[PATCH net] net: phy: micrel: set soft_reset callback to genphy_soft_reset for KSZ8081

Following a similar reinstate for the KSZ9031.

Older kernels would use the genphy_soft_reset if the PHY did not 
implement a .soft_reset.

Bluntly removing that default may expose a lot of situations where 
various PHYs/board implementations won't recover on various changes.
Like with implementation during a 4.9.x to 5.4.x LTS transition.
I think it's a good thing to remove unwanted soft resets but wonder if 
it did open a can of worms?

Atleast this fixes one iMX6 FEC/RMII/8081 combo.

Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset")
Signed-off-by: Christian Melki <redacted>
---

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 54e0d75203da..57f8021b70af 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c

@@ -1295,6 +1295,7 @@ static struct phy_driver ksphy_driver[] = {
  	.driver_data	= &ksz8081_type,
  	.probe		= kszphy_probe,
  	.config_init	= ksz8081_config_init,
+	.soft_reset	= genphy_soft_reset,
  	.config_intr	= kszphy_config_intr,
  	.handle_interrupt = kszphy_handle_interrupt,
  	.get_sset_count = kszphy_get_sset_count,

On Thu, 18 Feb 2021 22:09:32 +0100 Christian Melki wrote:

Following a similar reinstate for the KSZ9031.

Older kernels would use the genphy_soft_reset if the PHY did not 
implement a .soft_reset.

Bluntly removing that default may expose a lot of situations where 
various PHYs/board implementations won't recover on various changes.
Like with implementation during a 4.9.x to 5.4.x LTS transition.
I think it's a good thing to remove unwanted soft resets but wonder if 
it did open a can of worms?

Atleast this fixes one iMX6 FEC/RMII/8081 combo.

Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset")
Signed-off-by: Christian Melki <redacted>

Does not apply to net/master:

https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/

Please rebase and resend.

Please make sure you CC maintainers and other relevant developers 
(you can use ./scripts/get_maintainers.pl $path_to_patch to find them).