# Re: \[PATCH 00/10\] thunderbolt: Add DMA traffic test driver

- From: Yehezkel Bernat \<yehezkelshb@gmail.com\>
- Date: 2020-11-04 18:39:22 
- List: netdev
- Page: https://ratatoskr.run/netdev/2020/11/8875129
- Thread: https://ratatoskr.run/linux-usb/2020/11/8875117/t.md

```text
On Wed, Nov 4, 2020 at 4:00 PM Mika Westerberg
[ref] wrote:
>
> Hi all,
>
> This series adds a new Thunderbolt service driver that can be used on
> manufacturing floor to test that each Thunderbolt/USB4 port is functional.
> It can be done either using a special loopback dongle that has RX and TX
> lanes crossed, or by connecting a cable back to the host (for those who
> don't have these dongles).
>
> This takes advantage of the existing XDomain protocol and creates XDomain
> devices for the loops back to the host where the DMA traffic test driver
> can bind to.
>
> The DMA traffic test driver creates a tunnel through the fabric and then
> sends and receives data frames over the tunnel checking for different
> errors.

For the whole series,

Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com>
```
