net: phy: DP83822: not able to get a link

Hello,

I just updated a i.MX6 device which uses the DP83822 from 5.4 to 5.10
and can't get a link anymore.

ip addr shows:
1: lo: <LOOPBACK> mtu 65536 qdisc noop qlen 1000
   link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
   link/ether 00:60:65:54:32:10 brd ff:ff:ff:ff:ff:ff

It seems to me that the commit 5dc39fd5ef35 ("net: phy: DP83822: Add
ability to advertise Fiber connection") causes this.
If I revert the following part of this commit, it is working again:

@@ -314,13 +451,85 @@ static int dp83822_phy_reset(struct phy_device *phydev)
 {
  int err;

- err = phy_write(phydev, MII_DP83822_RESET_CTRL, DP83822_HW_RESET);
+ err = phy_write(phydev, MII_DP83822_RESET_CTRL, DP83822_SW_RESET);

Was this change intentional? Because I took a look at the driver
DP83867 which has similar bits to reset the phy and there this wasn't
changed.
Maybe the naming of the defines in case of the DP83822 is a bit misleading?
DP83882:
#define DP83822_HW_RESET BIT(15)
#define DP83822_SW_RESET BIT(14)
datasheet description:
15 Software Reset
14 Digital Restart

DP83867:
#define DP83867_SW_RESET BIT(15)
#define DP83867_SW_RESTART BIT(14)
datasheet description:
15 SW_RESET
14 SW_RESTART

Thanks,
Hannes