# Re: \[PATCH v5 net-next 00/12\] net: ethernet: ti: introduce new cpsw switchdev based driver

- From: Tony Lindgren \<tony@atomide.com\>
- Date: 2019-11-11 17:08:45 
- List: netdev
- Page: https://ratatoskr.run/netdev/2019/11/5772420
- Thread: https://ratatoskr.run/netdev/2019/10/5754706/t.md

```text
* Grygorii Strashko [ref] [191109 15:16]:
> Hi Tony,
> 
> On 24/10/2019 19:05, Tony Lindgren wrote:
> > Hi,
> > 
> > * Grygorii Strashko [ref] [191024 10:10]:
> > > This the RFC v5 which introduces new CPSW switchdev based driver which is
> > > operating in dual-emac mode by default, thus working as 2 individual
> > > network interfaces. The Switch mode can be enabled by configuring devlink driver
> > > parameter "switch_mode" to 1/true:
> > > 	devlink dev param set platform/48484000.ethernet_switch \
> > > 	name switch_mode value 1 cmode runtime
> > 
> > Just wondering about the migration plan.. Is this a replacement
> > driver or used in addition to the old driver?
> > 
> 
> Sry, I've missed you mail.
> 
> As it's pretty big change the idea is to keep both drivers at least for sometime.
> Step 1: add new driver and enable it on one platform. Do announcement.
> Step 2: switch all one-port and dual mac drivers to the new driver
> Step 3: switch all other platform to cpsw switchdev and deprecate old driver.

OK sounds good to me. So for the dts changes, we keep the old binding
and just add a new module there?

Or do you also have to disable some parts of the old dts?

Regards,

Tony
```
