[PATCH v2 0/2] tree-wide: use SPDX identifier for Renesas drivers

STALE2901d

Revision v2 of 2 in this series.

5 messages, 4 authors, 2018-08-27 · open the first message on its own page

[PATCH v2 0/2] tree-wide: use SPDX identifier for Renesas drivers

From: Wolfram Sang <wsa+renesas@sang-engineering.com>
Date: 2018-08-23 13:35:15

I am resending only the patches which needed the s/GPL-2.0-or-later/GPL-2.0+/
replacement. I fixed that and checkpatch is still happy.

Wolfram Sang (2):
  dmaengine: use SPDX identifier for Renesas drivers
  can: rcar: use SPDX identifier for Renesas drivers

 drivers/dma/nbpfaxi.c             | 5 +----
 drivers/dma/sh/shdma-arm.h        | 5 +----
 drivers/dma/sh/shdma-base.c       | 5 +----
 drivers/dma/sh/shdma-of.c         | 5 +----
 drivers/dma/sh/shdma-r8a73a4.c    | 5 +----
 drivers/dma/sh/shdma.h            | 6 +-----
 drivers/dma/sh/shdmac.c           | 6 +-----
 drivers/dma/sh/sudmac.c           | 5 +----
 drivers/dma/sh/usb-dmac.c         | 5 +----
 drivers/net/can/rcar/rcar_can.c   | 6 +-----
 drivers/net/can/rcar/rcar_canfd.c | 6 +-----
 11 files changed, 11 insertions(+), 48 deletions(-)

-- 
2.11.0

[PATCH v2 2/2] can: rcar: use SPDX identifier for Renesas drivers

From: Wolfram Sang <wsa+renesas@sang-engineering.com>
Date: 2018-08-23 13:35:23

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---

Change since V1: s/GPL-2.0-or-later/GPL-2.0+/

 drivers/net/can/rcar/rcar_can.c   | 6 +-----
 drivers/net/can/rcar/rcar_canfd.c | 6 +-----
 2 files changed, 2 insertions(+), 10 deletions(-)
diff --git a/drivers/net/can/rcar/rcar_can.c b/drivers/net/can/rcar/rcar_can.c
index 11662f479e76..06f90a0fdc93 100644
--- a/drivers/net/can/rcar/rcar_can.c
+++ b/drivers/net/can/rcar/rcar_can.c
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0+
 /* Renesas R-Car CAN device driver
  *
  * Copyright (C) 2013 Cogent Embedded, Inc. <source@cogentembedded.com>
  * Copyright (C) 2013 Renesas Solutions Corp.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
  */
 
 #include <linux/module.h>
diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c
index 602c19e23f05..05410008aa6b 100644
--- a/drivers/net/can/rcar/rcar_canfd.c
+++ b/drivers/net/can/rcar/rcar_canfd.c
@@ -1,11 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
 /* Renesas R-Car CAN FD device driver
  *
  * Copyright (C) 2015 Renesas Electronics Corp.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
  */
 
 /* The R-Car CAN FD controller can operate in either one of the below two modes
-- 
2.11.0

Re: [PATCH v2 2/2] can: rcar: use SPDX identifier for Renesas drivers

From: Simon Horman <horms@verge.net.au>
Date: 2018-08-24 09:18:58

On Thu, Aug 23, 2018 at 03:34:55PM +0200, Wolfram Sang wrote:
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <redacted>

Re: [PATCH v2 2/2] can: rcar: use SPDX identifier for Renesas drivers

From: Marc Kleine-Budde <mkl@pengutronix.de>
Date: 2018-08-27 12:37:39

On 08/23/2018 03:34 PM, Wolfram Sang wrote:
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Applied to linux-can-next. Please add a patch description to the patch.
My $UPSTREAM doesn't like empty patch descriptions :) I've shamelessly
used Fabio Estevam patch description from his flexcan SPDX patch.

Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

Re: [PATCH v2 2/2] can: rcar: use SPDX identifier for Renesas drivers

From: Wolfram Sang <hidden>
Date: 2018-08-27 19:45:12

Applied to linux-can-next. Please add a patch description to the patch.
My $UPSTREAM doesn't like empty patch descriptions :) I've shamelessly
used Fabio Estevam patch description from his flexcan SPDX patch.
Thx, Marc!
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help