# \[PATCH AUTOSEL 4.14 01/27\] net: tundra: tsi108: use spin\_lock\_irqsave instead of spin\_lock\_irq in IRQ context - From: Sasha Levin \ - Date: 2019-08-29 18:17:06 - List: netdev - Page: https://ratatoskr.run/netdev/2019/08/5703438 - Thread: https://ratatoskr.run/stable/2019/08/5703438/t.md ```text From: Fuqian Huang [ Upstream commit 8c25d0887a8bd0e1ca2074ac0c6dff173787a83b ] As spin_unlock_irq will enable interrupts. Function tsi108_stat_carry is called from interrupt handler tsi108_irq. Interrupts are enabled in interrupt handler. Use spin_lock_irqsave/spin_unlock_irqrestore instead of spin_(un)lock_irq in IRQ context to avoid this. Signed-off-by: Fuqian Huang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ethernet/tundra/tsi108_eth.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/tundra/tsi108_eth.c b/drivers/net/ethernet/tundra/tsi108_eth.c index c2d15d9c0c33b..455979e47424c 100644 --- a/drivers/net/ethernet/tundra/tsi108_eth.c +++ b/drivers/net/ethernet/tundra/tsi108_eth.c @@ -381,9 +381,10 @@ tsi108_stat_carry_one(int carry, int carry_bit, int carry_shift, static void tsi108_stat_carry(struct net_device *dev) { struct tsi108_prv_data *data = netdev_priv(dev); + unsigned long flags; u32 carry1, carry2; - spin_lock_irq(&data->misclock); + spin_lock_irqsave(&data->misclock, flags); carry1 = TSI_READ(TSI108_STAT_CARRY1); carry2 = TSI_READ(TSI108_STAT_CARRY2); @@ -451,7 +452,7 @@ static void tsi108_stat_carry(struct net_device *dev) TSI108_STAT_TXPAUSEDROP_CARRY, &data->tx_pause_drop); - spin_unlock_irq(&data->misclock); + spin_unlock_irqrestore(&data->misclock, flags); } /* Read a stat counter atomically with respect to carries. -- 2.20.1 ```