# \[PATCH\] net: dsa: lantiq\_gswip: Exclude RMII from modes that report 1 GbE

- From: Aleksander Jan Bajkowski \<hidden\>
- Date: 2021-01-07 20:01:12 
- List: netdev
- Page: https://ratatoskr.run/netdev/2021/01/6227058
- Thread: https://ratatoskr.run/netdev/2021/01/6227058/t.md

```text
Exclude RMII from modes that report 1 GbE support. Reduced MII supports
up to 100 MbE.

Fixes: 14fceff ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Signed-off-by: Aleksander Jan Bajkowski <redacted>
---
 drivers/net/dsa/lantiq_gswip.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index 4b36d89bec06..662e68a0e7e6 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -1436,11 +1436,12 @@ static void gswip_phylink_validate(struct dsa_switch *ds, int port,
 	phylink_set(mask, Pause);
 	phylink_set(mask, Asym_Pause);
 
-	/* With the exclusion of MII and Reverse MII, we support Gigabit,
-	 * including Half duplex
+	/* With the exclusion of MII, Reverse MII and Reduced MII, we
+	 * support Gigabit, including Half duplex
 	 */
 	if (state->interface != PHY_INTERFACE_MODE_MII &&
-	    state->interface != PHY_INTERFACE_MODE_REVMII) {
+	    state->interface != PHY_INTERFACE_MODE_REVMII &&
+	    state->interface != PHY_INTERFACE_MODE_RMII) {
 		phylink_set(mask, 1000baseT_Full);
 		phylink_set(mask, 1000baseT_Half);
 	}
-- 
2.20.1

```
