# \[PATCH net-next 5/6\] mlxsw: spectrum: Veto sampling if already enabled on port - From: Ido Schimmel \ - Date: 2021-03-29 10:11:10 - List: netdev - Page: https://ratatoskr.run/netdev/2021/03/11200051 - Thread: https://ratatoskr.run/netdev/2021/03/11200047/t.md ```text From: Ido Schimmel The per-port sampling triggers (i.e., ingress / egress) cannot be enabled twice. Meaning, the below configuration will not result in packets being sampled twice: # tc filter add dev swp1 ingress matchall skip_sw action sample rate 100 group 1 # tc filter add dev swp1 ingress matchall skip_sw action sample rate 100 group 1 Therefore, reject such configurations. Fixes: 90f53c53ec4a ("mlxsw: spectrum: Start using sampling triggers hash table") Signed-off-by: Ido Schimmel Reviewed-by: Jiri Pirko --- drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index efc7acb4842c..bca0354482cb 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -2668,6 +2668,11 @@ mlxsw_sp_sample_trigger_params_set(struct mlxsw_sp *mlxsw_sp, return mlxsw_sp_sample_trigger_node_init(mlxsw_sp, &key, params); + if (trigger_node->trigger.local_port) { + NL_SET_ERR_MSG_MOD(extack, "Sampling already enabled on port"); + return -EINVAL; + } + if (trigger_node->params.psample_group != params->psample_group || trigger_node->params.truncate != params->truncate || trigger_node->params.rate != params->rate || -- 2.30.2 ```