[PATCH] ipvlan: Add handling of NETDEV_UP events

Subsystems: networking drivers, the rest

STALE1860d

2 messages, 2 authors, 2021-07-29 · open the first message on its own page

[PATCH] ipvlan: Add handling of NETDEV_UP events

From: Di Zhu <hidden>
Date: 2021-07-29 13:19:43

When an ipvlan device is created on a bond device, the link state
of the ipvlan device may be abnormal. This is because bonding device
allows to add physical network card device in the down state and so
NETDEV_CHANGE event will not be notified to other listeners, so ipvlan
has no chance to update its link status.

The following steps can cause such problems:
	1) bond0 is down
	2) ip link add link bond0 name ipvlan type ipvlan mode l2
	3) echo +enp2s7 >/sys/class/net/bond0/bonding/slaves
	4) ip link set bond0 up

After these steps, use ip link command, we found ipvlan has NO-CARRIER:
  ipvlan@bond0: <NO-CARRIER, BROADCAST,MULTICAST,UP,M-DOWN> mtu ...>

We can deal with this problem like VLAN: Add handling of NETDEV_UP
events. If we receive NETDEV_UP event, we will update the link status
of the ipvlan.

Signed-off-by: Di Zhu <redacted>
---
 drivers/net/ipvlan/ipvlan_main.c | 1 +
 1 file changed, 1 insertion(+)
diff --git a/drivers/net/ipvlan/ipvlan_main.c b/drivers/net/ipvlan/ipvlan_main.c
index a707502a0c0f..c0b21a5580d5 100644
--- a/drivers/net/ipvlan/ipvlan_main.c
+++ b/drivers/net/ipvlan/ipvlan_main.c
@@ -732,6 +732,7 @@ static int ipvlan_device_event(struct notifier_block *unused,
 	port = ipvlan_port_get_rtnl(dev);
 
 	switch (event) {
+	case NETDEV_UP:
 	case NETDEV_CHANGE:
 		list_for_each_entry(ipvlan, &port->ipvlans, pnode)
 			netif_stacked_transfer_operstate(ipvlan->phy_dev,
-- 
2.27.0

Re: [PATCH] ipvlan: Add handling of NETDEV_UP events

From: patchwork-bot+netdevbpf@kernel.org
Date: 2021-07-29 21:20:13

Hello:

This patch was applied to netdev/net-next.git (refs/heads/master):

On Thu, 29 Jul 2021 21:19:30 +0800 you wrote:
When an ipvlan device is created on a bond device, the link state
of the ipvlan device may be abnormal. This is because bonding device
allows to add physical network card device in the down state and so
NETDEV_CHANGE event will not be notified to other listeners, so ipvlan
has no chance to update its link status.

The following steps can cause such problems:
	1) bond0 is down
	2) ip link add link bond0 name ipvlan type ipvlan mode l2
	3) echo +enp2s7 >/sys/class/net/bond0/bonding/slaves
	4) ip link set bond0 up

[...]
Here is the summary with links:
  - ipvlan: Add handling of NETDEV_UP events
    https://git.kernel.org/netdev/net-next/c/57fb346cc7d0

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help