Re: [PATCH 3/5] net: fec: initialize clock with 0 rather than current kernel time
From: Sergey Organov <hidden>
Date: 2020-07-07 17:09:12
Vladimir Oltean [off-list ref] writes:
On Tue, Jul 07, 2020 at 07:07:08PM +0300, Sergey Organov wrote:quoted
Vladimir Oltean [off-list ref] writes:quoted
What do you mean 'no ticking', and what do you mean by 'non-initialized clock' exactly? I don't know if the fec driver is special in any way, do you mean that multiple runs of $(phc_ctl /dev/ptp0 get) from user space all return 0? That is not at all what is to be expected, I think. The PHC is always ticking. Its time is increasing.That's how it is right now. My point is that it likely shouldn't. Why is it ticking when nobody needs it? Does it draw more power due to that?quoted
What would be that initialization procedure that makes it tick, and who is doing it (and when)?The user space code that cares, obviously. Most probably some PTP stack daemon. I'd say that any set clock time ioctl() should start the clock, or yet another ioctl() that enables/disables the clock, whatever.That ioctl doesn't exist, at least not in PTP land. This also addresses your previous point.
struct timespec ts; ... clock_settime(clkid, &ts) That's the starting point of my own code, and I bet it's there in PTP for Linux, as well as in PTPD, as I fail to see how it could possibly work without it.
quoted
quoted
quoted
quoted
Whatever the default value of the clock may be, it's bound to be confusing for some reason, _if_ the reason why you're investigating it in the first place is a driver bug. Also, I don't really see how your change to use Jan 1st 1970 makes it any less confusing.When I print the clocks in application, I see seconds and milliseconds part since epoch. With this patch seconds count from 0, that simply match uptime. Easy to tell from any other (malfunctioning) clock.It doesn't really match uptime (CLOCK_MONOTONIC). Instead, it is just initialized with zero. If you have fec built as module and you insmod it after a few days of uptime, it will not track CLOCK_MONOTONIC at all. Not to say that there's anything wrong with initializing it with 0. It's just that I don't see why it would be objectively better.Well, it would have been better for me in my particular quest to find the problem, so it rather needs to be shown where initializing with kernel time is objectively better. Moreover, everything else being equal, 0 is always better, just because of simplicity.quoted
quoted
Here is the description of confusion and improvement. I spent half a day not realizing that I sometimes get timestamps from the wrong PTP clock.There is a suite of tests in tools/testing/selftests/ptp/ which is useful in debugging problems like this. Alternatively, you can write to each individual clock using $(phc_ctl /dev/ptpN set 0) and check your timestamps again. If the timestamps don't nudge, it's clear that the timestamps you're getting are not from the PHC you've written to. Much simpler.Maybe. Once you do figure there is another clock in the system and/or that that clock is offending. In my case /that/ was the hard part, not changing that offending clock, once found, to whatever.And my point was that you could have been in a different situation, when all of your clocks could have been ticking in 1970, so this wouldn't have been a distiguishing point. So this argument is poor. Using phc_ctl, or scripts around that, is much more dynamic.quoted
quoted
quoted
Part of the problem is that kernel time at startup, when it is used for initialization of the PTP clock, is in fact somewhat random, and it could be off by a few seconds.Yes, the kernel time at startup is exactly random (not traceable to any clock reference). And so is the PHC.quoted
Now, when in application I get time stamp that is almost right, and then another one that is, say, 9 seconds off, what should I think? Right, that I drive PTP clock wrongly. Now, when one of those timestamps is almost 0, I see immediately I got time from wrong PTP clock, rather than wrong time from correct PTP clock.There are 2 points to be made here: 1. There are simpler ways to debug your issue than to leave a patch in the kernel, like the "phc_ctl set 0" I mentioned above. This can be considered a debugging patch which is also going to have consequences for the other users of the driver, if applied. We need to consider whether the change in behavior is useful in general.This does not apply to my particular case as I explained above, and then ease with debug is just a nice side-effect of code simplification.quoted
2. There are boards out there which don't have any battery-backed RTC, so CLOCK_REALTIME could be ticking in Jan 1970 already, and therefore the PHC would be initialized with a time in 1970. Or your GM might be configured to be ticking in Jan 1970 (there are some applications that only require the network to be synchronized, but not for the time to be traceable to TAI). How does your change make a difference to eliminate confusion there, when all of your clocks are going to be in 1970? It doesn't make a net difference. Bottom line, a clock initialized with 0 doesn't mean it's special in any way. You _could_ make that change in your debugging environment, and it _could_ be useful to your debugging, but if it's not universally useful, I wouldn't try to patch the kernel with this change.If there is nothing special about any value, 0 is the value to choose, because of simplicity. Once again, I only explained debugging advantages because you've asked about it. It's just a nice side-effect, as it often happens to be when one keeps things as simple as possible.quoted
Please note that, although my comments appear to be in disagreement with your idea, they are in fact not at all. It's just that, if there's a a particular answer to "what time to initialize a PHC with" that is more favourable than the rest (even though the question itself is a bit irrelevant overall), then that answer ought to be enforced kernel-wide, I think.As everybody, I believe in a set of generic programming principles that are not to be violated lightly. KISS is one of the principles I believe, and trying to be clever with no apparent reason is one way of violating it. Overall, here is my argument: 0 is simpler than kernel time, so how is it useful to initialize PTP with kernel time that is as wrong as a value for PTP time as 0?And overall, my argument is: you are making a user-visible change, for basically no strong reason, other than the fact that you like zero better. You're trying to reduce confusion, not increase it, right?
No, not to increase, and I believe there is no way to increase it by using the value that at least some of the drivers already use.
I agree with the basic fact that zero is a simpler and more consistent value to initialize a PHC with, than the system time. As I've already shown to you, I even attempted to make a similar change to the ptp_qoriq driver which was rejected. So I hoped that you could bring some better arguments than "I believe 0 is simpler". Since no value is right, no value is wrong either, so why make a change in the first place? The only value in _changing_ to zero would be if all drivers were changed to use it consistently, IMO. But I will stop here and let the PTP maintainer make a choice. I only intervened because I knew what the default answer was going to be.
Thanks, so will I, as I won't care much either way, just wanted to make life of somebody who might travel my path less painful. That person is not who is already fluent in all the different opportunities to debug PTP clocks, for sure. Thanks, -- Sergey