[PATCH] selftests/bpf: clarify build error if no vmlinux

Subsystems: bpf [general] (safe dynamic programs and tools), bpf [selftests] (test runners & infrastructure), kernel selftest framework, the rest

STALE2119d

4 messages, 2 authors, 2020-12-16 · open the first message on its own page

[PATCH] selftests/bpf: clarify build error if no vmlinux

From: Kamal Mostafa <hidden>
Date: 2020-12-14 20:22:46

If Makefile cannot find any of the vmlinux's in its VMLINUX_BTF_PATHS list,
it tries to run btftool incorrectly, with VMLINUX_BTF unset:

    bpftool btf dump file $(VMLINUX_BTF) format c

Such that the keyword 'format' is misinterpreted as the path to vmlinux.
The resulting build error message is fairly cryptic:

      GEN      vmlinux.h
    Error: failed to load BTF from format: No such file or directory

This patch makes the failure reason clearer by yielding this instead:

    Makefile:...: *** cannot find a vmlinux for VMLINUX_BTF at any of
    "{paths}".  Stop.

Fixes: acbd06206bbb ("selftests/bpf: Add vmlinux.h selftest exercising tracing of syscalls")
Cc: stable@vger.kernel.org # 5.7+
Signed-off-by: Kamal Mostafa <redacted>
---
 tools/testing/selftests/bpf/Makefile | 3 +++
 1 file changed, 3 insertions(+)
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index 542768f5195b..93ed34ef6e3f 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -196,6 +196,9 @@ $(BUILD_DIR)/libbpf $(BUILD_DIR)/bpftool $(BUILD_DIR)/resolve_btfids $(INCLUDE_D
 $(INCLUDE_DIR)/vmlinux.h: $(VMLINUX_BTF) | $(BPFTOOL) $(INCLUDE_DIR)
 ifeq ($(VMLINUX_H),)
 	$(call msg,GEN,,$@)
+ifeq ($(VMLINUX_BTF),)
+$(error cannot find a vmlinux for VMLINUX_BTF at any of "$(VMLINUX_BTF_PATHS)")
+endif
 	$(Q)$(BPFTOOL) btf dump file $(VMLINUX_BTF) format c > $@
 else
 	$(call msg,CP,,$@)
-- 
2.17.1

Re: [PATCH] selftests/bpf: clarify build error if no vmlinux

From: Andrii Nakryiko <hidden>
Date: 2020-12-15 01:38:52

On Mon, Dec 14, 2020 at 12:21 PM Kamal Mostafa [off-list ref] wrote:
quoted hunk
If Makefile cannot find any of the vmlinux's in its VMLINUX_BTF_PATHS list,
it tries to run btftool incorrectly, with VMLINUX_BTF unset:

    bpftool btf dump file $(VMLINUX_BTF) format c

Such that the keyword 'format' is misinterpreted as the path to vmlinux.
The resulting build error message is fairly cryptic:

      GEN      vmlinux.h
    Error: failed to load BTF from format: No such file or directory

This patch makes the failure reason clearer by yielding this instead:

    Makefile:...: *** cannot find a vmlinux for VMLINUX_BTF at any of
    "{paths}".  Stop.

Fixes: acbd06206bbb ("selftests/bpf: Add vmlinux.h selftest exercising tracing of syscalls")
Cc: stable@vger.kernel.org # 5.7+
Signed-off-by: Kamal Mostafa <redacted>
---
 tools/testing/selftests/bpf/Makefile | 3 +++
 1 file changed, 3 insertions(+)
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index 542768f5195b..93ed34ef6e3f 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -196,6 +196,9 @@ $(BUILD_DIR)/libbpf $(BUILD_DIR)/bpftool $(BUILD_DIR)/resolve_btfids $(INCLUDE_D
 $(INCLUDE_DIR)/vmlinux.h: $(VMLINUX_BTF) | $(BPFTOOL) $(INCLUDE_DIR)
 ifeq ($(VMLINUX_H),)
        $(call msg,GEN,,$@)
+ifeq ($(VMLINUX_BTF),)
+$(error cannot find a vmlinux for VMLINUX_BTF at any of "$(VMLINUX_BTF_PATHS)")
+endif
        $(Q)$(BPFTOOL) btf dump file $(VMLINUX_BTF) format c > $@
 else
        $(call msg,CP,,$@)
This handles only one possible case where $(VMLINUX_BTF) is expected.

Given $(VMLINUX_BTF) is now almost mandatory to have (bpf_testmod.ko
is dependent on it, for instance), I think it's acceptable to just add
such a check right after VMLINUX_BTF definition, outside of any
specific rule. The downside is that some unrelated targets (e.g.,
non-test_progs tests) will fail if VMLINUX_BTF is not found, even if
they don't need it, but the most common use case us to build
test_progs, as well as bpf_testmod.ko and runqslower, so I think it's
an OK trade off. Worst case, one can work around such with
VMLINUX_BTF=whatever command-line overload.
--
2.17.1

[PATCH v2] selftests/bpf: clarify build error if no vmlinux

From: Kamal Mostafa <hidden>
Date: 2020-12-15 18:21:31

If Makefile cannot find any of the vmlinux's in its VMLINUX_BTF_PATHS list,
it tries to run btftool incorrectly, with VMLINUX_BTF unset:

    bpftool btf dump file $(VMLINUX_BTF) format c

Such that the keyword 'format' is misinterpreted as the path to vmlinux.
The resulting build error message is fairly cryptic:

      GEN      vmlinux.h
    Error: failed to load BTF from format: No such file or directory

This patch makes the failure reason clearer by yielding this instead:

    Makefile:...: *** cannot find a vmlinux for VMLINUX_BTF at any of
    "{paths}".  Stop.

Fixes: acbd06206bbb ("selftests/bpf: Add vmlinux.h selftest exercising tracing of syscalls")
Cc: stable@vger.kernel.org # 5.7+
Signed-off-by: Kamal Mostafa <redacted>
---

[v2] moves the check to right after the VMLINUX_BTF definition.

 tools/testing/selftests/bpf/Makefile | 3 +++
 1 file changed, 3 insertions(+)
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index 542768f5195b..7ba631f495f7 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -146,6 +146,9 @@ VMLINUX_BTF_PATHS ?= $(if $(O),$(O)/vmlinux)				\
 		     /sys/kernel/btf/vmlinux				\
 		     /boot/vmlinux-$(shell uname -r)
 VMLINUX_BTF ?= $(abspath $(firstword $(wildcard $(VMLINUX_BTF_PATHS))))
+ifeq ($(VMLINUX_BTF),)
+$(error cannot find a vmlinux for VMLINUX_BTF at any of "$(VMLINUX_BTF_PATHS)")
+endif
 
 DEFAULT_BPFTOOL := $(SCRATCH_DIR)/sbin/bpftool
 
-- 
2.17.1

Re: [PATCH v2] selftests/bpf: clarify build error if no vmlinux

From: Andrii Nakryiko <hidden>
Date: 2020-12-16 18:07:43

On Tue, Dec 15, 2020 at 10:20 AM Kamal Mostafa [off-list ref] wrote:
If Makefile cannot find any of the vmlinux's in its VMLINUX_BTF_PATHS list,
it tries to run btftool incorrectly, with VMLINUX_BTF unset:

    bpftool btf dump file $(VMLINUX_BTF) format c

Such that the keyword 'format' is misinterpreted as the path to vmlinux.
The resulting build error message is fairly cryptic:

      GEN      vmlinux.h
    Error: failed to load BTF from format: No such file or directory

This patch makes the failure reason clearer by yielding this instead:

    Makefile:...: *** cannot find a vmlinux for VMLINUX_BTF at any of
    "{paths}".  Stop.

Fixes: acbd06206bbb ("selftests/bpf: Add vmlinux.h selftest exercising tracing of syscalls")
Cc: stable@vger.kernel.org # 5.7+
Signed-off-by: Kamal Mostafa <redacted>
---
Applied to bpf tree, thanks. This conflicted with a67079b03165
("selftests/bpf: fix bpf_testmod.ko recompilation logic"), I resolved
the conflict and capitalized "Cannot" in the error message.
quoted hunk
[v2] moves the check to right after the VMLINUX_BTF definition.

 tools/testing/selftests/bpf/Makefile | 3 +++
 1 file changed, 3 insertions(+)
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index 542768f5195b..7ba631f495f7 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -146,6 +146,9 @@ VMLINUX_BTF_PATHS ?= $(if $(O),$(O)/vmlinux)                                \
                     /sys/kernel/btf/vmlinux                            \
                     /boot/vmlinux-$(shell uname -r)
 VMLINUX_BTF ?= $(abspath $(firstword $(wildcard $(VMLINUX_BTF_PATHS))))
+ifeq ($(VMLINUX_BTF),)
+$(error cannot find a vmlinux for VMLINUX_BTF at any of "$(VMLINUX_BTF_PATHS)")
+endif

 DEFAULT_BPFTOOL := $(SCRATCH_DIR)/sbin/bpftool

--
2.17.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help