[PATCH net] can: j1939: j1939_sk_bind(): return failure if netdev is down

When a netdev down event occurs after a successful call to
j1939_sk_bind(), j1939_netdev_notify() can handle it correctly.

But if the netdev already in down state before calling j1939_sk_bind(),
j1939_sk_release() will stay in wait_event_interruptible() blocked
forever. Because in this case, j1939_netdev_notify() won't be called and
j1939_tp_txtimer() won't call j1939_session_cancel() or other function
to clear session for ENETDOWN error, this lead to mismatch of
j1939_session_get/put() and jsk->skb_pending will never decrease to
zero.

To reproduce it use following commands:
1. ip link add dev vcan0 type vcan
2. j1939acd -r 100,80-120 1122334455667788 vcan0
3. presses ctrl-c and thread will be blocked forever

This patch adds check for ndev->flags in j1939_sk_bind() to avoid this
kind of situation and return with -ENETDOWN.

Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong <redacted>
---
 net/can/j1939/socket.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/net/can/j1939/socket.c b/net/can/j1939/socket.c
index 1be4c89..f239665 100644
--- a/net/can/j1939/socket.c
+++ b/net/can/j1939/socket.c

@@ -475,6 +475,12 @@ static int j1939_sk_bind(struct socket *sock, struct sockaddr *uaddr, int len)
 			goto out_release_sock;
 		}
 
+		if (!(ndev->flags & IFF_UP)) {
+			dev_put(ndev);
+			ret = -ENETDOWN;
+			goto out_release_sock;
+		}
+
 		priv = j1939_netdev_start(ndev);
 		dev_put(ndev);
 		if (IS_ERR(priv)) {

-- 
2.9.5

On Mon, Sep 07, 2020 at 02:31:48PM +0800, Zhang Changzhong wrote:

When a netdev down event occurs after a successful call to
j1939_sk_bind(), j1939_netdev_notify() can handle it correctly.

But if the netdev already in down state before calling j1939_sk_bind(),
j1939_sk_release() will stay in wait_event_interruptible() blocked
forever. Because in this case, j1939_netdev_notify() won't be called and
j1939_tp_txtimer() won't call j1939_session_cancel() or other function
to clear session for ENETDOWN error, this lead to mismatch of
j1939_session_get/put() and jsk->skb_pending will never decrease to
zero.

To reproduce it use following commands:
1. ip link add dev vcan0 type vcan
2. j1939acd -r 100,80-120 1122334455667788 vcan0
3. presses ctrl-c and thread will be blocked forever

This patch adds check for ndev->flags in j1939_sk_bind() to avoid this
kind of situation and return with -ENETDOWN.

Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Signed-off-by: Zhang Changzhong <redacted>

Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>

Thank you!

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |