[PATCH v2 0/4] Slience NCSI logging

STALE2966d

Revision v2 of 2 in this series.

6 messages, 2 authors, 2018-06-19 · open the first message on its own page

[PATCH v2 0/4] Slience NCSI logging

From: Joel Stanley <joel@jms.id.au>
Date: 2018-06-19 05:38:44

v2:
  Fix indent issue and commit message based on Joe's feedback
  Add Sam's acks

Here are three changes to silence unnecessary warnings in the ncsi code.

The final patch adds Sam as the maintainer for NCSI.

Joel Stanley (4):
  net/ncsi: Silence debug messages
  net/ncsi: Drop no more channels message
  net/ncsi: Use netdev_dbg for debug messages
  MAINTAINERS: Add Sam as the maintainer for NCSI

 MAINTAINERS                              |  5 +++
 drivers/net/ethernet/faraday/ftgmac100.c |  4 +-
 net/ncsi/ncsi-aen.c                      | 10 ++---
 net/ncsi/ncsi-manage.c                   | 49 +++++++++++-------------
 4 files changed, 34 insertions(+), 34 deletions(-)

-- 
2.17.1

[PATCH v2 1/4] net/ncsi: Silence debug messages

From: Joel Stanley <joel@jms.id.au>
Date: 2018-06-19 05:38:51

In normal operation we see this series of messages as the host drives
the network device:

 ftgmac100 1e660000.ethernet eth0: NCSI: LSC AEN - channel 0 state down
 ftgmac100 1e660000.ethernet eth0: NCSI: suspending channel 0
 ftgmac100 1e660000.ethernet eth0: NCSI: configuring channel 0
 ftgmac100 1e660000.ethernet eth0: NCSI: channel 0 link down after config
 ftgmac100 1e660000.ethernet eth0: NCSI interface down
 ftgmac100 1e660000.ethernet eth0: NCSI: LSC AEN - channel 0 state up
 ftgmac100 1e660000.ethernet eth0: NCSI: configuring channel 0
 ftgmac100 1e660000.ethernet eth0: NCSI interface up
 ftgmac100 1e660000.ethernet eth0: NCSI: LSC AEN - channel 0 state down
 ftgmac100 1e660000.ethernet eth0: NCSI: suspending channel 0
 ftgmac100 1e660000.ethernet eth0: NCSI: configuring channel 0
 ftgmac100 1e660000.ethernet eth0: NCSI: channel 0 link down after config
 ftgmac100 1e660000.ethernet eth0: NCSI interface down
 ftgmac100 1e660000.ethernet eth0: NCSI: LSC AEN - channel 0 state up
 ftgmac100 1e660000.ethernet eth0: NCSI: configuring channel 0
 ftgmac100 1e660000.ethernet eth0: NCSI interface up

This makes all of these messages netdev_dbg. They are still useful to
debug eg. misbehaving network device firmware, but we do not need them
filling up the kernel logs in normal operation.

Acked-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
v2: Fix alignment in ftgmac100 change
---
 drivers/net/ethernet/faraday/ftgmac100.c |  4 ++--
 net/ncsi/ncsi-aen.c                      |  4 ++--
 net/ncsi/ncsi-manage.c                   | 14 +++++++-------
 3 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index 78db8e62a83f..ed6c76d20b45 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c

@@ -1735,8 +1735,8 @@ static void ftgmac100_ncsi_handler(struct ncsi_dev *nd)
 	if (unlikely(nd->state != ncsi_dev_state_functional))
 		return;
 
-	netdev_info(nd->dev, "NCSI interface %s\n",
-		    nd->link_up ? "up" : "down");
+	netdev_dbg(nd->dev, "NCSI interface %s\n",
+		   nd->link_up ? "up" : "down");
 }
 
 static void ftgmac100_setup_clk(struct ftgmac100 *priv)

diff --git a/net/ncsi/ncsi-aen.c b/net/ncsi/ncsi-aen.c
index e7b05de1e6d1..f899ed61bb57 100644
--- a/net/ncsi/ncsi-aen.c
+++ b/net/ncsi/ncsi-aen.c

@@ -73,8 +73,8 @@ static int ncsi_aen_handler_lsc(struct ncsi_dev_priv *ndp,
 	ncm->data[2] = data;
 	ncm->data[4] = ntohl(lsc->oem_status);
 
-	netdev_info(ndp->ndev.dev, "NCSI: LSC AEN - channel %u state %s\n",
-		    nc->id, data & 0x1 ? "up" : "down");
+	netdev_dbg(ndp->ndev.dev, "NCSI: LSC AEN - channel %u state %s\n",
+		   nc->id, data & 0x1 ? "up" : "down");
 
 	chained = !list_empty(&nc->link);
 	state = nc->state;

diff --git a/net/ncsi/ncsi-manage.c b/net/ncsi/ncsi-manage.c
index 5561e221b71f..616441c2b54f 100644
--- a/net/ncsi/ncsi-manage.c
+++ b/net/ncsi/ncsi-manage.c

@@ -816,9 +816,9 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
 		} else {
 			hot_nc = NULL;
 			nc->state = NCSI_CHANNEL_INACTIVE;
-			netdev_warn(ndp->ndev.dev,
-				    "NCSI: channel %u link down after config\n",
-				    nc->id);
+			netdev_dbg(ndp->ndev.dev,
+				   "NCSI: channel %u link down after config\n",
+				   nc->id);
 		}
 		spin_unlock_irqrestore(&nc->lock, flags);

@@ -1199,14 +1199,14 @@ int ncsi_process_next_channel(struct ncsi_dev_priv *ndp)
 	switch (old_state) {
 	case NCSI_CHANNEL_INACTIVE:
 		ndp->ndev.state = ncsi_dev_state_config;
-		netdev_info(ndp->ndev.dev, "NCSI: configuring channel %u\n",
-			    nc->id);
+		netdev_dbg(ndp->ndev.dev, "NCSI: configuring channel %u\n",
+	                   nc->id);
 		ncsi_configure_channel(ndp);
 		break;
 	case NCSI_CHANNEL_ACTIVE:
 		ndp->ndev.state = ncsi_dev_state_suspend;
-		netdev_info(ndp->ndev.dev, "NCSI: suspending channel %u\n",
-			    nc->id);
+		netdev_dbg(ndp->ndev.dev, "NCSI: suspending channel %u\n",
+			   nc->id);
 		ncsi_suspend_channel(ndp);
 		break;
 	default:

-- 
2.17.1

[PATCH v2 2/4] net/ncsi: Drop no more channels message

From: Joel Stanley <joel@jms.id.au>
Date: 2018-06-19 05:38:58

This does not provide useful information. As the ncsi maintainer said:

 > either we get a channel or broadcom has gone out to lunch

Acked-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
 net/ncsi/ncsi-manage.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/net/ncsi/ncsi-manage.c b/net/ncsi/ncsi-manage.c
index 616441c2b54f..716493a61ba6 100644
--- a/net/ncsi/ncsi-manage.c
+++ b/net/ncsi/ncsi-manage.c

@@ -1226,8 +1226,6 @@ int ncsi_process_next_channel(struct ncsi_dev_priv *ndp)
 		return ncsi_choose_active_channel(ndp);
 	}
 
-	netdev_printk(KERN_DEBUG, ndp->ndev.dev,
-		      "NCSI: No more channels to process\n");
 	ncsi_report_link(ndp, false);
 	return -ENODEV;
 }

-- 
2.17.1

[PATCH v2 3/4] net/ncsi: Use netdev_dbg for debug messages

From: Joel Stanley <joel@jms.id.au>
Date: 2018-06-19 05:39:05

This moves all of the netdev_printk(KERN_DEBUG, ...) messages over to
netdev_dbg.

As Joe explains:

netdev_dbg is not included in object code unless
DEBUG is defined or CONFIG_DYNAMIC_DEBUG is set.
And then, it is not emitted into the log unless
DEBUG is set or this specific netdev_dbg is enabled
via the dynamic debug control file.

Which is what we're after in this case.

Acked-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
v2: update commit message

 net/ncsi/ncsi-aen.c    |  6 +++---
 net/ncsi/ncsi-manage.c | 33 +++++++++++++++------------------
 2 files changed, 18 insertions(+), 21 deletions(-)

diff --git a/net/ncsi/ncsi-aen.c b/net/ncsi/ncsi-aen.c
index f899ed61bb57..25e483e8278b 100644
--- a/net/ncsi/ncsi-aen.c
+++ b/net/ncsi/ncsi-aen.c

@@ -148,9 +148,9 @@ static int ncsi_aen_handler_hncdsc(struct ncsi_dev_priv *ndp,
 	hncdsc = (struct ncsi_aen_hncdsc_pkt *)h;
 	ncm->data[3] = ntohl(hncdsc->status);
 	spin_unlock_irqrestore(&nc->lock, flags);
-	netdev_printk(KERN_DEBUG, ndp->ndev.dev,
-		      "NCSI: host driver %srunning on channel %u\n",
-		      ncm->data[3] & 0x1 ? "" : "not ", nc->id);
+	netdev_dbg(ndp->ndev.dev,
+		   "NCSI: host driver %srunning on channel %u\n",
+		   ncm->data[3] & 0x1 ? "" : "not ", nc->id);
 
 	return 0;
 }

diff --git a/net/ncsi/ncsi-manage.c b/net/ncsi/ncsi-manage.c
index 716493a61ba6..091284760d21 100644
--- a/net/ncsi/ncsi-manage.c
+++ b/net/ncsi/ncsi-manage.c

@@ -788,8 +788,8 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
 		}
 		break;
 	case ncsi_dev_state_config_done:
-		netdev_printk(KERN_DEBUG, ndp->ndev.dev,
-			      "NCSI: channel %u config done\n", nc->id);
+		netdev_dbg(ndp->ndev.dev, "NCSI: channel %u config done\n",
+			   nc->id);
 		spin_lock_irqsave(&nc->lock, flags);
 		if (nc->reconfigure_needed) {
 			/* This channel's configuration has been updated

@@ -804,8 +804,7 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
 			list_add_tail_rcu(&nc->link, &ndp->channel_queue);
 			spin_unlock_irqrestore(&ndp->lock, flags);
 
-			netdev_printk(KERN_DEBUG, dev,
-				      "Dirty NCSI channel state reset\n");
+			netdev_dbg(dev, "Dirty NCSI channel state reset\n");
 			ncsi_process_next_channel(ndp);
 			break;
 		}

@@ -908,9 +907,9 @@ static int ncsi_choose_active_channel(struct ncsi_dev_priv *ndp)
 	}
 
 	ncm = &found->modes[NCSI_MODE_LINK];
-	netdev_printk(KERN_DEBUG, ndp->ndev.dev,
-		      "NCSI: Channel %u added to queue (link %s)\n",
-		      found->id, ncm->data[2] & 0x1 ? "up" : "down");
+	netdev_dbg(ndp->ndev.dev,
+		   "NCSI: Channel %u added to queue (link %s)\n",
+		   found->id, ncm->data[2] & 0x1 ? "up" : "down");
 
 out:
 	spin_lock_irqsave(&ndp->lock, flags);

@@ -1316,9 +1315,9 @@ static int ncsi_kick_channels(struct ncsi_dev_priv *ndp)
 				if ((ndp->ndev.state & 0xff00) ==
 						ncsi_dev_state_config ||
 						!list_empty(&nc->link)) {
-					netdev_printk(KERN_DEBUG, nd->dev,
-						      "NCSI: channel %p marked dirty\n",
-						      nc);
+					netdev_dbg(nd->dev,
+						   "NCSI: channel %p marked dirty\n",
+						   nc);
 					nc->reconfigure_needed = true;
 				}
 				spin_unlock_irqrestore(&nc->lock, flags);

@@ -1336,8 +1335,7 @@ static int ncsi_kick_channels(struct ncsi_dev_priv *ndp)
 			list_add_tail_rcu(&nc->link, &ndp->channel_queue);
 			spin_unlock_irqrestore(&ndp->lock, flags);
 
-			netdev_printk(KERN_DEBUG, nd->dev,
-				      "NCSI: kicked channel %p\n", nc);
+			netdev_dbg(nd->dev, "NCSI: kicked channel %p\n", nc);
 			n++;
 		}
 	}

@@ -1368,8 +1366,8 @@ int ncsi_vlan_rx_add_vid(struct net_device *dev, __be16 proto, u16 vid)
 	list_for_each_entry_rcu(vlan, &ndp->vlan_vids, list) {
 		n_vids++;
 		if (vlan->vid == vid) {
-			netdev_printk(KERN_DEBUG, dev,
-				      "NCSI: vid %u already registered\n", vid);
+			netdev_dbg(dev, "NCSI: vid %u already registered\n",
+				   vid);
 			return 0;
 		}
 	}

@@ -1388,7 +1386,7 @@ int ncsi_vlan_rx_add_vid(struct net_device *dev, __be16 proto, u16 vid)
 	vlan->vid = vid;
 	list_add_rcu(&vlan->list, &ndp->vlan_vids);
 
-	netdev_printk(KERN_DEBUG, dev, "NCSI: Added new vid %u\n", vid);
+	netdev_dbg(dev, "NCSI: Added new vid %u\n", vid);
 
 	found = ncsi_kick_channels(ndp) != 0;

@@ -1417,8 +1415,7 @@ int ncsi_vlan_rx_kill_vid(struct net_device *dev, __be16 proto, u16 vid)
 	/* Remove the VLAN id from our internal list */
 	list_for_each_entry_safe(vlan, tmp, &ndp->vlan_vids, list)
 		if (vlan->vid == vid) {
-			netdev_printk(KERN_DEBUG, dev,
-				      "NCSI: vid %u found, removing\n", vid);
+			netdev_dbg(dev, "NCSI: vid %u found, removing\n", vid);
 			list_del_rcu(&vlan->list);
 			found = true;
 			kfree(vlan);

@@ -1545,7 +1542,7 @@ void ncsi_stop_dev(struct ncsi_dev *nd)
 		}
 	}
 
-	netdev_printk(KERN_DEBUG, ndp->ndev.dev, "NCSI: Stopping device\n");
+	netdev_dbg(ndp->ndev.dev, "NCSI: Stopping device\n");
 	ncsi_report_link(ndp, true);
 }
 EXPORT_SYMBOL_GPL(ncsi_stop_dev);

-- 
2.17.1

[PATCH v2 4/4] MAINTAINERS: Add Sam as the maintainer for NCSI

From: Joel Stanley <joel@jms.id.au>
Date: 2018-06-19 05:39:12

Sam has been handing the maintenance of NCSI for a number release cycles
now.

Acked-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
 MAINTAINERS | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 9d5eeff51b5f..44851f7c46fc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS

@@ -9756,6 +9756,11 @@ L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/NCR_D700.*
 
+NCSI LIBRARY:
+M:	Samuel Mendoza-Jonas <sam@mendozajonas.com>
+S:	Maintained
+F:	net/ncsi/
+
 NCT6775 HARDWARE MONITOR DRIVER
 M:	Guenter Roeck <linux@roeck-us.net>
 L:	linux-hwmon@vger.kernel.org

-- 
2.17.1

Re: [PATCH v2 0/4] Slience NCSI logging

From: David Miller <davem@davemloft.net>
Date: 2018-06-19 22:27:17

From: Joel Stanley <joel@jms.id.au>
Date: Tue, 19 Jun 2018 15:08:30 +0930

v2:
  Fix indent issue and commit message based on Joe's feedback
  Add Sam's acks

Here are three changes to silence unnecessary warnings in the ncsi code.

The final patch adds Sam as the maintainer for NCSI.

Series applied.

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help