[PATCH net 0/3] cxgb4: bug fixes for ethtool flash ops

STALE1919d

5 messages, 2 authors, 2021-06-11 · open the first message on its own page

[PATCH net 0/3] cxgb4: bug fixes for ethtool flash ops

From: Rahul Lakkireddy <hidden>
Date: 2021-06-11 08:48:56

This series of patches add bug fixes in ethtool flash operations.

Patch 1 fixes an endianness issue when writing boot image to flash
after the device ID has been updated.

Patch 2 fixes sleep in atomic when writing PHY firmware to flash.

Patch 3 fixes issue with PHY firmware image not getting written to
flash when chip is still running.

Thanks,
Rahul

Rahul Lakkireddy (3):
  cxgb4: fix endianness when flashing boot image
  cxgb4: fix sleep in atomic when flashing PHY firmware
  cxgb4: halt chip before flashing PHY firmware image

 .../ethernet/chelsio/cxgb4/cxgb4_ethtool.c    | 24 ++++++++--
 .../net/ethernet/chelsio/cxgb4/cxgb4_main.c   |  2 -
 drivers/net/ethernet/chelsio/cxgb4/t4_hw.c    | 46 ++++++++++++-------
 3 files changed, 48 insertions(+), 24 deletions(-)

-- 
2.27.0

[PATCH net 1/3] cxgb4: fix endianness when flashing boot image

From: Rahul Lakkireddy <hidden>
Date: 2021-06-11 08:48:59

Boot images are copied to memory and updated with current underlying
device ID before flashing them to adapter. Ensure the updated images
are always flashed in Big Endian to allow the firmware to read the
new images during boot properly.

Fixes: 550883558f17 ("cxgb4: add support to flash boot image")
Signed-off-by: Rahul Lakkireddy <redacted>
---
 drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 44 +++++++++++++---------
 1 file changed, 27 insertions(+), 17 deletions(-)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index 9428ef1f04a8..1293505025c1 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -3060,16 +3060,19 @@ int t4_read_flash(struct adapter *adapter, unsigned int addr,
  *	@addr: the start address to write
  *	@n: length of data to write in bytes
  *	@data: the data to write
+ *	@byte_oriented: whether to store data as bytes or as words
  *
  *	Writes up to a page of data (256 bytes) to the serial flash starting
  *	at the given address.  All the data must be written to the same page.
+ *	If @byte_oriented is set the write data is stored as byte stream
+ *	(i.e. matches what on disk), otherwise in big-endian.
  */
 static int t4_write_flash(struct adapter *adapter, unsigned int addr,
-			  unsigned int n, const u8 *data)
+			  unsigned int n, const u8 *data, bool byte_oriented)
 {
-	int ret;
-	u32 buf[64];
 	unsigned int i, c, left, val, offset = addr & 0xff;
+	u32 buf[64];
+	int ret;
 
 	if (addr >= adapter->params.sf_size || offset + n > SF_PAGE_SIZE)
 		return -EINVAL;
@@ -3080,10 +3083,14 @@ static int t4_write_flash(struct adapter *adapter, unsigned int addr,
 	    (ret = sf1_write(adapter, 4, 1, 1, val)) != 0)
 		goto unlock;
 
-	for (left = n; left; left -= c) {
+	for (left = n; left; left -= c, data += c) {
 		c = min(left, 4U);
-		for (val = 0, i = 0; i < c; ++i)
-			val = (val << 8) + *data++;
+		for (val = 0, i = 0; i < c; ++i) {
+			if (byte_oriented)
+				val = (val << 8) + data[i];
+			else
+				val = (val << 8) + data[c - i - 1];
+		}
 
 		ret = sf1_write(adapter, c, c != left, 1, val);
 		if (ret)
@@ -3096,7 +3103,8 @@ static int t4_write_flash(struct adapter *adapter, unsigned int addr,
 	t4_write_reg(adapter, SF_OP_A, 0);    /* unlock SF */
 
 	/* Read the page to verify the write succeeded */
-	ret = t4_read_flash(adapter, addr & ~0xff, ARRAY_SIZE(buf), buf, 1);
+	ret = t4_read_flash(adapter, addr & ~0xff, ARRAY_SIZE(buf), buf,
+			    byte_oriented);
 	if (ret)
 		return ret;
 
@@ -3692,7 +3700,7 @@ int t4_load_fw(struct adapter *adap, const u8 *fw_data, unsigned int size)
 	 */
 	memcpy(first_page, fw_data, SF_PAGE_SIZE);
 	((struct fw_hdr *)first_page)->fw_ver = cpu_to_be32(0xffffffff);
-	ret = t4_write_flash(adap, fw_start, SF_PAGE_SIZE, first_page);
+	ret = t4_write_flash(adap, fw_start, SF_PAGE_SIZE, first_page, true);
 	if (ret)
 		goto out;
 
@@ -3700,14 +3708,14 @@ int t4_load_fw(struct adapter *adap, const u8 *fw_data, unsigned int size)
 	for (size -= SF_PAGE_SIZE; size; size -= SF_PAGE_SIZE) {
 		addr += SF_PAGE_SIZE;
 		fw_data += SF_PAGE_SIZE;
-		ret = t4_write_flash(adap, addr, SF_PAGE_SIZE, fw_data);
+		ret = t4_write_flash(adap, addr, SF_PAGE_SIZE, fw_data, true);
 		if (ret)
 			goto out;
 	}
 
-	ret = t4_write_flash(adap,
-			     fw_start + offsetof(struct fw_hdr, fw_ver),
-			     sizeof(hdr->fw_ver), (const u8 *)&hdr->fw_ver);
+	ret = t4_write_flash(adap, fw_start + offsetof(struct fw_hdr, fw_ver),
+			     sizeof(hdr->fw_ver), (const u8 *)&hdr->fw_ver,
+			     true);
 out:
 	if (ret)
 		dev_err(adap->pdev_dev, "firmware download failed, error %d\n",
@@ -10208,7 +10216,7 @@ int t4_load_cfg(struct adapter *adap, const u8 *cfg_data, unsigned int size)
 			n = size - i;
 		else
 			n = SF_PAGE_SIZE;
-		ret = t4_write_flash(adap, addr, n, cfg_data);
+		ret = t4_write_flash(adap, addr, n, cfg_data, true);
 		if (ret)
 			goto out;
 
@@ -10677,13 +10685,14 @@ int t4_load_boot(struct adapter *adap, u8 *boot_data,
 	for (size -= SF_PAGE_SIZE; size; size -= SF_PAGE_SIZE) {
 		addr += SF_PAGE_SIZE;
 		boot_data += SF_PAGE_SIZE;
-		ret = t4_write_flash(adap, addr, SF_PAGE_SIZE, boot_data);
+		ret = t4_write_flash(adap, addr, SF_PAGE_SIZE, boot_data,
+				     false);
 		if (ret)
 			goto out;
 	}
 
 	ret = t4_write_flash(adap, boot_sector, SF_PAGE_SIZE,
-			     (const u8 *)header);
+			     (const u8 *)header, false);
 
 out:
 	if (ret)
@@ -10758,7 +10767,7 @@ int t4_load_bootcfg(struct adapter *adap, const u8 *cfg_data, unsigned int size)
 	for (i = 0; i < size; i += SF_PAGE_SIZE) {
 		n = min_t(u32, size - i, SF_PAGE_SIZE);
 
-		ret = t4_write_flash(adap, addr, n, cfg_data);
+		ret = t4_write_flash(adap, addr, n, cfg_data, false);
 		if (ret)
 			goto out;
 
@@ -10770,7 +10779,8 @@ int t4_load_bootcfg(struct adapter *adap, const u8 *cfg_data, unsigned int size)
 	for (i = 0; i < npad; i++) {
 		u8 data = 0;
 
-		ret = t4_write_flash(adap, cfg_addr + size + i, 1, &data);
+		ret = t4_write_flash(adap, cfg_addr + size + i, 1, &data,
+				     false);
 		if (ret)
 			goto out;
 	}
-- 
2.27.0

[PATCH net 2/3] cxgb4: fix sleep in atomic when flashing PHY firmware

From: Rahul Lakkireddy <hidden>
Date: 2021-06-11 08:49:02

Before writing new PHY firmware to on-chip memory, driver queries
firmware for current running PHY firmware version, which can result
in sleep waiting for reply. So, move spinlock closer to the actual
on-chip memory write operation, instead of taking it at the callers.

Fixes: 5fff701c838e ("cxgb4: always sync access when flashing PHY firmware")
Signed-off-by: Rahul Lakkireddy <redacted>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c | 2 --
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c    | 2 --
 drivers/net/ethernet/chelsio/cxgb4/t4_hw.c         | 2 ++
 3 files changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
index 61ea3ec5c3fc..bc2de01d0539 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
@@ -1337,9 +1337,7 @@ static int cxgb4_ethtool_flash_phy(struct net_device *netdev,
 		return ret;
 	}
 
-	spin_lock_bh(&adap->win0_lock);
 	ret = t4_load_phy_fw(adap, MEMWIN_NIC, NULL, data, size);
-	spin_unlock_bh(&adap->win0_lock);
 	if (ret)
 		dev_err(adap->pdev_dev, "Failed to load PHY FW\n");
 
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index 1f601de02e70..762113a04dde 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -4424,10 +4424,8 @@ static int adap_init0_phy(struct adapter *adap)
 
 	/* Load PHY Firmware onto adapter.
 	 */
-	spin_lock_bh(&adap->win0_lock);
 	ret = t4_load_phy_fw(adap, MEMWIN_NIC, phy_info->phy_fw_version,
 			     (u8 *)phyf->data, phyf->size);
-	spin_unlock_bh(&adap->win0_lock);
 	if (ret < 0)
 		dev_err(adap->pdev_dev, "PHY Firmware transfer error %d\n",
 			-ret);
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index 1293505025c1..a0555f4d76fc 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -3820,9 +3820,11 @@ int t4_load_phy_fw(struct adapter *adap, int win,
 	/* Copy the supplied PHY Firmware image to the adapter memory location
 	 * allocated by the adapter firmware.
 	 */
+	spin_lock_bh(&adap->win0_lock);
 	ret = t4_memory_rw(adap, win, mtype, maddr,
 			   phy_fw_size, (__be32 *)phy_fw_data,
 			   T4_MEMORY_WRITE);
+	spin_unlock_bh(&adap->win0_lock);
 	if (ret)
 		return ret;
 
-- 
2.27.0

[PATCH net 3/3] cxgb4: halt chip before flashing PHY firmware image

From: Rahul Lakkireddy <hidden>
Date: 2021-06-11 08:49:04

When using firmware-assisted PHY firmware image write to flash,
halt the chip before beginning the flash write operation to allow
the running firmware to store the image persistently. Otherwise,
the running firmware will only store the PHY image in local on-chip
RAM, which will be lost after next reset.

Fixes: 4ee339e1e92a ("cxgb4: add support to flash PHY image")
Signed-off-by: Rahul Lakkireddy <redacted>
---
 .../ethernet/chelsio/cxgb4/cxgb4_ethtool.c    | 22 ++++++++++++++++---
 1 file changed, 19 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
index bc2de01d0539..df20485b5744 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c
@@ -1337,11 +1337,27 @@ static int cxgb4_ethtool_flash_phy(struct net_device *netdev,
 		return ret;
 	}
 
+	/* We have to RESET the chip/firmware because we need the
+	 * chip in uninitialized state for loading new PHY image.
+	 * Otherwise, the running firmware will only store the PHY
+	 * image in local RAM which will be lost after next reset.
+	 */
+	ret = t4_fw_reset(adap, adap->mbox, PIORSTMODE_F | PIORST_F);
+	if (ret < 0) {
+		dev_err(adap->pdev_dev,
+			"Set FW to RESET for flashing PHY FW failed. ret: %d\n",
+			ret);
+		return ret;
+	}
+
 	ret = t4_load_phy_fw(adap, MEMWIN_NIC, NULL, data, size);
-	if (ret)
-		dev_err(adap->pdev_dev, "Failed to load PHY FW\n");
+	if (ret < 0) {
+		dev_err(adap->pdev_dev, "Failed to load PHY FW. ret: %d\n",
+			ret);
+		return ret;
+	}
 
-	return ret;
+	return 0;
 }
 
 static int cxgb4_ethtool_flash_fw(struct net_device *netdev,
-- 
2.27.0

Re: [PATCH net 0/3] cxgb4: bug fixes for ethtool flash ops

From: patchwork-bot+netdevbpf@kernel.org
Date: 2021-06-11 18:20:08

Hello:

This series was applied to netdev/net.git (refs/heads/master):

On Fri, 11 Jun 2021 12:17:44 +0530 you wrote:
This series of patches add bug fixes in ethtool flash operations.

Patch 1 fixes an endianness issue when writing boot image to flash
after the device ID has been updated.

Patch 2 fixes sleep in atomic when writing PHY firmware to flash.

[...]
Here is the summary with links:
  - [net,1/3] cxgb4: fix endianness when flashing boot image
    https://git.kernel.org/netdev/net/c/42a2039753a7
  - [net,2/3] cxgb4: fix sleep in atomic when flashing PHY firmware
    https://git.kernel.org/netdev/net/c/f046bd0ae15d
  - [net,3/3] cxgb4: halt chip before flashing PHY firmware image
    https://git.kernel.org/netdev/net/c/6d297540f75d

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help