[PATCH 1/2] net: can: sja1000: Replace mdelay with usleep_range in peak_pci_probe

peak_pci_probe() is never called in atomic context.

peak_pci_probe() is set as ".probe" in struct pci_driver.

Despite never getting called from atomic context, peak_pci_probe()
calls mdelay() to busily wait.
This is not necessary and can be replaced with usleep_range() to
avoid busy waiting.

This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.

Signed-off-by: Jia-Ju Bai <redacted>
---
 drivers/net/can/sja1000/peak_pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/can/sja1000/peak_pci.c b/drivers/net/can/sja1000/peak_pci.c
index 131026f..48cf821 100644
--- a/drivers/net/can/sja1000/peak_pci.c
+++ b/drivers/net/can/sja1000/peak_pci.c

@@ -608,7 +608,7 @@ static int peak_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	writeb(0x00, cfg_base + PITA_GPIOICR);
 	/* Toggle reset */
 	writeb(0x05, cfg_base + PITA_MISC + 3);
-	mdelay(5);
+	usleep_range(5000, 6000);
 	/* Leave parport mux mode */
 	writeb(0x04, cfg_base + PITA_MISC + 3);
 

-- 
1.9.1

On 04/11/2018 03:42 AM, Jia-Ju Bai wrote:

peak_pci_probe() is never called in atomic context.

peak_pci_probe() is set as ".probe" in struct pci_driver.

Despite never getting called from atomic context, peak_pci_probe()
calls mdelay() to busily wait.
This is not necessary and can be replaced with usleep_range() to
avoid busy waiting.

This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.

Signed-off-by: Jia-Ju Bai <redacted>

Applied both to linux-can-next.

tnx,
Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |