[PATCH] net: wireless: marvell: libertas: Use new structure for SPI transfer delays
From: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Date: 2020-02-27 14:07:29
In a recent change to the SPI subsystem [1], a new `delay` struct was added
to replace the `delay_usecs`. This change replaces the current
`delay_usecs` with `delay` for this driver.
The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure
that both `delay_usecs` & `delay` are used (in this order to preserve
backwards compatibility).
[1] commit bebcfd272df6 ("spi: introduce `delay` field for
`spi_transfer` + spi_transfer_delay_exec()")
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
---
drivers/net/wireless/marvell/libertas/if_spi.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/marvell/libertas/if_spi.c b/drivers/net/wireless/marvell/libertas/if_spi.c
index d07fe82c557e..3c3f266bf116 100644
--- a/drivers/net/wireless/marvell/libertas/if_spi.c
+++ b/drivers/net/wireless/marvell/libertas/if_spi.c@@ -235,8 +235,9 @@ static int spu_read(struct if_spi_card *card, u16 reg, u8 *buf, int len) spi_message_add_tail(&dummy_trans, &m); } else { /* Busy-wait while the SPU fills the FIFO */ - reg_trans.delay_usecs = + reg_trans.delay.value = DIV_ROUND_UP((100 + (delay * 10)), 1000); + reg_trans.delay.unit = SPI_DELAY_UNIT_USECS; } /* read in data */
--
2.17.1