Rob
```

## Re: \[PATCH\] dt-bindings: Remove "status" from schema examples

- From: Linus Walleij \<hidden\>
- Date: 2021-07-21 14:26:49 
- Message: https://ratatoskr.run/netdev/2021/07/1453482.md

```text
On Tue, Jul 20, 2021 at 7:20 PM Rob Herring [ref] wrote:

> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).

All of mine are mistakes anyway.
Reviewed-by: Linus Walleij <redacted>

Thanks for fixing this up.

Yours,
Linus Walleij
```

## Re: \[PATCH\] dt-bindings: Remove "status" from schema examples

- From: Rob Herring \<robh@kernel.org\>
- Date: 2021-07-23 21:18:42 
- Message: https://ratatoskr.run/netdev/2021/07/1456337.md

```text
On Tue, 20 Jul 2021 11:20:25 -0600, Rob Herring wrote:
> There's no reason to have "status" properties in examples. "okay" is the
> default, and "disabled" turns off some schema checks ('required'
> specifically).
> 
> Enabling qca,ar71xx causes a warning, so let's fix the node names:
> 
> Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property
>         From schema: schemas/phy/phy-provider.yaml
> 
> Cc: Maxime Ripard <mripard@kernel.org>
> Cc: Chen-Yu Tsai <redacted>
> Cc: Thierry Reding <redacted>
> Cc: Sam Ravnborg <redacted>
> Cc: Rui Miguel Silva <rmfrfs@gmail.com>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Robert Marko <robert.marko@sartura.hr>
> Cc: Philipp Zabel <p.zabel@pengutronix.de>
> Cc: Alessandro Zummo <redacted>
> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
> Cc: Ramesh Shanmugasundaram <rashanmu@gmail.com>
> Cc: "G. Jaya Kumaran" <redacted>
> Cc: Linus Walleij <redacted>
> Cc: Oleksij Rempel <o.rempel@pengutronix.de>
> Cc: ChiYuan Huang <redacted>
> Cc: Wei Xu <xuwei5@hisilicon.com>
> Cc: Dilip Kota <redacted>
> Cc: Karol Gugala <kgugala@antmicro.com>
> Cc: Mateusz Holenko <mholenko@antmicro.com>
> Cc: Olivier Moysan <redacted>
> Cc: Peter Ujfalusi <redacted>
> Cc: <redacted>
> Cc: <redacted>
> Cc: <redacted>
> Cc: <redacted>
> Cc: <redacted>
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
>  .../display/allwinner,sun8i-a83t-dw-hdmi.yaml |  2 --
>  .../display/panel/boe,tv101wum-nl6.yaml       |  1 -
>  .../bindings/media/nxp,imx7-mipi-csi2.yaml    |  2 --
>  .../bindings/media/renesas,drif.yaml          |  1 -
>  .../bindings/net/intel,dwmac-plat.yaml        |  2 --
>  .../bindings/net/intel,ixp4xx-ethernet.yaml   |  2 --
>  .../bindings/net/nfc/samsung,s3fwrn5.yaml     |  3 ---
>  .../devicetree/bindings/net/qca,ar71xx.yaml   | 25 ++++---------------
>  .../regulator/richtek,rt6245-regulator.yaml   |  1 -
>  .../regulator/vqmmc-ipq4019-regulator.yaml    |  1 -
>  .../reset/hisilicon,hi3660-reset.yaml         |  1 -
>  .../bindings/reset/intel,rcu-gw.yaml          |  1 -
>  .../bindings/rtc/microcrystal,rv3032.yaml     |  1 -
>  .../soc/litex/litex,soc-controller.yaml       |  1 -
>  .../bindings/sound/st,stm32-sai.yaml          |  2 --
>  .../bindings/sound/ti,j721e-cpb-audio.yaml    |  2 --
>  .../sound/ti,j721e-cpb-ivi-audio.yaml         |  2 --
>  17 files changed, 5 insertions(+), 45 deletions(-)
> 

Applied, thanks!
```
