[PATCH net] net: fec: Fix unbalanced PM runtime calls

When unbinding/removing the driver, we will run into the following warnings:

[  259.655198] fec 400d1000.ethernet: 400d1000.ethernet supply phy not found, using dummy regulator
[  259.665065] fec 400d1000.ethernet: Unbalanced pm_runtime_enable!
[  259.672770] fec 400d1000.ethernet (unnamed net_device) (uninitialized): Invalid MAC address: 00:00:00:00:00:00
[  259.683062] fec 400d1000.ethernet (unnamed net_device) (uninitialized): Using random MAC address: f2:3e:93:b7:29:c1
[  259.696239] libphy: fec_enet_mii_bus: probed

Avoid these warnings by balancing the runtime PM calls during fec_drv_remove().

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/ethernet/freescale/fec_main.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 7a7f3a42b2aa..d4604bc8eb5b 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c

@@ -3600,6 +3600,8 @@ fec_drv_remove(struct platform_device *pdev)
 	fec_enet_mii_remove(fep);
 	if (fep->reg_phy)
 		regulator_disable(fep->reg_phy);
+	pm_runtime_put(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
 	if (of_phy_is_fixed_link(np))
 		of_phy_deregister_fixed_link(np);
 	of_node_put(fep->phy_node);

-- 
2.14.1

From: Florian Fainelli <f.fainelli@gmail.com>
Date: Sun, 18 Mar 2018 12:49:51 -0700

When unbinding/removing the driver, we will run into the following warnings:

[  259.655198] fec 400d1000.ethernet: 400d1000.ethernet supply phy not found, using dummy regulator
[  259.665065] fec 400d1000.ethernet: Unbalanced pm_runtime_enable!
[  259.672770] fec 400d1000.ethernet (unnamed net_device) (uninitialized): Invalid MAC address: 00:00:00:00:00:00
[  259.683062] fec 400d1000.ethernet (unnamed net_device) (uninitialized): Using random MAC address: f2:3e:93:b7:29:c1
[  259.696239] libphy: fec_enet_mii_bus: probed

Avoid these warnings by balancing the runtime PM calls during fec_drv_remove().

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Applied, thank you.

Queue this up for -stable?

On 03/18/2018 01:35 PM, David Miller wrote:

From: Florian Fainelli <f.fainelli@gmail.com>
Date: Sun, 18 Mar 2018 12:49:51 -0700

quoted

When unbinding/removing the driver, we will run into the following warnings:

[  259.655198] fec 400d1000.ethernet: 400d1000.ethernet supply phy not found, using dummy regulator
[  259.665065] fec 400d1000.ethernet: Unbalanced pm_runtime_enable!
[  259.672770] fec 400d1000.ethernet (unnamed net_device) (uninitialized): Invalid MAC address: 00:00:00:00:00:00
[  259.683062] fec 400d1000.ethernet (unnamed net_device) (uninitialized): Using random MAC address: f2:3e:93:b7:29:c1
[  259.696239] libphy: fec_enet_mii_bus: probed

Avoid these warnings by balancing the runtime PM calls during fec_drv_remove().

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Applied, thank you.

Queue this up for -stable?

I would be inclined to say yes, it was not exactly easy to track down a
set of commits, since this was changed quite a bit.
-- 
Florian

From: Florian Fainelli <f.fainelli@gmail.com>
Date: Sun, 18 Mar 2018 14:42:22 -0700

On 03/18/2018 01:35 PM, David Miller wrote:

quoted

Queue this up for -stable?

I would be inclined to say yes, it was not exactly easy to track down a
set of commits, since this was changed quite a bit.

Ok, queued up.