[PATCH] rtlwifi: rtl8821ae: replace _rtl8821ae_mrate_idx_to_arfr_id with generic version

Subsystems: realtek wireless driver (rtlwifi family), the rest

STALE2902d

3 messages, 3 authors, 2018-10-13 · open the first message on its own page

[PATCH] rtlwifi: rtl8821ae: replace _rtl8821ae_mrate_idx_to_arfr_id with generic version

From: Colin King <hidden>
Date: 2018-10-08 08:50:40

From: Colin Ian King <redacted>

Function _rtl8821ae_mrate_idx_to_arfr_id is functionally identical to
the generic version rtl_mrate_idx_to_arfr_id, so remove 
_rtl8821ae_mrate_idx_to_arfr_id and use the generic one instead.

This also fixes a missing break statement found by CoverityScan in
_rtl8821ae_mrate_idx_to_arfr_id, namely: CID#1167237 ("Missing break
in switch")

Thanks to Joe Perches for spotting this when I submitted an earlier patch.

Fixes: 3c05bedb5fef ("Staging: rtl8812ae: Add Realtek 8821 PCI WIFI driver")
Signed-off-by: Colin Ian King <redacted>
---
 .../wireless/realtek/rtlwifi/rtl8821ae/hw.c   | 71 +------------------
 1 file changed, 1 insertion(+), 70 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
index 317c1b3101da..ba258318ee9f 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
@@ -3404,75 +3404,6 @@ static void rtl8821ae_update_hal_rate_table(struct ieee80211_hw *hw,
 		 "%x\n", rtl_read_dword(rtlpriv, REG_ARFR0));
 }
 
-static u8 _rtl8821ae_mrate_idx_to_arfr_id(
-	struct ieee80211_hw *hw, u8 rate_index,
-	enum wireless_mode wirelessmode)
-{
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	struct rtl_phy *rtlphy = &rtlpriv->phy;
-	u8 ret = 0;
-	switch (rate_index) {
-	case RATR_INX_WIRELESS_NGB:
-		if (rtlphy->rf_type == RF_1T1R)
-			ret = 1;
-		else
-			ret = 0;
-		; break;
-	case RATR_INX_WIRELESS_N:
-	case RATR_INX_WIRELESS_NG:
-		if (rtlphy->rf_type == RF_1T1R)
-			ret = 5;
-		else
-			ret = 4;
-		; break;
-	case RATR_INX_WIRELESS_NB:
-		if (rtlphy->rf_type == RF_1T1R)
-			ret = 3;
-		else
-			ret = 2;
-		; break;
-	case RATR_INX_WIRELESS_GB:
-		ret = 6;
-		break;
-	case RATR_INX_WIRELESS_G:
-		ret = 7;
-		break;
-	case RATR_INX_WIRELESS_B:
-		ret = 8;
-		break;
-	case RATR_INX_WIRELESS_MC:
-		if ((wirelessmode == WIRELESS_MODE_B)
-			|| (wirelessmode == WIRELESS_MODE_G)
-			|| (wirelessmode == WIRELESS_MODE_N_24G)
-			|| (wirelessmode == WIRELESS_MODE_AC_24G))
-			ret = 6;
-		else
-			ret = 7;
-	case RATR_INX_WIRELESS_AC_5N:
-		if (rtlphy->rf_type == RF_1T1R)
-			ret = 10;
-		else
-			ret = 9;
-		break;
-	case RATR_INX_WIRELESS_AC_24N:
-		if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_80) {
-			if (rtlphy->rf_type == RF_1T1R)
-				ret = 10;
-			else
-				ret = 9;
-		} else {
-			if (rtlphy->rf_type == RF_1T1R)
-				ret = 11;
-			else
-				ret = 12;
-		}
-		break;
-	default:
-		ret = 0; break;
-	}
-	return ret;
-}
-
 static u32 _rtl8821ae_rate_to_bitmap_2ssvht(__le16 vht_rate)
 {
 	u8 i, j, tmp_rate;
@@ -3761,7 +3692,7 @@ static void rtl8821ae_update_hal_rate_mask(struct ieee80211_hw *hw,
 		break;
 	}
 
-	ratr_index = _rtl8821ae_mrate_idx_to_arfr_id(hw, ratr_index, wirelessmode);
+	ratr_index = rtl_mrate_idx_to_arfr_id(hw, ratr_index, wirelessmode);
 	sta_entry->ratr_index = ratr_index;
 	ratr_bitmap = _rtl8821ae_set_ra_vht_ratr_bitmap(hw, wirelessmode,
 							ratr_bitmap);
-- 
2.17.1

Re: [PATCH] rtlwifi: rtl8821ae: replace _rtl8821ae_mrate_idx_to_arfr_id with generic version

From: Larry Finger <hidden>
Date: 2018-10-08 15:53:47

On 10/8/18 3:50 AM, Colin King wrote:
quoted hunk
From: Colin Ian King <redacted>

Function _rtl8821ae_mrate_idx_to_arfr_id is functionally identical to
the generic version rtl_mrate_idx_to_arfr_id, so remove
_rtl8821ae_mrate_idx_to_arfr_id and use the generic one instead.

This also fixes a missing break statement found by CoverityScan in
_rtl8821ae_mrate_idx_to_arfr_id, namely: CID#1167237 ("Missing break
in switch")

Thanks to Joe Perches for spotting this when I submitted an earlier patch.

Fixes: 3c05bedb5fef ("Staging: rtl8812ae: Add Realtek 8821 PCI WIFI driver")
Signed-off-by: Colin Ian King <redacted>
---
  .../wireless/realtek/rtlwifi/rtl8821ae/hw.c   | 71 +------------------
  1 file changed, 1 insertion(+), 70 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
index 317c1b3101da..ba258318ee9f 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
@@ -3404,75 +3404,6 @@ static void rtl8821ae_update_hal_rate_table(struct ieee80211_hw *hw,
  		 "%x\n", rtl_read_dword(rtlpriv, REG_ARFR0));
  }
  
-static u8 _rtl8821ae_mrate_idx_to_arfr_id(
-	struct ieee80211_hw *hw, u8 rate_index,
-	enum wireless_mode wirelessmode)
-{
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
-	struct rtl_phy *rtlphy = &rtlpriv->phy;
-	u8 ret = 0;
-	switch (rate_index) {
-	case RATR_INX_WIRELESS_NGB:
-		if (rtlphy->rf_type == RF_1T1R)
-			ret = 1;
-		else
-			ret = 0;
-		; break;
-	case RATR_INX_WIRELESS_N:
-	case RATR_INX_WIRELESS_NG:
-		if (rtlphy->rf_type == RF_1T1R)
-			ret = 5;
-		else
-			ret = 4;
-		; break;
-	case RATR_INX_WIRELESS_NB:
-		if (rtlphy->rf_type == RF_1T1R)
-			ret = 3;
-		else
-			ret = 2;
-		; break;
-	case RATR_INX_WIRELESS_GB:
-		ret = 6;
-		break;
-	case RATR_INX_WIRELESS_G:
-		ret = 7;
-		break;
-	case RATR_INX_WIRELESS_B:
-		ret = 8;
-		break;
-	case RATR_INX_WIRELESS_MC:
-		if ((wirelessmode == WIRELESS_MODE_B)
-			|| (wirelessmode == WIRELESS_MODE_G)
-			|| (wirelessmode == WIRELESS_MODE_N_24G)
-			|| (wirelessmode == WIRELESS_MODE_AC_24G))
-			ret = 6;
-		else
-			ret = 7;
-	case RATR_INX_WIRELESS_AC_5N:
-		if (rtlphy->rf_type == RF_1T1R)
-			ret = 10;
-		else
-			ret = 9;
-		break;
-	case RATR_INX_WIRELESS_AC_24N:
-		if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_80) {
-			if (rtlphy->rf_type == RF_1T1R)
-				ret = 10;
-			else
-				ret = 9;
-		} else {
-			if (rtlphy->rf_type == RF_1T1R)
-				ret = 11;
-			else
-				ret = 12;
-		}
-		break;
-	default:
-		ret = 0; break;
-	}
-	return ret;
-}
-
  static u32 _rtl8821ae_rate_to_bitmap_2ssvht(__le16 vht_rate)
  {
  	u8 i, j, tmp_rate;
@@ -3761,7 +3692,7 @@ static void rtl8821ae_update_hal_rate_mask(struct ieee80211_hw *hw,
  		break;
  	}
  
-	ratr_index = _rtl8821ae_mrate_idx_to_arfr_id(hw, ratr_index, wirelessmode);
+	ratr_index = rtl_mrate_idx_to_arfr_id(hw, ratr_index, wirelessmode);
  	sta_entry->ratr_index = ratr_index;
  	ratr_bitmap = _rtl8821ae_set_ra_vht_ratr_bitmap(hw, wirelessmode,
  							ratr_bitmap);
ACKed-by: Larry Finger <redacted>

Thanks,

Larry

Re: [PATCH] rtlwifi: rtl8821ae: replace _rtl8821ae_mrate_idx_to_arfr_id with generic version

From: Kalle Valo <hidden>
Date: 2018-10-13 12:01:03

Colin King [off-list ref] wrote:
From: Colin Ian King <redacted>

Function _rtl8821ae_mrate_idx_to_arfr_id is functionally identical to
the generic version rtl_mrate_idx_to_arfr_id, so remove 
_rtl8821ae_mrate_idx_to_arfr_id and use the generic one instead.

This also fixes a missing break statement found by CoverityScan in
_rtl8821ae_mrate_idx_to_arfr_id, namely: CID#1167237 ("Missing break
in switch")

Thanks to Joe Perches for spotting this when I submitted an earlier patch.

Fixes: 3c05bedb5fef ("Staging: rtl8812ae: Add Realtek 8821 PCI WIFI driver")
Signed-off-by: Colin Ian King <redacted>
ACKed-by: Larry Finger <redacted>
Patch applied to wireless-drivers-next.git, thanks.

c894696188d5 rtlwifi: rtl8821ae: replace _rtl8821ae_mrate_idx_to_arfr_id with generic version

-- 
https://patchwork.kernel.org/patch/10630249/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help