[PATCH net-next] tipc: keep the skb in rcv queue until the whole data is read

Subsystems: networking [general], the rest, tipc network layer

STALE1875d REVIEWED: 1 (1M)

1 review trailer (1 from subsystem maintainers).

2 messages, 2 authors, 2021-07-17 · open the first message on its own page

[PATCH net-next] tipc: keep the skb in rcv queue until the whole data is read

From: Xin Long <lucien.xin@gmail.com>
Date: 2021-07-16 21:44:17

Currently, when userspace reads a datagram with a buffer that is
smaller than this datagram, the data will be truncated and only
part of it can be received by users. It doesn't seem right that
users don't know the datagram size and have to use a huge buffer
to read it to avoid the truncation.

This patch to fix it by keeping the skb in rcv queue until the
whole data is read by users. Only the last msg of the datagram
will be marked with MSG_EOR, just as TCP/SCTP does.

Note that this will work as above only when MSG_EOR is set in the
flags parameter of recvmsg(), so that it won't break any old user
applications.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
---
 net/tipc/socket.c | 36 +++++++++++++++++++++++++++---------
 1 file changed, 27 insertions(+), 9 deletions(-)
diff --git a/net/tipc/socket.c b/net/tipc/socket.c
index 34a97ea36cc8..9b0b311c7ec1 100644
--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -1880,6 +1880,7 @@ static int tipc_recvmsg(struct socket *sock, struct msghdr *m,
 	bool connected = !tipc_sk_type_connectionless(sk);
 	struct tipc_sock *tsk = tipc_sk(sk);
 	int rc, err, hlen, dlen, copy;
+	struct tipc_skb_cb *skb_cb;
 	struct sk_buff_head xmitq;
 	struct tipc_msg *hdr;
 	struct sk_buff *skb;
@@ -1903,6 +1904,7 @@ static int tipc_recvmsg(struct socket *sock, struct msghdr *m,
 		if (unlikely(rc))
 			goto exit;
 		skb = skb_peek(&sk->sk_receive_queue);
+		skb_cb = TIPC_SKB_CB(skb);
 		hdr = buf_msg(skb);
 		dlen = msg_data_sz(hdr);
 		hlen = msg_hdr_sz(hdr);
@@ -1922,18 +1924,33 @@ static int tipc_recvmsg(struct socket *sock, struct msghdr *m,
 
 	/* Capture data if non-error msg, otherwise just set return value */
 	if (likely(!err)) {
-		copy = min_t(int, dlen, buflen);
-		if (unlikely(copy != dlen))
-			m->msg_flags |= MSG_TRUNC;
-		rc = skb_copy_datagram_msg(skb, hlen, m, copy);
+		int offset = skb_cb->bytes_read;
+
+		copy = min_t(int, dlen - offset, buflen);
+		rc = skb_copy_datagram_msg(skb, hlen + offset, m, copy);
+		if (unlikely(rc))
+			goto exit;
+		if (unlikely(offset + copy < dlen)) {
+			if (flags & MSG_EOR) {
+				if (!(flags & MSG_PEEK))
+					skb_cb->bytes_read = offset + copy;
+			} else {
+				m->msg_flags |= MSG_TRUNC;
+				skb_cb->bytes_read = 0;
+			}
+		} else {
+			if (flags & MSG_EOR)
+				m->msg_flags |= MSG_EOR;
+			skb_cb->bytes_read = 0;
+		}
 	} else {
 		copy = 0;
 		rc = 0;
-		if (err != TIPC_CONN_SHUTDOWN && connected && !m->msg_control)
+		if (err != TIPC_CONN_SHUTDOWN && connected && !m->msg_control) {
 			rc = -ECONNRESET;
+			goto exit;
+		}
 	}
-	if (unlikely(rc))
-		goto exit;
 
 	/* Mark message as group event if applicable */
 	if (unlikely(grp_evt)) {
@@ -1956,9 +1973,10 @@ static int tipc_recvmsg(struct socket *sock, struct msghdr *m,
 		tipc_node_distr_xmit(sock_net(sk), &xmitq);
 	}
 
-	tsk_advance_rx_queue(sk);
+	if (!skb_cb->bytes_read)
+		tsk_advance_rx_queue(sk);
 
-	if (likely(!connected))
+	if (likely(!connected) || skb_cb->bytes_read)
 		goto exit;
 
 	/* Send connection flow control advertisement when applicable */
-- 
2.27.0

Re: [PATCH net-next] tipc: keep the skb in rcv queue until the whole data is read

From: patchwork-bot+netdevbpf@kernel.org
Date: 2021-07-17 00:30:12

Hello:

This patch was applied to netdev/net-next.git (refs/heads/master):

On Fri, 16 Jul 2021 17:44:07 -0400 you wrote:
Currently, when userspace reads a datagram with a buffer that is
smaller than this datagram, the data will be truncated and only
part of it can be received by users. It doesn't seem right that
users don't know the datagram size and have to use a huge buffer
to read it to avoid the truncation.

This patch to fix it by keeping the skb in rcv queue until the
whole data is read by users. Only the last msg of the datagram
will be marked with MSG_EOR, just as TCP/SCTP does.

[...]
Here is the summary with links:
  - [net-next] tipc: keep the skb in rcv queue until the whole data is read
    https://git.kernel.org/netdev/net-next/c/f4919ff59c28

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help