[PATCH] net: ethernet: aquantia: Handle error cleanup of start on open
From: Nathan Rossi <hidden>
Date: 2021-02-11 05:19:13
From: Nathan Rossi <redacted> The aq_nic_start function can fail in a variety of cases which leaves the device in broken state. An example case where the start function fails is the request_threaded_irq which can be interrupted, resulting in a EINTR result. This can be manually triggered by bringing the link up (e.g. ip link set up) and triggering a SIGINT on the initiating process (e.g. Ctrl+C). This would put the device into a half configured state. Subsequently bringing the link up again would cause the napi_enable to BUG. In order to correctly clean up the failed attempt to start a device call aq_nic_stop. Signed-off-by: Nathan Rossi <redacted> --- drivers/net/ethernet/aquantia/atlantic/aq_main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/aquantia/atlantic/aq_main.c b/drivers/net/ethernet/aquantia/atlantic/aq_main.c
index 8f70a39099..4af0cd9530 100644
--- a/drivers/net/ethernet/aquantia/atlantic/aq_main.c
+++ b/drivers/net/ethernet/aquantia/atlantic/aq_main.c@@ -71,8 +71,10 @@ static int aq_ndev_open(struct net_device *ndev) goto err_exit; err = aq_nic_start(aq_nic); - if (err < 0) + if (err < 0) { + aq_nic_stop(aq_nic); goto err_exit; + } err_exit: if (err < 0)
--- 2.30.0