[PATCH] wireless: intel: iwlwifi: fw: api: Absolute rudimentary typo fixes in the file power.h
From: Bhaskar Chowdhury <hidden>
Date: 2021-03-17 04:27:34
s/folowing/following/ s/Celsuis/Celsius/ s/temerature/temperature/ ...twice Signed-off-by: Bhaskar Chowdhury <redacted> --- drivers/net/wireless/intel/iwlwifi/fw/api/power.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/power.h b/drivers/net/wireless/intel/iwlwifi/fw/api/power.h
index 798417182d54..f7c7852127d3 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/api/power.h
+++ b/drivers/net/wireless/intel/iwlwifi/fw/api/power.h@@ -54,7 +54,7 @@ struct iwl_ltr_config_cmd_v1 { * @flags: See &enum iwl_ltr_config_flags * @static_long: static LTR Long register value. * @static_short: static LTR Short register value. - * @ltr_cfg_values: LTR parameters table values (in usec) in folowing order: + * @ltr_cfg_values: LTR parameters table values (in usec) in following order: * TX, RX, Short Idle, Long Idle. Used only if %LTR_CFG_FLAG_UPDATE_VALUES * is set. * @ltr_short_idle_timeout: LTR Short Idle timeout (in usec). Used only if
@@ -493,7 +493,7 @@ union iwl_ppag_table_cmd { * Roaming Energy Delta Threshold, otherwise use normal Energy Delta * Threshold. Typical energy threshold is -72dBm. * @bf_temp_threshold: This threshold determines the type of temperature - * filtering (Slow or Fast) that is selected (Units are in Celsuis): + * filtering (Slow or Fast) that is selected (Units are in Celsius): * If the current temperature is above this threshold - Fast filter * will be used, If the current temperature is below this threshold - * Slow filter will be used.
@@ -501,12 +501,12 @@ union iwl_ppag_table_cmd { * calculated for this and the last passed beacon is greater than this * threshold. Zero value means that the temperature change is ignored for * beacon filtering; beacons will not be forced to be sent to driver - * regardless of whether its temerature has been changed. + * regardless of whether its temperature has been changed. * @bf_temp_slow_filter: Send Beacon to driver if delta in temperature values * calculated for this and the last passed beacon is greater than this * threshold. Zero value means that the temperature change is ignored for * beacon filtering; beacons will not be forced to be sent to driver - * regardless of whether its temerature has been changed. + * regardless of whether its temperature has been changed. * @bf_enable_beacon_filter: 1, beacon filtering is enabled; 0, disabled. * @bf_debug_flag: beacon filtering debug configuration * @bf_escape_timer: Send beacons to to driver if no beacons were passed --
2.30.2