[PATCH RFC net-next] net: phy: marvell10g: add downshift tunable support
From: Russell King <hidden>
Date: 2021-07-20 13:39:41
Add support for the downshift tunable for the Marvell 88x3310 PHY. Downshift is only usable with firmware 0.3.5.0 and later. Signed-off-by: Russell King <redacted> --- It would be useful to have views on the "FIXME" comment in this patch please. Thanks. drivers/net/phy/marvell10g.c | 87 +++++++++++++++++++++++++++++++++++- 1 file changed, 86 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 0b7cae118ad7..0c9e7e1fab91 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c@@ -22,6 +22,7 @@ * If both the fiber and copper ports are connected, the first to gain * link takes priority and the other port is completely locked out. */ +#include <linux/bitfield.h> #include <linux/ctype.h> #include <linux/delay.h> #include <linux/hwmon.h>
@@ -33,6 +34,8 @@ #define MV_PHY_ALASKA_NBT_QUIRK_MASK 0xfffffffe #define MV_PHY_ALASKA_NBT_QUIRK_REV (MARVELL_PHY_ID_88X3310 | 0xa) +#define MV_VERSION(a,b,c,d) ((a) << 24 | (b) << 16 | (c) << 8 | (d)) + enum { MV_PMA_FW_VER0 = 0xc011, MV_PMA_FW_VER1 = 0xc012,
@@ -62,6 +65,15 @@ enum { MV_PCS_CSCR1_MDIX_MDIX = 0x0020, MV_PCS_CSCR1_MDIX_AUTO = 0x0060, + MV_PCS_DSC1 = 0x8003, + MV_PCS_DSC1_ENABLE = BIT(9), + MV_PCS_DSC1_10GBT = 0x01c0, + MV_PCS_DSC1_1GBR = 0x0038, + MV_PCS_DSC1_100BTX = 0x0007, + MV_PCS_DSC2 = 0x8004, + MV_PCS_DSC2_2P5G = 0xf000, + MV_PCS_DSC2_5G = 0x0f00, + MV_PCS_CSSR1 = 0x8008, MV_PCS_CSSR1_SPD1_MASK = 0xc000, MV_PCS_CSSR1_SPD1_SPD2 = 0xc000,
@@ -330,6 +342,66 @@ static int mv3310_reset(struct phy_device *phydev, u32 unit) 5000, 100000, true); } +static int mv3310_get_downshift(struct phy_device *phydev, u8 *ds) +{ + struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev); + int val; + + if (priv->firmware_ver < MV_VERSION(0,3,5,0)) + return -EOPNOTSUPP; + + val = phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_DSC1); + if (val < 0) + return val; + + if (val & MV_PCS_DSC1_ENABLE) + /* assume that all fields are the same */ + *ds = 1 + FIELD_GET(MV_PCS_DSC1_10GBT, (u16)val); + else + *ds = DOWNSHIFT_DEV_DISABLE; + + return 0; +} + +static int mv3310_set_downshift(struct phy_device *phydev, u8 ds) +{ + struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev); + u16 val; + int err; + + /* Fails to downshift with v0.3.5.0 and earlier */ + if (priv->firmware_ver < MV_VERSION(0,3,5,0)) + return -EOPNOTSUPP; + + if (ds == DOWNSHIFT_DEV_DISABLE) + return phy_clear_bits_mmd(phydev, MDIO_MMD_PCS, MV_PCS_DSC1, + MV_PCS_DSC1_ENABLE); + + /* FIXME: The default is disabled, so should we disable? */ + if (ds == DOWNSHIFT_DEV_DEFAULT_COUNT) + ds = 2; + + if (ds > 8) + return -E2BIG; + + ds -= 1; + val = FIELD_PREP(MV_PCS_DSC2_2P5G, ds); + val |= FIELD_PREP(MV_PCS_DSC2_5G, ds); + err = phy_modify_mmd(phydev, MDIO_MMD_PCS, MV_PCS_DSC2, + MV_PCS_DSC2_2P5G | MV_PCS_DSC2_5G, val); + if (err < 0) + return err; + + val = MV_PCS_DSC1_ENABLE; + val |= FIELD_PREP(MV_PCS_DSC1_10GBT, ds); + val |= FIELD_PREP(MV_PCS_DSC1_1GBR, ds); + val |= FIELD_PREP(MV_PCS_DSC1_100BTX, ds); + + return phy_modify_mmd(phydev, MDIO_MMD_PCS, MV_PCS_DSC1, + MV_PCS_DSC1_ENABLE | MV_PCS_DSC1_10GBT | + MV_PCS_DSC1_1GBR | MV_PCS_DSC1_100BTX, val); +} + static int mv3310_get_edpd(struct phy_device *phydev, u16 *edpd) { int val;
@@ -616,7 +688,16 @@ static int mv3310_config_init(struct phy_device *phydev) } /* Enable EDPD mode - saving 600mW */ - return mv3310_set_edpd(phydev, ETHTOOL_PHY_EDPD_DFLT_TX_MSECS); + err = mv3310_set_edpd(phydev, ETHTOOL_PHY_EDPD_DFLT_TX_MSECS); + if (err) + return err; + + /* Allow downshift */ + err = mv3310_set_downshift(phydev, DOWNSHIFT_DEV_DEFAULT_COUNT); + if (err && err != -EOPNOTSUPP) + return err; + + return 0; } static int mv3310_get_features(struct phy_device *phydev)
@@ -886,6 +967,8 @@ static int mv3310_get_tunable(struct phy_device *phydev, struct ethtool_tunable *tuna, void *data) { switch (tuna->id) { + case ETHTOOL_PHY_DOWNSHIFT: + return mv3310_get_downshift(phydev, data); case ETHTOOL_PHY_EDPD: return mv3310_get_edpd(phydev, data); default:
@@ -897,6 +980,8 @@ static int mv3310_set_tunable(struct phy_device *phydev, struct ethtool_tunable *tuna, const void *data) { switch (tuna->id) { + case ETHTOOL_PHY_DOWNSHIFT: + return mv3310_set_downshift(phydev, *(u8 *)data); case ETHTOOL_PHY_EDPD: return mv3310_set_edpd(phydev, *(u16 *)data); default:
--
2.20.1