[PATCH] can: xilinx_can: Simplify code by using dev_err_probe()

Use already prepared dev_err_probe() introduced by commit a787e5400a1c
("driver core: add device probe log helper").
It simplifies EPROBE_DEFER handling.

Also unify message format for similar error cases.

Signed-off-by: Michal Simek <redacted>
---

 drivers/net/can/xilinx_can.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
index 37fa19c62d73..3b883e607d8b 100644
--- a/drivers/net/can/xilinx_can.c
+++ b/drivers/net/can/xilinx_can.c

@@ -1772,17 +1772,15 @@ static int xcan_probe(struct platform_device *pdev)
 	/* Getting the CAN can_clk info */
 	priv->can_clk = devm_clk_get(&pdev->dev, "can_clk");
 	if (IS_ERR(priv->can_clk)) {
-		if (PTR_ERR(priv->can_clk) != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Device clock not found.\n");
-		ret = PTR_ERR(priv->can_clk);
+		ret = dev_err_probe(&pdev->dev, PTR_ERR(priv->can_clk),
+				    "device clock not found\n");
 		goto err_free;
 	}
 
 	priv->bus_clk = devm_clk_get(&pdev->dev, devtype->bus_clk_name);
 	if (IS_ERR(priv->bus_clk)) {
-		if (PTR_ERR(priv->bus_clk) != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "bus clock not found\n");
-		ret = PTR_ERR(priv->bus_clk);
+		ret = dev_err_probe(&pdev->dev, PTR_ERR(priv->bus_clk),
+				    "bus clock not found\n");
 		goto err_free;
 	}
 

-- 
2.30.0

On 04.02.2021 13:42:48, Michal Simek wrote:

Use already prepared dev_err_probe() introduced by commit a787e5400a1c
("driver core: add device probe log helper").
It simplifies EPROBE_DEFER handling.

Also unify message format for similar error cases.

Signed-off-by: Michal Simek <redacted>

Applied to linux-can-next/testing.

Thanks,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |